Table of Contents
The typical height for a toe kick is 3.5″, but many of these look a little taller. Increasing the height of the toe kick is one way to give it a little extra prominence and emphasize interesting materials, but keep in mind that you’ll lose a few inches in the height of your lower cabinets.
How big is a toe kick?
Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches. The toe kick is an ergonomic feature which places countertops and cabinets within arm’s length.
How much room do you need for a toe kick?
Standard Dimensions for Toe Kicks The optimal depth for a toe kick is 3 inches. This provides an adequate recess to stand comfortably and maintain balance while working at a countertop. Almost all factory-made stock cabinets will comply with this depth standard.
What is the minimum height of a toe board kickboard?
Toe boards should have a minimum height of 150mm, however typically on tube and fitting scaffold structures toe boards are 225mm scaffold boards.
How far recessed is a toe kick?
Most toe kicks are four inches high and recessed 3 inches, but both methods allow for customization. There are some situations where a higher toe kick is needed and some cabinets don’t need to be as deep.
What is the average height of a counter?
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
What kind of wood is used for toe kicks?
The most common materials used for making toe kicks are laminated wood and paint-grade ¾-inch plywood. For support blocks, you can use cedar shims or plywood blocks.
Do you install toe kicks before or after flooring?
Regardless of what you choose, the established standard for the top of the counter is about 36 inches above the floor. It’s also important to note that, if you’re including toe kick drawers in your kitchen design, put flooring down first to ensure that the bottom drawers can function properly.
Is a toe kick necessary?
Why Would I Need A Toe Kick Molding? Toe kick spaces are an important element of kitchen design. In fact, any cabinet that you would stand in front of should have one. The purpose of a toe kick is to create a recess for your feet, which allows you to stand closer to the countertop or workspace more comfortably.
Should toe kick match cabinets?
To avoid standing out, most toe kicks are painted either black the same color as the cabinets. They are there to serve a practical purpose, after all. According to the trend-setters at Apartment Therapy, that doesn’t always have to be the case.
What is the standard base cabinet height?
Base cabinets: Rest on floor to support countertop. Typically, between 34 1/2 to 36 inches tall and 24 to 30 inches deep.
Do Ikea cabinets come with toe kick?
Legs are required to keep the cabinet boxes off of the floor. Toe kicks are optional and are not used with all legs.
How high is a kitchen kickboard?
A kickboard height is 150mm but can range between 100mm-200mm. This all depends on how tall you are and the benchtop height could range from 850mm-1000mm.
How deep are IKEA toe kicks?
(Read our helpful post on where to place the dishwasher.) Pay attention to the thickness of the countertop. The most common sizes are 1 1/4″ & 1 1/2″ depending on the material and construction. (Read our helpful post on how to choose a countertop for your IKEA kitchen.)Dec 27, 2012.
What is shoe molding?
Paired with a baseboard and painted to match, shoe moulding (also called “base shoe”) is a thin strip of moulding that finishes out the look of baseboards. It can often be found in a curved or round shape similar to quarter round moulding.
Does baseboard go under cabinets?
Basic Moldings Standard baseboard trim is usually too tall to fit under cabinets. Typical door or window casing, sometimes referred to as ranch-base or colonial trim, is no thicker than 5/8 inch and is generally between 2 1/4 and 2 1/2 inches tall. The profile consists of a rounded, tapered edge from top to bottom.
What is the height of kitchen island?
A standard counter-height kitchen island is 36 inches high while a bar-height kitchen island is 42 inches high.
What is bathroom counter height?
Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches.
How high is a kitchen table?
Although the average kitchen table height is anywhere from 28 to 32 inches, there are several styles of dining room tables to choose from. Depending on your design style, the size of your space, and how often you use your dining room table, you might prefer something a bit taller.
Can I glue toe kick?
Toe kick is attached with a nail gun or adhesive after the cabinets are installed.
What are cabinet toe kicks made of?
They’re usually made of paint grade 3/4” plywood and can be assembled in the shop. They’re quick to install and level on site using support blocks made from scrap plywood and cedar shims. This is the preferred method for kicks on the custom cabinets that I deal with everyday.
What is a kick plate for cabinets?
A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop. This improves your balance,and also reduces the fatigue that would result if you were forced to reach across a countertop to work.
