Table of Contents
What kind of paint do you use on shutters?
Latex paints work best with vinyl shutters. Oil paints won’t bond well to the shutter’s surface and easily peel or crack when the plastic shrinks or expands with the seasons. Spray paints are a great choice for vinyl too, as long as you use formulas like Krylon Fusion that are made to bond with plastic.
What is the easiest way to paint shutters?
By far, the easiest and quickest way to paint shutters is to use spray paint. Choose the type of paint carefully, taking into consideration the material of the shutters. Remove the shutters and take them outdoors to a shaded area before prepping them with a primer paint or a slight sandpaper scuffing.
Can you paint shutters without removing them?
Can you paint shutters without taking them down? Yes, you can if you are careful and properly mask off the surrounding areas with painters tape and plastic. Or if you prefer to paint your shutters with a brush.
Do you need to prime shutters before painting?
If the shutters have been around a while, you’ll need to clean them before painting. While not required, priming the shutters with a latex primer before painting with acrylic latex paint can increase adhesion and allow better coverage by the top coat.
What paint finish is best for shutters?
Soft Gloss paints are characteristic of exterior coatings offering protection against UV rays. These paints are typically used for exterior doors, trim and shutters. Semi-gloss paints have a higher shine level than flat, eggshell and satin paints.
Can I paint shutters with a brush?
The best way to paint shutters, both interior and exterior types, is to spray them, using either canned spray paint or an airless power sprayer. But, because that’s not always possible, you can still get a quality finish on old shutters by using a brush. Paint the louvers first with a 1/2- or 1-inch trim brush.
Do you have to sand vinyl shutters before painting?
Dry the shutters for the paint to adhere properly to the vinyl surface. Scuff sanding is important before priming or painting. You will also need a primer is the vinyl surface has faded and deteriorated to a point where this damage is visible.
Can I paint shutters myself?
Paint Shutters Without Removing Them Or you can paint them without taking them down. In fact, some shutters can’t be removed. In this case or if you just want to save yourself some time, you can paint them with a brush.
Should shutters be flat or gloss?
When to use a semi-gloss finish: A semi-gloss finish is best for painting garage doors, front doors, exterior trim, gutters, shutters, metal lamp posts, railings, and window sills.
What kind of paint do you use on metal shutters?
A semi-gloss paint or enamel is a good choice for shutters and house trim because the glossy surface helps shed water. Some aluminum shutters feature panels, but many of them have louver detailing that mimics the look of operable shutters. Spraying on the paint will give you the best results.
What color should exterior shutters be?
Black or dark colors, like cobalt, can really make the shutters pop and dress up your home’s exterior. Light-colored shutters that are only a few shades darker than the rest of your home create a seamless, classic look for a more traditional home.
Do you paint both sides of shutters?
You can paint your shutters while they’re attached to the house if you mask off the adjoining wall and window, but it’s best to remove them so they can be properly cleaned, sanded and painted on all sides. Mark each shutter as soon as it is removed so that it can be replaced in the same spot.
Can I spray paint vinyl shutters?
Spray painting vinyl shutters takes less than ten minutes, plus dry time in between coats. Not only does spraying save time, but the paint finish looks so much better. The best way to spray them is horizontally with a drop cloth underneath to protect grass from over-spray.
How much does it cost to have your shutters painted?
The average cost per shutter is between $40 and $70, with most homeowners paying approximately $60 per shutter to clean, prime, and paint louvered vinyl or wood shutters.Cost to Paint Interior Shutters by Material. Shutter Material Average Cost (Materials + Labor) Composite $30 – $60 Vinyl $40 – $70 Wood $70 – $100.
How many shutters will a can of spray paint cover?
With a spray nozzle on my hose, a plastic bristle brush and some Dawn I scrubbed and rinsed the shutters well and then I set them in the sun to dry and sit overnight. The next day I wiped them with a tack cloth and busted out my spray paint. 12 shutters took about 8 cans of spray paint.
Should shutters be painted flat or satin?
A satin finish can also be used for trim or shutters if you are looking for a less glossy look, but the ability to withstand frequent cleaning. Unlike lower-gloss sheens, Semi-Gloss and glossy sheens create a smooth, bright, reflective finish. They are both durable and can withstand repeated cleanings.
Should shutters be painted with flat paint?
The choice of sheen – flat, eggshell, satin, semi-gloss or gloss is of personal taste. All of them should perform nearly equally as well as the other with only slight differences. Flat paints possibly will adhere better and show less glare but may fade quicker and not wash clean as well.
