Table of Contents
Power ON – Press the power button located on the bottom of the Ember Mug or Ember Mug². You will see the LED illuminate a white light. Power OFF – Press and hold the power button for 3 seconds until the LED dims to an OFF state. *Note: To make sure the mug is OFF you can pick it up to see if the white light shows up.
Do you have to turn off Ember Mug?
The Ember Mug is pretty smart and generally speaking you don’t actually NEED to turn it off. When it doesn’t have any liquid in it and you’re not using it then it’ll go into a sleep mode where hardly any power is used. When you pick up your cup it’ll detect the motion and turn itself back on.
Does Ember Mug automatically turn on?
Ember also took the auto sleep and wake features that it introduced with the original Ember ceramic Mug and brought them to the Travel Mug 2, meaning that it’ll turn itself on and off automatically depending on whether it detects liquid inside, or motion from being picked up, to extend battery life even further.
Is it OK to leave Ember Mug on the charger?
The Ember is 100% safe to keep on the charger when you are not using it. When the battery is fully charged the charging is shut off automatically so no battery damage will occur.
Can Ember Mug heat cold water?
Ember Mug is designed to keep drinks hot and that includes water. It can heat water but it takes a long time and drains a lot of battery. Extremely cold water won’t work in the Ember Mug. This is because the Ember Mug will only recognise liquid above 100ºF (38ºC) and if it’s below this temperature it won’t turn on.
How do I turn off Ember Travel Mug 2?
To power OFF your Ember, press and hold the Ember logo for 3 seconds until the display shows “OFF?” then tap the logo to confirm. The display will show “GOOD BYE” informing you that your Ember Travel Mug has successfully powered OFF.
Why does my Ember Mug say heater off?
The Ember can read as empty or stop heating for a few reasons: The Ember is searching for a drastic temperature change, and when cooler liquids are poured in, it may be unable to detect the liquid and will detect as empty as a result.
Does Ember work while charging?
If you are keeping your beverage hot while using the coaster, it can maintain your perfect temperature all day!* When Ember is on the charging coaster the battery will stay at a constant level and will not charge any higher until your Ember is empty or is powered off.
What does red light on Ember Mug mean?
SOLID RED – Ember has low battery and will be unable to maintain the set temperature. PULSING WHITE – Once hot liquids are poured in the Ember, the Ember will pulse white as it works to reach your set temperature. SOLID WHITE – Target temperature has been reached and the beverage is ready to be enjoyed!.
How long does it take the Ember Mug to charge?
Charge Time: Once your Ember Mug has an empty battery, place the mug on the charging coaster for approximately 2 hours for a full charge.
Does ember charging coaster need to be plugged in?
Hi Ashley, thanks for reaching out! The charging coaster would need to be plugged in, in order to charge your empty Ember Mug or maintain the set temp if liquid is inside.
How long does an Ember Mug stay warm?
Our smart mug allows you to set an exact drinking temperature, so your coffee is never too hot, or too cold. Ember then maintains your chosen temperature for up to 1.5 hours with the Ember Mug² 10 oz and up to 80 minutes with the Ember Mug² 14 oz – so your hot beverage stays perfect.
Can you reheat Ember mugs?
The mug was built with the intention of pouring in freshly brewed coffee, hot tea, or hot liquids in general. This is how we always recommend using your Ember mug. With that said, it is possible to heat from a cold temperature, or room temperature.
Are Ember mugs microwavable?
Do not microwave the Ember Mug! The Ember Mug is an electronic device, which should never go in a microwave. Doing so will result in permanent damage to your Ember Mug or Ember Mug².
How do I change the battery in my Ember Mug?
Ember Mug Battery Replacement: Can It Be Done? You cannot buy Ember Mug battery replacements and the base of the mug is molded closed and the battery cannot be accessed without destroying the mug. No, Ember does NOT offer replacement batteries for sale for their mugs.
How does Ember know its empty?
Why Does Your Ember Mug Say Empty? EMPTY: Displayed when the thermal sensors are not recognizing a change in temperature present in the inner vessel. This notification may also show if liquid is not present or the temperature rapidly decreases (caused by adding cold creamer).
How does Ember Mug know its empty?
The Ember Mug has four temperature and liquid detection sensors built directly into it. This allows the mug to automatically turn itself off when it senses that it’s empty, preserving whatever batter it has remaining. It can also automatically turn itself on the moment a liquid is added.
Is Ember Mug washable?
No it is not dishwasher safe. It is recommended that you hand wash it. Hand wash your mug with warm, soapy water and a soft sponge. After washing, dry your mug off completely before placing on the charger.
