Table of Contents
The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.
What is the size of a small bathtub?
A small bathtub typically measures less than 60 inches, but can still deliver plenty of room for sudsy fun or soothing soak sessions. The style of tub you choose, along with the depth of the tub, will be the biggest factors to consider as you begin shopping.
What is the rough opening for a standard bathtub?
The standard rough-in dimension for a bathtub is 60-¼”. But if there’s a gap, you can attach furring strips to the stud wall. You can also apply some cement or plywood.
Are all baths a standard size?
Despite there being a standard bath size, you will sometimes find baths or spaces that do not fit with these dimensions. Small baths are generally considered to be around 1500mm or 1600mm in length, however, in most cases, the width generally won’t deviate from the standard 700mm.
Are there different sizes of bathtubs?
While standard bathtub dimensions may vary on type, there are many different types of bathtubs to choose from. The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.
What is the inside width of a standard bathtub?
For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
How do you measure a bathtub?
When measuring height, measure from the floor outside of the tub to the top of the tub fixture. Do not stand inside the tub when making this measurement; instead, stand outside the tub and measure from the bathroom floor. The width of the tub will complete the measurements of the bathtub dimensions.
How much is a standard bathtub?
A standard bathtub/shower combination averages $300 to $2,000 for materials. For a freestanding tub, material costs range from $600 to $20,000, depending on the material the tub is made from.
What is the difference between a soaking tub and a bathtub?
Deeper than the average bathtub, soaking tubs are designed to offer the ultimate in relaxation by allowing you to fully submerge. Some soakers can hold as many as 250 gallons of water, while the average bathtub holds between 25 and 45 gallons.
How do I know what kind of bathtub I have?
What Bathtub Material is in my Bathroom Step 1 – Press on the Side of the Bathtub. If you press on the side of your bathtub and it has a little give, chances are it is made of acrylic of fiberglass. Step 2 – Inspect Surface Damage. Step 3 – Hold a Magnet to the Tub. Step 4 – Look for Extra Supports.
Can I replace a 30 inch tub with 32?
The bigger issue is when the width of the new tub exceeds the old space. Replacing a 30-inch tub with a 32-inch tub is an example. If the floor is concrete, this makes adjusting the flooring more difficult.
How much space is needed for a bathtub?
While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide. Always allow clear space for access to plumbing and/or whirlpool motors.
How big is a soaking tub?
Soaking tubs range from a compact 54” to a whopping 90” or more in length; widths vary from a slim 19” to an oversized 76” (to comfortably hold two bathers, even those on the larger side).
How far should wall extend past bathtub?
Plan to extend the tile 2 or 3 in. beyond the tub and to leave at least a half tile along the wall if possible. Don’t stop tile even with the end of the tub. This leaves the walls along the front of the tub vulnerable to water damage, and doesn’t look as finished as tile extending to the floor.
What do you put under a bathtub for support?
Both regular thinset mortar and floor leveling compound are suitable. A series of strategically placed piles is easier to control than a full bed, and it provides comparable support for the tub. Level the subfloor in the alcove where you intend to install the bathtub, and cut the hole for the drain.
How far off the wall is a tub drain?
Bathtub Drain Measurements The drain hole should be a minimum of 12 inches away from the wall and 9 inches in scope. To rough in the drain, use a 1.5-inch pipe.
What is difference between alcove and drop in tub?
Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.
Can you put a regular bathtub in a mobile home?
There are a few different standard bathtubs for mobile homes: alcove, corner, oval, and whirlpool. The National Kitchen and Bath Association states that the average bathtub size in the US is 60″ x 30/32″ but that’s not the case with mobile and manufactured homes.
