Table of Contents
The most common sizes for a kitchen sink are 30″ or 33″, however a standard size could measure anywhere between 24″ and 36″ in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30″ will contain one large single bowl.
How big should a kitchen sink be?
Experts recommend at least 22 to 27-inches in length, which also works for small kitchens. Length is one factor, but you also have to consider the depth of the sink. Kitchen sinks should be at least 7 to 7.25 inches deep; anything less and your dishes will quickly pile up and reach the faucet.
How big is an average bathroom sink?
Sink Size and Shape Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
What is the largest kitchen sink size?
Kitchen sinks range from a diminutive 7″ to an enormous 72″ in width; standard sink size is 22″x30″. Single-bowl sinks are available in widths up to 36″ (while larger widths are available, they’re uncommon and generally include extra-wide rims or attached worktop surfaces).
Is a 10 inch sink too deep?
While 10 inches has its benefits, members with relatively shorter heights may experience discomfort. Beyond this, it will be too deep for sinks unless you do not experience back strains or the kitchen has a significantly low platform.
How big is a double kitchen sink?
A double bowl sink has a standard width of 22 inches. Double bowl kitchen sinks can be as wide as 48 inches. The sink can have one basin that is several inches wider than the other basin, or it can have bowls that are equal in size.
How big is a small bathroom sink?
Small bathroom sinks or washbasins are any sinks measuring between 15 inches to 20 inches. But there are also petite sinks that are under 15 inches long.
What size is a small bathroom sink?
Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep. Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep.
How do I measure a bathroom sink?
Measure width from side to side and length from front to back–where you measure will depend on the installation type. Be sure to refer to the specification sheet for exact dimensions. Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom.
How wide is a utility sink?
They average around 23 inches in width, 20 inches in length, and 13 inches in depth.
What size sink goes in a 36 inch cabinet?
A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you’re replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout.
What sizes do farmhouse sinks come in?
Farmhouse sinks measure anywhere between 20 inches to 60 inches in length with an average height of 9-10 inches.
How do you measure the depth of a kitchen sink?
Depth Place a straight-edge across the top of the old sink. Insert a ruler into the sink, and position its bottom end beside the drain. Measure from the bottom of the sink to the straight-edge to get the depth of the sink.
How deep is too deep for a kitchen sink?
Sinks that are deeper than 9 inches can be too deep for some people, however. An added inch or two can make it more difficult to reach into the sink, possibly straining one’s arms and back.
Can you replace a kitchen sink with a deeper sink?
You can choose a new sink with a deeper basin than the existing sink has, but if it hangs down too low, it won’t drain properly and you’ll have to lower the sanitary tee connection in the drain line inside the wall. If the disposer drainpipe will be too low, consider a sink with different depth bowls.
Are all double kitchen sinks the same size?
Double bowl sinks vary in width depending on the chosen sizes of the individual bowls. According to Overstock, they can range up to 48 inches in width, compared to the single bowl sink’s 23 inches. They can sometimes have two bowls of the same size or have one larger and one smaller bowl.
What is the minimum size sink?
Buttrick recommends a sink that is at least 27 inches long, 19 inches wide, and 7.25 inches deep. “Once you factor in the three-quarter-inch counter depth, the sink is eight inches deep,” he says.
What size are bathroom sink drains?
While a bathroom sink’s design and overall size may vary from one model to the next, the drain holes are fairly standard, 1.25 inches being a general standard, with widths of 1.5 inches and 1.625 inches also common. The size of the hole helps determine which size drain is needed for that particular sink.
What is the smallest vanity sink?
At 18″ wide by 10″ deep, this tiny wall-mount is one of the smallest sinks out there. Duravit Vero Wall-Mounted Handrinse Basin, $360.75 from eFaucets. This sink has an attractive, modern look, and the attached towel bar is a nice touch. Cento Ceramic Wall mount Bathroom Sink, $459.99 from Wayfair.
