Table of Contents
The standard bath vanity light height is roughly 75 inches to 80 inches from the floor, above the mirror.
How high above a vanity mirror Should you mount a light?
The standard height for vanity lighting above bathroom mirrors is 75” to 80” from the finished floor to the center of the light fixture. Keep in mind that these are just the standard measurements. Use them as a starting point and feel free to adjust them to fit your space and to accommodate the users of the space.
Should vanity lights hang down over mirror?
Vanity mirror lighting should never overhang the mirror. Make sure the fixture isn’t extended past the mirror to avoid down lighting, which will cast shadows on the face. Take advantage of accent lighting to create a warm glow.
What rating does a bathroom light need to be?
When it comes to bathroom lighting, the requisite IP rating is determined by measuring its proximity to a water source or receptacle. Spaces directly above a shower or bath are considered “Zone 1” while those within 60cm of a water source are “Zone 2”; both require a rating of at least IPX4 (so IP44 is acceptable).
How high should mirror be above vanity backsplash?
Framed mirrors should have a couple of inches between the lower edge and the backsplash. You will find that most of the time the mirror will look right between 5-10” above the sink. 5.
How tall should vanity mirror be?
Standard vanity mirror are usually 28-34 in. high. Hang the mirror 5 in. to 10 in. above the sink.
How far should mirror be above vanity light?
In those cases, when a bath bar above the mirror is the only option, vanity lights should not exceed the length of the mirror, preferably around 75 percent of the mirror’s width. Ideally, three inches should sit between the bottom of the light fixture and the top of the mirror.
How much space should be between vanity and mirror?
Standard spacing for a vanity mirror(s) is 5-10 inches from the vanity sink to the bottom of the mirror. That range of spacing allows for height considerations for who the bathroom is intended for so the mirror can be set eye level for the viewer, as well considering the overall size and shape of the mirror itself.
Is LED lighting Good for bathrooms?
Yes, LED lighting is good for bathrooms, especially those lacking in natural light. A professional lighting designer will use a combination of sources to provide general lighting, task lighting and accents to highlight features such as a stone wall or statement bath.
Where is Zone 1 in a bathroom?
Bathroom Zone 1 Zone 1 is the area above the bath or shower tray to a height of 2.25m from the floor. Any fitting used in this zone must have a minimum rating of IPx4* , which means it is protected against water spray from all directions.
What does Zone 1 and 2 mean in bathroom lighting?
Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. Zone 2 is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required.
What are bathroom vanity heights?
Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, that’s the standard counter height for kitchens.
Should a bathroom mirror be centered over the sink?
The mirror should be centered above the basin and measure a couple inches less than the vanity or sink area.
How high should the medicine cabinet be above the vanity?
Standard Height The installation height for medicine cabinets is generally accepted to be 64 inches from the floor to the mirror’s center, according to Broan.
How big should a mirror be over a 36 inch vanity?
What Size Mirror Should I Use Over a 36-Inch Vanity? If your vanity is 36 inches, then your mirror should be at most 32 inches wide, leaving 2 inches of space on either side of your vanity.
Is 5000K too bright for bathroom?
As a rough guideline, bulbs labeled “daylight,” which generally have a color temperature of 5000K to 6500K, or bulbs labeled “cool white” or “bright white,” with a color temperature of 3500K to 4100K are best for the bathroom.
Where should I put LED lights in my bathroom?
LEDstripsas an indirect lighting resource Thus lighting can function as a decorative element. Another very frequent use is to place the LED strips around the perimeter of the bathroom or on the lower perimeter of the bathroom furniture.
How many watts should a bathroom vanity light be?
A useful rule of thumb for bath vanities is to use a minimum of two 60-watt incandescent bulbs, which typically produce approximately 800 lumens each for a total of 1,600 lumens.
What are Zones 2 and 3 in a bathroom?
In addition, it is good practice to consider the area around a wash basin, within a 60cm radius of any tap, to be considered as zone 2. Zone 3 is anywhere outside zones 0, 1, and 2 (subject to specific limits) and where no water jet is likely to be used.
Is IPX4 OK for Zone 1?
The area stretching 0.6m outside the perimeter of the bath to a height of 2.25m. As with Zone 1, the minimum rating for this zone is IPX4.
Where is zone 1 and 2 in a bathroom?
The space under the bath tub or shower basin is considered to be zone 1. However, if the space under the bath or shower basin is only accessible with a tool, it is considered to be outside the zones. Zone 2 for a bathroom is the same height as zone 1 (2.25m) extended to 0.6m around the bath.
