Table of Contents
Guidelines for determining size of Harp Lamp Shade needed Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height. Bottom diameter should not exceed lamp-base height.
How do you know what size harp to buy for a lamp?
To measure lamp harp sizes, take a measuring tape or a ruler. Then, note how many inches it runs from the topmost part of the harp to the socket cap. Generally, the height of the lampshade should not exceed the measurement of the harp plus ½ inch, and should not be smaller than the lamp harp’s height minus ½ inch.
How tall should a lamp harp be?
Cup harps typically measure between 6” and 9”. Remember though – first we select the ideal replacement lampshade for the lamp and then we select the harp size that will cause the lampshade to sit at the correct level on the lamp.
How do I know what size harp to get?
The measurement for harps is from the “base” (that’s the bottom as shown in the photo) to the bottom part of the screw on top. If your lame already has the base attached, you can just use the top part of the harp.
How do I choose the right lamp harp?
The shade should be twice as wide as the lamp base, and one third of the total height of the lamp. So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.
What is a spider lamp shade fitter?
1. Spider Fitter Shades. The spider lamp shade is the most common type of fitter for table and floor lamp shades. Spider fitters sit atop the lamp’s harp (the U-shaped metal part of a lamp that fits around and protects the light bulb). Once placed on top of the harp, spider fitters are secured to the lamp by a finial.
What is the right size lamp for a bedside table?
As a general rule, your bedside table should be one-third of the width of your mattress and, to fit with this scale, your lamp’s widest point should be one-third of the width of your bedside table.
What size is B22 bayonet?
B22 Bayonet Bulbs This is one of the most common bases for ‘Type A light bulbs’ in the U.K. A bayonet fitting bulb has 2 pins that stick out of the side, and has a base diameter of 22 mm.
What size lampshade do I need for a table lamp?
The width of the lampshade (diameter at the bottom) should be roughly equal to the height of the lamp base. The height of the lampshade should be about two thirds the height of the lamp base. The lampshade should be the wider than the widest part of the lamp base.
Are lamp shades universal?
If you are unsure of what shape lamp shade to choose, match the shape of the lamp shade to the shape of either the lamp or the lamp base. A good lamp shade will cover all of a lamp’s hardware. For a balanced look, a table lamp should have a lamp shade that is approximately 2/3 the height of the lamp.
What is the base of a lamp?
On an incandescent light bulb, the component that supplies electrical current is called a “base”. There are several types of foot lamps, and each has a specific application. It is therefore vital to select the light bulb that corresponds to your needs. Indeed, many lamps have their own unique base.
What is an empire style lamp shade?
In general, the empire style is one in which the top diameter of the lampshade is about ½ of the diameter of the bottom of the lampshade; the style exhibits a straight, gentle slope from the top of the lampshade to the bottom of the shade.
What is a lamp shade harp?
Lamp harps are the metal wire lamp part that typically mounts below the lamp socket and supports your lamp shade (see Fig. 1). The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.
How do you measure a lampshade for a lamp?
Measure lamp for shade size Your shade should be about two-thirds the height of your lamp base (give or take an inch). Proportion is the key – too tall and the effect will be top heavy, but too short and your lamp will look out of balance. Just like a slip, you never want your harp to show.
Can a harp be added to any lamp?
You can now easily attach a harp to a lamp without one. The opening on this adapter is 1 9/16 Inches. A plastic washer (ring) is needed to hold the adapter tightly in place. Please note, there are two fitter sizes (1 and 9/16 inch diameter and a smaller 1 and 7/16 inch diameter).
How do you tighten a lamp harp?
A-Take off the shade to expose the socket, then look for a small setscrew in the bottom of the socket`s base. You will notice that this socket base screws onto the top of a small-diameter threaded pipe, so you can tighten it back down by turning the base of the socket clockwise while holding the lamp base steady.
Can you take a harp off a lamp?
If you wish to remove the harp, for adjustment or replacement, first unscrew or otherwise remove the lamp finial above the lampshade, remove the shade, and gently squeeze the harp inward just above the harp base. The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.
