Table of Contents
What household items can you use to clean vinyl records?
Here’s what you’ll need: Warm water. Some people say you should use hot water, but there’s no real benefit to that. Dish soap (or record cleaning solution) Dish soap is the cheapest option, but it will leave a bit of residue on your records. Carbon Fiber Brush. Soft, Lint-Free Cloth.
What’s the best way to clean vinyl records?
How to Clean Vinyl Records Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl. Rinse. Apply Simple Green solution. Damp-wipe clean. Dry. Spin and store properly.
Can you clean vinyl records with soap and water?
Absolutely you can clean vinyl records with water. It would also help to rinse or use a standard record brush with a solution on the groove surface prior to cleaning with soapy water in order to remove the larger dirt, dust, and other contaminants on the surface that could scratch during the cleaning process.
Can you clean vinyl records with Windex?
You can now proceed to use Windex. Remember, as it’s harsher than just water and soap, so only spray a little on the records. A few sprays will do as you’re going to spread the solution by using your microfiber cloth anyway. Wipe the records gently until the Windex dries up and polishes the records.
How do you remove dust from a record?
Use a Record Cleaner The cleaner is usually enzyme or water based, but any specialized cleaning product for vinyl records will help with the process. Put the cleaner on a soft cloth and gently clean in concentric circular motions. The cleaner will remove dust and dirt from your record.
Can I use alcohol to clean vinyl records?
Wash The Record In particular, we recommend avoiding any that contain isopropyl alcohol. While it will clean the muck off your record, many people report that over time it’ll also damage the protective coating on your vinyl. If you are going to use a solution with isopropyl alcohol – use is sparingly.
Can you clean vinyl records with vinegar?
Sum everything up, the best way to clean the record is cleaning vinyl records with vinegar. It is very good for cleaning. I use white vinegar and distilled water 50-50 for many years, it gives an excellent result. I highly recommend this to all vinyl lovers.
Can you use wd40 on vinyl records?
WD-40 is a great vinyl record cleaning product. It does not contain any ammonia or alcohol, and it is a volatile solvent. After use, it will remove the dirt or dust, evaporate and leave behind a non-volatile lubricant. All you require is a lint-free cloth, the WD-40, and time.
Can you use glasses cleaner on records?
By all means laugh and deride but I have found Spectacle Lens cleaner (Specsavers Lens Bright) does an excellent job of wetting the disc surface and removing any trace of surface dirt. Judging from the playing after it also digs into those grooves too.
How do you get fingerprints off vinyl?
Follow these guidelines on how to clean vinyl records and you won’t have to worry about dust or fingerprints. Remove dust and static with a record brush. Inspect the record for visible blemishes. Spray cleaning solution on problem areas. Wipe clean using circular movements. Store vinyl records properly.
How do you make your own vinyl record cleaner?
The exact mixture is one part isopropyl alcohol, one part distilled water, and one to two drops of dishwashing soap. This combination of fluids is widely recommended as an efficient mixture to clean records using what are household materials. The three ingredients were easy to measure and easy to mix.
Can scratches be removed from vinyl records?
Apply a thin line of epoxy or wood glue to the scratched area. If there are multiple scratches, apply glue to the entire record as it spins on your turntable. Place the tip of the glue bottle to the inner label of the record and lightly apply pressure. Stop once you’ve reached the outer edge of the record.
Can you clean a vinyl record with a paper towel?
*For records that are really coated-with-grime dirty, soak a paper towel in your soap/water solution and rub the surface of the record well before starting with the brush cleaning. You can clean a LOT of records with that much solution. When you’re done with your cleaning session, toss the leftover solution.
Why are my records so dusty?
Why do records get so dirty & dusty? Records get dusty and dirty because of static electricity, which builds up on the record surface, attracting dust and other dirty into the grooves. Static electricity can stay on a record even if you are not playing it.
What causes skips in vinyl records?
A common reason your records may skip is dust and dirt that gets into the grooves. While it may occur on old records due to storage, paper sleeves or dust in the environment, new records may also have dust or dirt. You want to remove any dust or dirt from the record before playing it to prevent skipping.
Will vinegar damage vinyl records?
It contains only acetic acid (about 5%) and water, with no additions that can be harmful to vinyl records. Dilute it with distilled water in the proportion of 50 / 50. Apply vinegar on the microfiber cloth, not on the disk surface. Wipe it with the cloth thoroughly.
