QA

How To Prevent Charger Cable From Breaking

9 Hacks To Protect Your Phone Chargers From Breakage Hack 1: Forget Holding Your Horses, Hold Your Cords Right! Hack 2: Store Your Charger Properly For Longevity. Hack 3: Protect Your Charger With The Right Asset. Hack 4: Get A Cord For A Cord. Hack 5: Get The Best Out Of Waste. Hack 6: Magnetize For A Longer Life.

How do I stop my charger cable from breaking?

The “roadie wrap” is the best way to wrap your charging cables. Avoid excessive bending of cables, or wrapping them up too tightly. Bending the cable, particularly at the point where the cable joins the plug, is the leading cause of damage over time.

How do I protect my charger cable?

Wrap a pen spring around the end of a cable wire to prevent fraying. This will help prevent fraying at the cable’s most delicate point while still keeping it flexible. Use 2 pens springs to reinforce both sensitive ends.

Why does my charger keep breaking?

Pressure and tension is not good for the cable. One of the most common causes of cable breakage is due to it being squashed and heavily bent by tension or pressure. The point where the plug connector meets the cable is the most likely place for it to fray.

How can I strengthen my cable?

You can take your time neatly wrapping the cable to reinforce it, but the best way to prevent any more damage is to wrap the split or fraying part of the cable several times with electrical tape, then work your way out from that spot. This immobilizes any breaks in the cable and helps prevent further damage.

How can I make my charger last longer?

To extend the life of your phone charger, remove the spring from a pen and stretch one end so it can fit around the charger cable. Wrap the spring around the cable, take a heat-shrinking tub, and slip it over the phone charger and spring.

What is a cable protector?

This charger protector is compatible with Android as well as iOS devices and covers the entire charging cable, reducing the risk of fraying and breaking by more than 80%. On top of that, it saves time and money by being easily available at a nominal price.

Why is my phone ruining chargers?

The most likely cause is that the contacts in the cable and the charging port aren’t directly touching – something that happens a lot as cables get older. It’s also not unheard of for the wires inside the cable to break after a while, leaving both ends floating inside their insulation.

How long do charging cords last?

On average, an iPhone charger lasts one year in perfect working condition. After one year or so, the cable part near the port starts fraying. In extreme cases, the cable sheath may expose the conductors inside. And that’s when using that cable becomes dangerous.

How do I clean a charging port?

Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port. Blast a few short bursts and see if any dust falls out. If using compressed air, make sure you’re holding the can upright to avoid getting water inside the port.

Why do charging cables fail?

The most common reason why iPhone cables stop working is primarily because of how old they can be after being used day in and day out. This could lead to certain wear and tear and even cause the cable to short circuit depending on how much it was used.

Is it OK to charge phone while using?

There is no danger in using your phone while it’s charging. This myth comes from fears about batteries overheating. If you want your phone to charge more quickly, put it in airplane mode or turn it off. Also, charging from a wall plug is always faster than using a computer or car charger.

Is cord protector necessary?

Wire protectors will prevent accidents inside your home; nobody will trip on those snaking cables across the room that either lead to injuries or damage to furniture. You would no longer have to go through a lengthy process of sorting your cables out and untangling them to find the one that you need to plug in.

Can you coil your own cable?

Making your own coiled wires is super easy, and will work on almost any type of stranded wire with a vinyl jacket. Turn just any straight wire into a coiled one in under 10 minutes, all you need is a heat gun and a few simple tricks that I’ll share to get the best results.

Can you coil a straight cable?

Introduction: Make Straight Cable Into Coiled / Pigtail Cable. Here is a super-easy way permanently coil a cable such as a USB, Lightning, or similar data / charging cable. For some reason, the coiled cables cost about $12 a piece, but you can by 5 straight ones for $10.

Can iphones ruin chargers?

There’s never any visible physical damage to either end of the cord. The only thing that’s left is the phone itself that could be causing it, but this really doesn’t seem to make sense to me, I’ve never heard of a phone destroying chargers repeatedly.

How often should I buy a new charger?

You don’t have to replace it unless it gets physically damaged. In those rare cases when the charging cord doesn’t have any physical damage that you can see, but there is some internal damage, your phone will let you know. It might not charge when you plug it in for example.

When should I replace my charger?

Here’s are a few signs you need to change your charger: It won’t charge the phone. It charges the phone slowly. Damaged USB port in the charger.

Are thicker charging cables better?

It’s a pretty simple idea. Bigger cables carry more current, and so can transfer more current to your phone in the same amount of time. This means it will charge faster.