Table of Contents
What kind of wood is used for board and batten?
Cedar is a common choice for exterior board and batten siding, but other acceptable wood species include Cyprus, redwood, locust, white oak, and hemlock.
What materials do you need for board and batten?
Here’s what you’ll need: wood/mdf in the width you want for the batten. (if your walls have texture) backer board to make walls smooth. nails. liquid nails. wood filler/sandpaper. paintable caulk.
How thick should battens be?
A true batten is 2-inches in width or smaller, but you can use larger widths by installing trim in place of a batten if you want a thicker appearance. They’re installed directly over the vertical panels to get the traditional look.
How tall should my board and batten be?
It should generally measure either one-third or two-thirds the height of the ceiling. But it should never settle at half the height of a room. Using board and batten can completely alter the face of a home or the style of a room because it adds detail onto an otherwise flat surface.
Does board and batten need to be caulked?
For cement board and batten siding, installation requires the battens to be caulked.
How much does a board and batten wall cost?
Cost of Board and Batten Siding Board and Batten Costs Zip Code Sq. ft. Basic Better Board and Batten – Installation Cost $210.00 – $320.00 $300.00 – $430.00 Board and Batten – Total $710.00 – $880.00 $940.00 – $1160.00 Board and Batten – Total Average Cost per square foot $7.95 $10.50.
How do you do board and batten without removing baseboards?
Use very thin battens or bead board paneling that fits on top of the existing baseboard. The top edge of most baseboards is no more than 1/4″ thick. This option results in a pretty flat wall treatment without a lot of dimension. Keep the existing baseboards and create an optical illusion of sorts.
How do you evenly space board and batten?
Take your total wall length and divide that by the approximate spacing you would like between the battens. That number will be how many spaces you have on your wall. Add 1 to your number of spaces to get the number of battens on the wall.
How wide should interior board and batten be?
Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference. Our wall is 164” wide, so we used 8 batten (for a total of 7 spaces) with a distance of 19.42 inches between each batten.
Is board and batten out of style?
Today, board and batten has been largely removed from it’s practical origins. Exterior board and batten still exists, but the most popular use of this design is interior. Entire walls or ceilings can be covered in board and batten, or it can be used as wainscoting.
What size boards do you use for board and batten?
The most common arrangement uses 1×10 boards and 1×2 or 1×3 batten. You can also use 1×8 or 1×12 boards and 1×4 battens. To seal out moisture, the boards should be in sound condition and free of open knots, and the battens should lap at least 3/4 inch onto the boards on both sides.
How thick should the boards be for board and batten?
Bottom boards: 4-1/2” Top Boards: 3-1/2” Battens: 2-1/2”.
How thick should wood be for board and batten?
How thick should board and batten be? If you’re dealing with a smaller bedroom in a house with 8 ft ceilings, you’ll want to use something in the 2.5” to 3.5” width range for the trim work.
Does board and batten add value?
Having a sound exterior is a crucial investment that should be tended to before cosmetic repairs! Crown moulding, board and batten, plank walls, beadboard, and trim all add character and charm to a home and give it a custom, “high-end” look.
Is wainscotting outdated?
Give your home wall-to-wall character with this timeless feature. But just because wainscoting is no longer required to keep your home warm doesn’t mean it’s lost all its magic. With the right pairing, this once old-school element can feel surprisingly fresh and modern.
Does board and batten make a room look taller?
Use things like board and batten to make a small entryway or bathroom look larger. We had a very small entryway with a dropped ceiling in our last house, but when we installed extra tall board and batten, it made the space feel WAY bigger, and more open!Oct 20, 2016.
Is board and batten hard to install?
Is DIY board and batten hard to install yourself? This is a fairly easy beginner to intermediate project. Board and batten doesn’t require a ton of tools or woodworking experience, which makes it a great project to DIY in your home.
What kind of nailer do I need for board and batten?
Brad nailer (I highly recommend using one of these. The nail holes were tiny, which made the spackling process a lot easier. The one we used is the Dewalt 18-Gauge Brad Nailer from Home Depot.) Paint (We used Shoelace by Behr in an eggshell finish.
