Table of Contents
Surface bonding cement, used to build dry-stack block walls in place of mortar, can be used to create a smooth surface on concrete block. It’s a waterproof, flexible Portland cement reinforced with fiberglass. One of the benefits is that you can add color to the cement, eliminating the need to paint over it.
How do you cover a cinder block wall indoors?
You can hide your concrete blocks altogether by facing the wall with wood paneling. To do this, attach horizontal furring strips to the wall using a hammer drill and screws that are made to drive into concrete.
What can I use to cover a cinder block wall?
Concrete. The simplest way to cover a cinder block wall is by using surface bonding cement to create a concrete finish. Concrete helps insulate the building and keep moisture out. It creates a smooth, finished surface you can leave as is or paint.
Can you wallpaper over cinder block?
A. Just about. Wallpaper will adhere to drywall, new and old plaster, concrete, masonry, and paneling. You can even wallpaper over slick, nonporous surfaces, such as tile, concrete block, or synthetic laminate paneling.
How do you make cinder blocks look good?
Surface bonding cement, used to build dry-stack block walls in place of mortar, can be used to create a smooth surface on concrete block. It’s a waterproof, flexible Portland cement reinforced with fiberglass. One of the benefits is that you can add color to the cement, eliminating the need to paint over it.
How can I make my concrete walls look better?
7 Ideas for Decorating a Concrete Garden Wall Get Creative With Poured Concrete. Add Plants and Metalwork. Mimic the Texture of Rough-Sawn Wood. Hang Vertical Planters. Customize with a Mural. Apply a Textured Overlay. Embed Boulders.
Can you tile over cinder block?
ANSWER – Yes you can install ceramic tile over CMU (concrete masonry unit) blocks. You need to properly prepare it to make sure it is free of any structural cracks, clean, and plumb. You can bond the tile directly to it or you can fasten metal lath and apply a scratch and brown coat of mortar.
Can you plaster over cinder block?
Skim coating can freshen up old concrete blocks and give your home or a wall on your property a new look. The process involves applying a layer of cement over the concrete block wall to cover grout lines or stains and give the surface a smooth appearance.
Can I plaster over concrete walls?
Applying plaster to a concrete wall can change its appearance, level it, make it more moisture-resistant and give you the opportunity to add texture. Plastering a concrete wall takes time. You will have to prepare the wall and allow for curing and drying time between applications of plaster.
Can I glue drywall to cinder block?
You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. This process is much less time-consuming than attaching wood furring strips to the concrete block to which the drywall can be screwed.
Can you use drywall mud on cinder block walls?
When applying drywall mud over concrete or cinder block, you need to do it in several thin layers. Each layer should be approximately 2-3 mm in thickness. It can take anywhere from 4-8 of these layers to thoroughly coat your concrete walls.
Can you put drywall over concrete walls?
You can put drywall over concrete, but it is important to be mindful of the process. Drywall should never be installed directly to a concrete slab, and should be installed over a barrier wall to prevent any type of moisture transfer, which could create mold and damage the drywall.
How do you cover a cinder block basement wall?
If your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.
Does peel and stick wallpaper work on concrete walls?
While removable wallpaper and wall murals work on most surfaces, there are a few types of walls that are not best for them. Wall murals are not recommended on any textured surfaces like brick, concrete, cloth, or textured walls.
Can you put wallpaper over brick wall?
Can I hang wallpaper over old paneling,brick, textured walls, etc.? Absolutely. Once hung, this will “bridge” the grooves in paneling or other unusual surface allowing for the ultimate application of wallpaper or it can even be painted.
How do you make cinder blocks look like stones?
Using a 3″ wide flat paint brush, each block is painted a different mix of the four colors. Brown & gray, tan & cream, gray & cream, tan & brown…etc. As you paint, your paintbrush will become mottled with different variations of the colors you’re using. This just adds to the variety of the “stone” you’re creating.
How do you make a cinder block retaining wall look good?
Stucco – Apply a layer of stucco to exterior concrete walls, such as retaining walls, to produce a textured look. If desired, add a “cover” to the top of the wall by using the appropriate adhesive to adhere small slabs of smooth, natural stone to the wall top.
How do you decorate interior concrete walls?
Use a color that matches the accessories and furniture of your interior. If you only have one concrete wall in the room, consider using it as an accent wall. Paint it orange, turquoise or another vibrant color. If you’d rather have a monotone affect, use varying shades of the same color.
