Table of Contents
No Heat Required. Fill It With Fire-Ready Logs Anyway. Embrace a More Organic Design. Fake Stacked Logs With a DIY Summer Front. Place Tiered Candles Inside. Cover It With an Ornate Fire Screen. Use It as a Shadow Box to Display a Favorite Object. Handsome Firebox.
Can you just cover up a fireplace?
“You can also cover/seal the fireplace opening with brick or drywall if you want to eliminate the fireplace altogether,” says Blaken. You could build a drywall fireplace cover or hire a pro to do it for you. Some drywall fireplace covers act like a plug and can be removed from the opening at will.
How do I turn my fireplace into storage?
Turn an unused fireplace into storage. Simply cap the gas line, build a box with a shelf that is large enough to insert into the fireplace, add trim to secure it into place. Add decorative boxes to hide items such as toys or use as a bookshelf. When you want the fireplace back simply remove the box.
How do you cap an unused chimney?
Apply a bead of butyl rubber caulk around three sides of the chimney at the top, and set the cut piece of metal on the chimney so the edges line up with the caulk bead. Press the metal into the caulk. The goal of this metal cap is to prevent rain from coming in, but it shouldn’t be an airtight seal.
Can you use an old fireplace?
Old-house fireplaces that have been decommissioned can be brought back to good working order with some thoughtful repairs. The restored fireplace, with a new insert and two cast-in-place flue liners in the chimney, now safely vents two appliances—hot water heater and boiler—in addition to holding a crackling fire.
What can I replace my fireplace with?
What to Use in Place of a Fireplace Electric Fireplace. Image Source: pxhere.com. LED Fireplace. Image Credit: pixy.org. Gas Insert Fireplace. Image Source: Regency-fire.com. Decorative Mantel. Pellet-Burning Stove. Wood-Burning Stove. Fake Firewood.
What do you cover a fireplace with?
10 ways to cover a brick fireplace Paint it. A coat of paint can work wonders when it comes to revamping your brick fireplace. Stain it. You could opt to stain the bricks of your fireplace instead of painting. Go for a limewash. Cover it in concrete. Stick to stucco. Add a stone veneer. Tile over it. Wow with wood.
Do unused chimneys need ventilation?
Unused chimneys not only waste a lot of heat, they also pose a potential damp problem as well as being a cause of smoking fireplaces and stoves. You should cap any unused chimneys with a flue ventilator. The flue ventilator stops rain entry to the chimney but still allows a small amount of air passage for ventilation.
Should I seal unused chimney?
Plain and simple, DO NOT seal off a chimney or fireplace because you will get a flue full of condensation problems! Even when your fireplace is blocked off airtight you’ll still end up with “hidden” water issues. We promise there are better ways than blocking or sealing a chimney and fireplace.
How do you decommission a wood burning fireplace?
Open the doors of the fireplace insert, if they have been installed. Remove the metal grate used for the wood. Remove soot from the bottom of the insert and place it in a bucket, using a metal scoop. Clean up any remaining debris from the bottom of the fireplace insert with a broom.
Can I pour water on my fireplace?
Water should not be poured on a fireplace because it can cause messy ash, more smoke, and potentially crack the masonry. Depending on the type of wood and the heat of the flame, using water to put out a fire can also cause smoke inhalation and steam burns. Water should only be poured on a fireplace in an emergency.
Can you pour water on a fire in a fireplace?
It is important to note that you should avoid using water as a method to put out a fire. Doing so can cause an outburst of smoke and it can also lead to steam burns. Water should only be used as a way to extinguish a fire in a fireplace in an emergency situation where there is nothing else available.
Can you leave burning embers in a fireplace?
You should never leave a fireplace burning overnight, regardless of the source. Before you go to sleep, be sure to put out the fire and let the materials cool down. Unattended fire is a hazard, and even the slightest gust of wind can reignite it or blow embers to a nearby flammable material.
How do you update a fireplace on a budget?
Learning to DIY: How to Update a Fireplace on a Budget Add a touch of paint. Gone are the days of design elements such as bold and bright red fireplaces and natural, oak-colored wall paneling and trim. Turn your brick to stone. Add a mantel. Think — and build — outside the box. Accessorize, accessorize, accessorize.
How do you Modernise a fireplace?
But if your mantel is looking a little tired there are lots of budget-friendly, practical tips to give it a makeover. Start by giving it a good clean. Brush it up with paint. Embrace the materials. Whitewash it. Tile in style. Fit a floating beam. Replace the mantelpiece. Try a faux fire.
Should you paint your fireplace?
DO trust the pros. There’s a lot involved in painting a fireplace, and it’s perfectly OK if you want to turn the job over to the experts. Their job is to make it easy for you. They’ll know how to prep by removing soot, dirt, and cobwebs from the bricks with a wire brush, then de-grime the bricks and mortar.
