Table of Contents
How to Troubleshoot a Touch Lamp Inspect your touch lamp’s lamp cord for damage. Unplug the touch lamp from the outlet. Plug the touch lamp into a working outlet. Check the bulb for a damaged filament. Unplug the touch lamp and remove the light bulb if it still doesn’t work. Remove the light bulb and unplug the lamp.
How do you fix a touch sensitive lamp?
You can do it by following these steps. Troubleshoot the problem. Unplug the touch lamp, and pry off the bottom with a butter knife. Replace the touch sensor located at the base of the lamp. Check any fuses inside the lamp. Install a new power control transistor, called a thyristor or TRIAC.
Do touch lamps wear out?
Touch lamps make turning the lights on and off a luxurious convenience. Eventually, you may run into a problem with your touch lamp. If it’s not turning on, it could be an electric problem, a damaged cord, a burnt out bulb or a worn out sensor. Touch lamp sensors do wear out after a period of use.
How do I reset my touch light?
How to Reset a Touch Lamp Remove the finial holding the shade onto your touch lamp. Move the touch lamp to a work surface. Look inside the lamp for the touch-control box. Wrap a piece of tape around the lamp wire that connects to the black wire from the touch control.
What activates a touch lamp?
A touch-sensitive lamp is one that is activated by human touch rather than a flip, push-button, or other mechanical switch. These lamps are popular as desk and nightstand lamps. They act on the principle of body capacitance. These lamps contain an oscillator that changes frequency when the metallic plate is touched.
Can a touch lamp be fixed?
Three-way touch lamps are a fun and convenient alternative to traditional switch lamps. Sometimes, the mechanism within touch lamps stops working. Because these lamps usually include a dimmer control switch, the easiest way to fix them is to troubleshoot that piece. It is also possible to use an external dimmer switch.
Why is my 3 way lamp not working?
With a 3-way bulb, if it isn’t working at all, it’s probably dead. If both elements don’t come on there, replace the bulb. If you have a 3-way bulb that works as it should in a good 3-way socket, and only one of the two elements works in a different socket, the problem is with the socket.
Why is my touch lamp flickering?
Touch lamps that use different intensities — low, medium and high — have bulbs that flicker on and off at different speeds. Other causes for flickering of the touch light are power usage from another appliance, a loose bulb or a dusty socket. Unplug the lamp, wait for it to cool and remove the bulb.
Why is my touch lamp turning on by itself?
Touch lamps are just trouble waiting to happen. The control is very sensitive and susceptible to all kinds of misoperations. Any type of RFI, such as cell phones, cordless phones, and computers can cause these things to come on and off. They are also a rich source of RFI in and of themselves.
Why is my touch light not working on my iPhone?
Restart your iPhone Turning your iPhone off and on again may refresh the software and restore the flashlight. Hold the Sleep/Wake button on your iPhone until the “Slide to power off” option appears and shut the phone down, or perform a force restart.
Do touch lamps need special bulbs?
You do not need a special bulb for a touch lamp. You just bought a touch lamp, which you can turn on and off by touching the base of the lamp. You might wonder if your lamp requires a special bulb, but it doesn’t. You can use any standard bulb for your touch lamp.
How does a touch on and off lamp work?
Touch lamps work on the principle of capacitance – the amount of charge something can soak up. In circuits, components called capacitors store varying amounts of charge and are used to tune circuits like radio receivers or smooth out fluctuations in voltage. The lamp detects this and switches on or off accordingly.
How do touch sensitive switches work?
The switch works using body capacitance, a property of the human body that gives it great electrical characteristics. The switch keeps charging and discharging its metal exterior to detect changes in capacitance. When a person touches it, their body increases the capacitance and triggers the switch.
Why do lamps stop working?
Inspect the wiring to be confirm it is secure/not loose. If your lamp does not illuminate, then a faulty bulb, a faulty power outlet, a faulty switch, a faulty light socket, a faulty plug, a faulty brass tab, or a faulty cord may be the issue.
Can lamps be repaired?
With a handful of parts and about a half-hour you can safely fix almost any lamp. In about 30 minutes you can repair the electrical wiring in almost any lamp—and make it safe as well.
What kind of lightbulb goes in a touch lamp?
Lighting consultant Terry McGowan said that if a touch lamp has a mechanical switch, it will work with any CFL or LED bulb. However, if the lamp has an electronic switch, you’ll need to use a CFL or LED bulb that’s specially marked as dimmable. Even then you may have some problems, he said.
