Table of Contents
Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long. Persons over six feet tall may want to consider an oversized bathtub for the most comfort.
What sizes do baths come in?
Standard bath size Standard bath size – 1700mm long x 700mm wide. Small bath – 1400mm long x 700mm wide. Compact bath – 1200mm long x 700mm wide. Large bath – 1800mm long x and upwards.
What is the size of a small bathtub?
A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. The style of tub you choose, along with the depth of the tub, will be the biggest factors to consider as you begin shopping.
Is a 60 inch tub really 60 inches?
In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
Are there different sizes of bathtubs?
While standard bathtub dimensions may vary on type, there are many different types of bathtubs to choose from. The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.
Are all baths a standard size?
Despite there being a standard bath size, you will sometimes find baths or spaces that do not fit with these dimensions. Small baths are generally considered to be around 1500mm or 1600mm in length, however, in most cases, the width generally won’t deviate from the standard 700mm.
How big is a Jacuzzi bathtub?
Whirlpool tubs range in size from a standard tub size of about 30 x 60 inches to a luxurious 80 x 60 inches. Obviously, you should measure the area in your bathroom before you buy a jetted tub, but you also need to think about configuration — the way the tub is oriented in the room.
What is the lowest bathtub height?
The shortest tubs are 14 inches tall, but only have about eight inches of soaking depth. A shallow tub like this is fine for people who mostly shower, bathe children, and don’t want a tall tub to step in to.
How much room do you need for a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
What is a soaking tub?
A soaking tub is a freestanding bathtub that is typically oval in shape with enough water depth to allow for total submersion. As a result, these bathtubs provide a more therapeutic and almost medicinal soak, relaxing your muscles quite similar to a hot tub or jacuzzi as the entire body is fully submerged.
Can I replace a 30 inch tub with 32?
The bigger issue is when the width of the new tub exceeds the old space. Replacing a 30-inch tub with a 32-inch tub is an example. If the floor is concrete, this makes adjusting the flooring more difficult.
Is a 1400 bath too small?
A small bath size is: 1400mm-1500mm in length and 700mm wide. A large bath size is: 1800mm in length and around 800mm wide.
What height should a bath be set at?
The standard bath height is 510mm. Although heights may vary, it is important to remember that the higher the bath is, the harder it is to get in an out. That is particularly important to consider in family homes or homes for older people. Freestanding baths are a great choice if you have enough space to install one.
What is the difference between a soaking tub and a bathtub?
Deeper than the average bathtub, soaking tubs are designed to offer the ultimate in relaxation by allowing you to fully submerge. Some soakers can hold as many as 250 gallons of water, while the average bathtub holds between 25 and 45 gallons.
How much is a standard bathtub?
A standard bathtub/shower combination averages $300 to $2,000 for materials. For a freestanding tub, material costs range from $600 to $20,000, depending on the material the tub is made from.
What is the rough opening for a standard bathtub?
The standard rough-in dimension for a bathtub is 60-¼”. But if there’s a gap, you can attach furring strips to the stud wall. You can also apply some cement or plywood.
What is the smallest bathtub you can buy?
The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children’s bathrooms or even for adults of average height.
What are big bathtubs called?
Corner tubs are large, triangular bathtubs that, as the name says, fit into a corner of the bathroom. Typically expensive, corner bathtubs use a lot of bathroom floor space. One downside of this tub is that they take a long time to fill up. More capacity equals more water volume required.
What size is a 2 person tub?
A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.
How big does a tub have to be for two people?
The double sloped sides are very important, and should be a comfortable recline. Also, it should be longer than a standard 60” tub, 66” or preferably 72” if you have the room. Freedom By Oceania 72x36x23 (73 gallons) (narrower tub) Would be great in a smaller bathroom!Nov 7, 2019.
