Table of Contents
A round table that’s 9 feet in diameter can seat 11 to 14 people. What size round table seats 15? A round table that’s 10 feet in diameter can seat 12 to 15 people.
How long is a 10 seater table?
Tables are typically 36 inches wide, says Home Stratosphere. If the chosen table is less than this, the end may not be wide enough for a setting, in which case the required length must adjusted. To seat 10 people, with four on each side of the rectangle, the table must be 96 inches long.
How many can you seat at a 10 foot table?
4. How many chairs should I fit around a table? Plan for at least 2 feet of table surface for each chair. For example, a 10-foot-long table can have five chairs across and two at each end to seat 12 people.
How long is a 12 seater table?
You need about 1 1/2 to 2 feet to seat a diner comfortably, so a table about 9-10 feet long would work for 12. Pedestal tables can accommodate guests better since there’s no leg to get in the way.
How long is a table that seats 8?
A table that seats four should be about 48″ long. To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.
How long is a table that seats 20?
So if you’re looking for a large rectangular table to seat 20, you can start by putting 2 folks on the ends of the table, then count 2 people each 2′ to seat the remaining 18 — or a total table length of 18′ (216″).
How long is a table that seats 14?
A 120” long rectangular table can seat up to 14 adults, depending on table width.
How many chairs can fit at a table?
With a standard 20″ x 20″ chair in mind, here’s what we found: A 42″ round table can fit four people comfortably. A 48″ round table can seat 4-6 people comfortably. A 60″ round table can seat between 6-8 people comfortably.
How many people does a 72 table have?
Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.
How much space do you need for table seating?
The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.
How long is a table that seats 15?
A round table that’s 9 feet in diameter can seat 11 to 14 people. What size round table seats 15? A round table that’s 10 feet in diameter can seat 12 to 15 people.
How long is a table that seats 16?
Plank Top Table Size Guide Base Size 16″ Extensions Seating for 48″ x 72″ 1 16″ Extensions 10 – 12 48″ x 72″ 2 16″ Extensions 12 – 14 48″ x 72″ 4 16″ Extensions 14 – 16 48″ x 72″ 6 16″ Extensions 16 – 18.
How long is a table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How big of a table can I fit in a 10×10 room?
There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.
How do you seat 22 people?
Four 8-foot tables combine to make seating for 20-22 people (depending on if you add a seat where the tables join along the sides). This arrangement of tables may also be conducive for a large family meal, a conference or meeting, or to maximize space for seating up to 22.
How many can you seat at a 5 foot rectangular table?
If rectangular, and the table length is 5 feet: sits 4-6 comfortably; if it’s 5 feet round, up to 8 people comfortably; If rectangular, and the table length is 6 feet: sits 6-8 comfortably; if it’s 6 feet round: up to 10 people comfortably (if you use banquet chairs, you can squeeze 12 people);.
How many does a 90 inch table seat?
Tables that measure 90 inches and above are best for comfortably seating 8 or more people. Many of our large dining tables even come with extension leaves, which will expand the designs to greater lengths and fit more guests.
How many does a 60 inch table seat?
The 60 inch, or 150 centimeter, round banquet table, seating 8 or 10 people, is possibly the worst invention in the history of the hospitality industry.
How many chairs fit around a 120cm round table?
120-centimetre diameter with legs seats four. 150-centimetre diameter with a pedestal base seats six. 150-centimetre diameter with legs seats four. 180-centimetre diameter with pedestal base or legs seats eight.
How much room do you need for an 8 seater dining table?
Dining table sizes for eight can range from 72 to 96 inches long by 36 to 43 inches wide (6–8ft x 3ft–3’6″; 183–244cm x 91–110cm), with the lower measurements also a comfortable fit for six seats and the higher measurements suitable to squeeze 10 people.
How do you pick the right size dining table?
Measure the length and width of your dining space. Subtract 6 feet from both the length + width of the space to allow a 3′ clearance on all sides. The result is the maximum recommended size for your dining table. For example, if you have a 12′ x 9½’ space, the maximum size for your table would be 72” x 40”.
What size room do I need for a 60 round table?
You will want to have at least 24 inches between the table and walls for people to feel relaxed and have enough room to comfortably move around. Keep in mind that if you need more of a walkway between the table and the walls that 38 inches is a better number to shoot for.
