QA

What Sizes Do Bathtubs Come In

The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long.

What is the smallest bathtub size?

The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children’s bathrooms or even for adults of average height.

What is a standard bath size?

As it is commonly accepted that the standard bath width is 700mm, a wide bath is considered to be any bath with a diameter of 800mm and above. Large baths with dimensions over 1800mm in length and over 800mm wide tend to be freestanding baths.

How big is a 2 person soaking tub?

A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.

Are there bathtubs shorter than 60?

A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. Lightweight and easy to clean, this 54 inch model is an affordable tub when you have tight budget and space requirements.

What is a soaking tub?

A soaking tub is a freestanding bathtub that is typically oval in shape with enough water depth to allow for total submersion. As a result, these bathtubs provide a more therapeutic and almost medicinal soak, relaxing your muscles quite similar to a hot tub or jacuzzi as the entire body is fully submerged.

Are small baths any good?

Small baths allow you to relax and unwind at the end of a long day without compromising too much on floor space. A big selling point for small baths that is often not taken into consideration, is that they also save space in larger bathrooms.

Is a 1500mm bath big enough?

A small bath size is: 1400mm-1500mm in length and 700mm wide. A large bath size is: 1800mm in length and around 800mm wide.

What is the inside width of a standard bathtub?

For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

Is a 72 inch tub big?

As a general rule, extra-large alcove tubs are around 72 inches long, 36 inches wide, and 20 inches tall at the outside measurements, providing plenty of room for just about anyone who really enjoys relaxing in the tub. Remodeling your bathroom?Jan 12, 2022.

How do you measure for a new bathtub?

To measure your tub, Victoria Plum suggests starting with the length, which is found by beginning at the farthest edge of your tub and going to the other extremity. Make sure your measuring tape reaches the outer edges of your tub and not just the inner curve of the tub.

How big is a bathtub in gallons?

When filled to capacity (just below the overflow), a standard bathtub holds 42 gallons, but some of that water will be displaced when you get into the tub. So, the tub is rarely filled to capacity before taking a bath. A low-flow showerhead uses about two gallons a minute, or 20 gallons for a 10-minute shower.

What is the best height for a bathtub?

Shorter ones are great for tub/showers since you are not climbing over a tall rim on a daily basis. When used as a tub/shower we suggest to keep the height around 20″. There is a difference between bathtub height and water height. The bath height is from the bathroom floor to the top of the tub rim – step over height.

What type of bathtub is best?

What Is the Best Kind of Bathtub to Get? Porcelain enameled cast iron (Cast Iron) – Best All Around; See Kohler Cast Iron Bathtubs. Thermoformed acrylic (Acrylic) – Better to Excellent; See Kohler Acrylic Bathtubs and Aquatic Bathtubs.

How do I know what kind of bathtub I have?

What Bathtub Material is in my Bathroom Step 1 – Press on the Side of the Bathtub. If you press on the side of your bathtub and it has a little give, chances are it is made of acrylic of fiberglass. Step 2 – Inspect Surface Damage. Step 3 – Hold a Magnet to the Tub. Step 4 – Look for Extra Supports.

What’s the difference between a bathtub and soaking tub?

Deeper than the average bathtub, soaking tubs are designed to offer the ultimate in relaxation by allowing you to fully submerge. Soaking tubs average 23 inches in height, while a standard tub typically comes in at under 19 inches.

What is the most comfortable bath shape?

The most comfortable bath shape is oval since it has the right bathtub lumbar angle and features rounded ends for comfort. Oval tubs also look very beautiful since they combine the best bits of round and rectangular tubs.

What is the best depth for a soaking tub?

So how deep should a soaking tub be? Keeping in mind the water depth measurement, aim for a minimum of 14 to 15 inches of water depth. This level should be deep enough to cover most of a person’s frame. Some tubs, like Japanese soaking tubs, offer water depths of more than 22 inches deep.