Table of Contents
Your Motion Sensors use infrared (heat) sensing technology to detect when someone has entered the room. They can detect motion within 30 feet, and have a 90 degree field of view. Simply slide the Motion Sensor off it’s bracket, and you will expose a small black switch. Slide it towards the “L” to lower the sensitivity.
Do SimpliSafe motion sensors have cameras?
The SimpliSafe security system has three states—Off, Home, and Away. Home and Away both mean the system is armed, but different sensors are active in each.OFF MODE. Entry Sensor Off (will still chime when opened) Extra Siren Off Camera (motion detection) Off (privacy shutter still opens for alarm trigger events).
How do I know if my SimpliSafe motion sensor is working?
Motion Sensors: Press the Test Button on the top of the Motion Sensor. For an accurate test, leave the room for the sensor you are testing then wait 15 seconds. Re-enter the room and the Base Station will say “Motion Sensor”.
How far away does SimpliSafe camera detect motion?
Your camera’s motion detection range is 90 degrees left to right and downward, as well as straight out. This range cannot be changed. There is also a notification “quiet period” set up by default. This means you should only be receiving one push notification every one minute, per location.
Do SimpliSafe cameras record all the time?
Do SimpliSafe’s cameras record all the time? No, neither of SimpliSafe’s cameras record all the time. SimpliSafe doesn’t currently offer 24/7 continuous recording for either the SimpliCam or the Video Doorbell Pro.
Why does my SimpliSafe Motion Sensor keep going off?
Direct sunlight hitting the sensor can trigger a false alarm. Heating vents located in the room. If they are located within the sensor’s field of vision, they may cause false alarms. Pets that are able to get too close to the sensor.
What is the range of SimpliSafe motion sensors?
They can detect motion within 30 feet, and have a 90 degree field of view. The best place for a Motion Sensor is in a central room, or hallway in your home. The ideal location for a Motion Sensor is in the corner of a room, and 4-5 feet off of the ground for maximum coverage.
How do I increase the range of SimpliSafe sensors?
Boosting Signal Range of SimpliSafe Door/Window Sensors Step 1: Open Up the Sensor Case. Step 2: Drill Wire Hole in the Top of the Case. Step 3: Solder the Electrical Wire to the Internal Antenna. Step 4: Trim the Antenna to One Meter. Step 5: Reattach the Sensor to the Door/Window. Step 6: Check Your Keypad!.
Can I put SimpliSafe motion sensor outside?
Mount one of these sensors outside and it will let you know if someone is walking, biking, driving, or riding a dinosaur up toward your house. Though mainly used for driveways, these alerts are also good for watching over other outdoor structures, such as stables, pools, or sheds.
How high up should you put a motion sensor?
Overall, a motion detector should be mounted on the wall, between 6 and 8 feet high. Some people also put their motion detectors on or near the ceiling.
Will a cat set off a SimpliSafe motion sensor?
SimpliSafe’s Motion Sensors have been designed to avoid false alarms. Pets under 30 pounds generally don’t trigger Motion Sensors, but if they get close enough to the sensor, smaller dogs or cats may still be able to trigger it.
Where is the best place to put a motion sensor?
The best placement for a motion sensor is in a corner of the room that has a good viewpoint of your entryways and easily detect any changes in the room.
Are SimpliSafe cameras night vision?
SimpliSafe has finally added an outdoor camera to one of our favorite build-it-yourself home security systems. The IP65 ruggedized camera offers a 1080p resolution with HDR, 140-degree field of view, and color “night vision” at a distance up to 10 feet thanks to that LED spotlight.
What does the red light on SimpliSafe camera mean?
The camera has incorrect WiFi credentials If the camera has a flashing red light, it has incorrect WiFi credentials. If this issue arises during setup, ensure that you have entered your WiFi network and password correctly. If the camera has previously been set up successfully, the WiFi credentials may have changed.
Where should I put my SimpliSafe camera?
If you’re lucky enough to have a garage to store valuables and vehicles in, as well as making sure it’s secure and locked, you should place security cameras inside and outside of them. Outside cameras are used to deter opportunistic thieves and inside ones can capture them and what they take if they manage to get in.
What triggers SimpliSafe camera?
SimpliCam and SimpliSafe Integration: If any sensor is tripped, the camera will start recording for 5 minutes. This will also trigger a notification to your phone, allowing you easy access to the footage or, if the event is still happening, the live view.
How do you know if a security camera is recording?
The Ways on How to Know if CCTV Camera Is On In a pan tilt-type security camera, it continuously rotates when it’s on. A distinct buzz may also be heard, and that means it is rotating. If the patrol or tour function is set up, it constantly moves, which means the camera is recording.
Can you hack into SimpliSafe?
Vulnerability of Security Systems to Hacking Specifically, ADT, SimpliSafe and Ring Alarm have all experienced hackings to varying degrees, and although each company has taken steps to address these attacks, we still want our readers to be informed about their complicated history. To learn more, read our ADT review.
Can a mouse set off a motion detector?
Mice or rats generally aren’t big enough to trigger a false motion, and she had no cats or dogs in her shop. Sometimes I’ve seen cases were oscillating fans will trigger the alarms, but there weren’t any of them in her building.
Can motion detectors go off for no reason?
Several factors can accidentally set off your motion sensors, including pets and any other activity from heat sources like vents, windows, stoves, or anything that causes a heat change near your sensor. If you’re still receiving false alarms during this time, it’s safe to assume that the sensor is malfunctioning.
Will a ceiling fan set off a motion detector?
It might trigger the motion detectors. Just try to face the motion detectors away from your ceiling fans.
