Table of Contents
What is a profile plane?
A third plane perpendicular to both coordinate planes, and hence to the ground line, is called a profile plane. This plane is vertical in position, and may be used as a plane of projection.
What is profile view in engineering drawing?
When you create a profile view, you specify which existing profiles to display on the grid. Use these profiles as a reference for drawing new layout profiles on the grid. A profile view can include one or more related profiles, along with multiple data bands along the X-axis, above or below the grid.
What are the different types of planes in engineering drawing?
2.1. 1 Reference planes Principal planes – horizontal plane and vertical plane –are the main reference planes used in orthographic projections. Profile plane, auxiliary vertical plane, and auxiliary inclined plane are also used as reference planes when two views of the object are not sufficient.
What is meant by plane of projection?
Definition of plane of projection : a plane that is intersected by imaginary lines drawn from the eye to every point on the object and that is therefore the plane on which the pictorial representation in perspective is formed.
What is auxiliary plane?
Auxiliary Plane The plane which we draw to get the true shape of the inclined surface ( often parallel to Principal Plane ) is an auxiliary plane. Simply, the plane other than the Principal Plane ( i.e. Horizontal Plane, Vertical Plane or Perpendicular Plane) is called Auxiliary Plane.
What is projected profile?
In Image Processing, projection profile refers to projection of sum of hits/positives along an axis from bi-dimensional image. Projection profile method is majorly used for segmentation of text objects present inside text documents.
Where is profile plane in engineering drawing?
In multi-view drawings, the right side view is the standard side view used. The right side view of an object shows the depth and the height dimensions. The right side view is projected onto the profile plane of projection, which is a plane that is parallel to the right side of the object.
What is cutting plane or section?
Cutting planes are used to create section views. The Cutting Plane command draws a cutting plane line on the part view you want to use as the basis for the section view. You can draw the cutting plane on any part view. This can be any orthographic, auxiliary, or detail view on the drawing.
What is a profile view?
n. 1 a side view, outline, or representation of an object, esp. of a human face or head. 2 a view or representation of an object, esp. a building, in contour or outline.
What is a plane in drawing?
A plane surface is a flat surface, and any distinct flat surface within a painting or sculpture can be referred to as a plane.
What is horizontal reference plane?
The horizontal reference planes are perpendicular to the coronal plane and therefore appear in a two-dimensional fashion. The distance was measured from each landmark perpendicular to the FH plane.
What is the plane view?
A plan view is an orthographic projection of a 3-dimensional object from the position of a horizontal plane through the object. In other words, a plan is a section viewed from the top. Basically, a plan view is just another name for the top view of a 3D object.
What are the 3 planes of projection?
Figure 5-4 shows the three principal (or primary) planes of projection, known as the VERTICAL, HORIZONTAL, and PROFILE PLANES. The angles formed between the horizontal and the vertical planes are called the FIRST, SECOND, THIRD, and FOURTH ANGLES, as indicated in the figure.
What are different planes of projection?
These include the Frontal Plane, Profile Plane, and Horizontal Plane: In addition to this, if a plane is placed at any other place, then it is called Auxiliary Plane. These are used to draw inclined surfaces of an object.
What is AIP and AVP?
Auxiliary planes are of two types: (i) auxiliary vertical plane or A.V.P., and. (ii) auxiliary inclined plane or A.I.P. (i) Auxiliary vertical plane is perpendicular to the H.P. and inclined. to the V.P. Projection on an A.V.P. is called auxiliary front view.
What is the principal plane?
a plane that is perpendicular to the axis of a lens, mirror, or other optical system and at which rays diverging from a focal point are deviated parallel to the axis or at which rays parallel to the axis are deviated to converge to a focal point.
What is sectional plane?
1 : a surface seen in section (as in cross section) 2 : a hypothetical plane cutting a section.
What is profile and its type?
A profile-type defines a set of properties, also referred to as a schema, inherent to all profiles of that type. This set of properties is used internally to group objects and enforce overall system constraints. Examples of common profile-types are.
How many types of profile are there?
Profiles are generally categorized into five different types: 1) Guest Profiles 2) Company profiles 3) Travel Agent Profiles 4) Group Profile and 5) Source Profile.
What is geographical profile?
A topographic profile or topographic cut is a representation of the relief of the terrain that is obtained by cutting transversely the lines of a topographic map. Each contour line can be defined as a closed line joining relief points at equal height above sea level.
What is principal plane in engineering drawing?
1 A plane of projection (POP) is a plane on which a particular. view is projected. 2 Three such planes, perpendicular to each other, are called. principal planes or reference planes (RP). 3 When the observer looks at the object from the front, the.
Where is the frontal plane?
A coronal plane (also known as the frontal plane) is any vertical plane that divides the body into ventral and dorsal (belly and back) sections. It is one of the three main planes of the body used to describe the location of body parts in relation to each other axis.
What do you mean by reference plane?
In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.
