Table of Contents
The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.
What is the standard size of bathtub?
The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long.
Is a 60 inch tub really 60 inches?
In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
How big is a standard tub and shower?
Shower and Bathtub Combinations The standard bathtub dimensions are 32 inches wide and 60 inches long, so most bathroom and shower combos are 60 inches by 36 inches by 72 inches or 60 inches by 30 inches by 72 inches.
Are all baths a standard size?
Despite there being a standard bath size, you will sometimes find baths or spaces that do not fit with these dimensions. Small baths are generally considered to be around 1500mm or 1600mm in length, however, in most cases, the width generally won’t deviate from the standard 700mm.
What is the size of a small bathtub?
A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. The style of tub you choose, along with the depth of the tub, will be the biggest factors to consider as you begin shopping.
How much is a standard bathtub?
A standard bathtub/shower combination averages $300 to $2,000 for materials. For a freestanding tub, material costs range from $600 to $20,000, depending on the material the tub is made from.
What is the lowest bathtub height?
The shortest tubs are 14 inches tall, but only have about eight inches of soaking depth. A shallow tub like this is fine for people who mostly shower, bathe children, and don’t want a tall tub to step in to.
How much room do you need for a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
What is a decent size shower?
While you can see standard shower sizes as small as 32″ x 32″, most people would feel comfortable in a 48″ x 36″ size shower. If your home has a little more space available, a very common recommendation is to have a shower with minimum dimensions of 60” x 36”.
What is a standard size shower?
The standard shower size is 36 x 36 inches to comply with ADA accessibility requirements. You won’t find showers much smaller than that, since the International Residential Code sets the minimum shower size at 30 x 30 inches. This smallest size is often reserved for maximizing space in small bathrooms.
What is the standard size of a walk in shower?
60″ x 30″ Common Dimensions Average walk-in shower size for larger bathrooms 60″ x 42″.
How big is a Jacuzzi bathtub?
Whirlpool tubs range in size from a standard tub size of about 30 x 60 inches to a luxurious 80 x 60 inches. Obviously, you should measure the area in your bathroom before you buy a jetted tub, but you also need to think about configuration — the way the tub is oriented in the room.
Is a 1500mm bath big enough?
A small bath size is: 1400mm-1500mm in length and 700mm wide. A large bath size is: 1800mm in length and around 800mm wide.
Can you replace a regular tub with a soaking tub?
How Small Can You Go? According to the National Kitchen & Bath Association, a standard bathtub is a minimum of 60 inches long and 30 to 32 inches wide. Unfortunately, any tub less than 32 inches is usually very shallow as well, making it unsuitable for a deep and relaxing soak.
How much does it cost to remove and replace a bathtub?
Cost to Remove and Install a Bathtub Task Average Cost Range Remove Tub $50 – $100 Dispose Old Materials $100 – 4200 Fix & Prepare Surface $300 – $800 Bathtub $200 – $14,000.
When should I replace my bathtub?
Signs That It’s Time to Replace Your Bathtub Leaks. This is the biggest and most urgent sign that your current tub needs to go. Cracks. A cracking tub can be the culprit of many issues. Stains. Another unattractive characteristic is stains on your bathtub. Mold & Mildew. Difficulty Using It.
Can I replace a 30 inch tub with 32?
The bigger issue is when the width of the new tub exceeds the old space. Replacing a 30-inch tub with a 32-inch tub is an example. If the floor is concrete, this makes adjusting the flooring more difficult.
What height should a bath be set at?
The standard bath height is 510mm. Although heights may vary, it is important to remember that the higher the bath is, the harder it is to get in an out. That is particularly important to consider in family homes or homes for older people. Freestanding baths are a great choice if you have enough space to install one.
What size is a 2 person tub?
A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.
