QA

Question: How Big A Table To Seat 12

A 60-72” table seats 6. A 80-87” table seats 8. A 92-108” table seats 10. A 120” table seats 12.

How long is a table that seats 12?

You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.

How big is a rectangle table that seats 12?

A 96” – 108” long rectangular table can seat up to 12 adults, depending on table width. A 120” long rectangular table can seat up to 14 adults, depending on table width.

How much room do I need for a 12 person dining table?

Large dining room for 12 You need about 16ft x 17ft 6″ of dining room space to fit in a dining table for 12, a sideboard and a few plants or dumb waiters.

How big does a round table need to be to seat 12?

Round dining table size for 12. With a diameter of 8 feet (244cm) you can comfortably fit 10 people, or squeeze in 12 with slightly less elbow space, while you would need around 9 feet in diameter (274cm) to spaciously sit 12 people.

How long is a 10 seater table?

Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.

Can you fit 6 chairs around a 48 table?

A 48″ round table can seat 4-6 people comfortably.

How big of a table can I fit in a 10×10 room?

There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.

How many does a 90 inch table seat?

Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.

How many does a 72 inch table seat?

Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.

How many can you seat at a 6 foot rectangular table?

How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.

How much space should be between a chair and table?

Most chairs have a seat height between 17” and 20” and most standard dining tables are approx. 30” tall, so try to allow for between 10” and 12” of clearance between your chair seat and your table top. If your table has an apron, try to allow for approx. 7” of space between the seat of your chair and the apron.

How do you pick the right size dining table?

Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3′ clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12′ x 9½’ space, the maximum size for your table would be 72” x 40”.

How big does a round table need to be to seat 10?

What size round table seats 10? A round table that’s 8 feet in diameter can seat 10 to 12 people.

How many does a 6ft round table seat?

Seating Planner Seating Capacity for Tables Table Size Number of People 72 inch Round (6′) Seats 10 – 12 Adults 60 inch Round (5′) Seats 8 – 10 Adults 48 inch Round (4′) Seats 6 – 8 Adults.

How many does a 60 inch table seat?

The 60 inch, or 150 centimeter, round banquet table, seating 8 or 10 people, is possibly the worst invention in the history of the hospitality industry.

How long is a table that seats 20?

So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).

How long is a 10 seater rectangular table?

A standard, rectangular 10-person table measures 96-inches long.

How long is a table that seats 8?

A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.

What size room do I need for a 60 round table?

Use 12 sq ft per person for 60 in round tables with 8 per table or any other round table.

How much room do you need for a 48 inch round table?

As a general rule, you need about 36 inches (3′) of space for a chair. It won’t take up that much space when drawn up to the table, but you need to be able to push the chair back to get up. Hence a 48-inch diameter round table actually needs a space of 10 square feet.

How many chairs fit around a 120cm round table?

120-centimetre diameter with legs seats four. 150-centimetre diameter with a pedestal base seats six. 150-centimetre diameter with legs seats four. 180-centimetre diameter with pedestal base or legs seats eight.