Table of Contents
Cutting plane lines are thick lines that run through the center of the object that the interior wants to provide an interior view of. Two perpendicular lines with arrows showing in which direction the interior of the object should be viewed are drawn at the end of the line.
What is the purpose of a cutting line?
from The Century Dictionary. noun In bookbinding, a sketch-line drawn on a folded sheet of book-paper, showing where the cutting-knife will trim the margin.
How do you draw a cutting line on a plane?
Cutting plane lines are used to define section views. Choose Home tab→Drawing Views group→Cutting Plane . Click a part view. Draw the cutting plane. When you are finished drawing the cutting plane, on the ribbon, click Close Cutting Plane . Click to define the section view direction.
What is the cutting plane line used for and how does it look?
Half Section is used to the exterior and interior of the part in the same view. The cutting-plane line cuts halfway through the part and removes one quarter of the material. The line that separates the different types (interior and exterior) may be a centerline or a visible line.
Which type of line is used to draw cutting plane?
Explanation: Lines used to represent cutting planes is chain thin (narrow) with thick (wide) at the ends and at changing of position, lines used to represent centroidal lines and outlines of adjacent parts are chain thin double-dashed or long-dashed double-dotted (narrow).
Why is cutting in line bad?
Reaction. A negative and very assertive response from the rear of the line is expected when someone has cut in line up ahead under any circumstances in virtually all cultures. According to one study, a person cutting in line has a 54% chance that others in the line will object.
What is the difference between cutting line and stitching line?
The very edge of the pattern piece, where the fabric is cut. This outermost line is beyond the seamline (or sewing line) and the seam allowance.
What is a cutting line in engineering?
Cutting plane lines are thick lines that run through the center of the object that the interior wants to provide an interior view of. Two perpendicular lines with arrows showing in which direction the interior of the object should be viewed are drawn at the end of the line.
What is cutting plane or section?
Cutting planes are used to create section views. The Cutting Plane command draws a cutting plane line on the part view you want to use as the basis for the section view. You can draw the cutting plane on any part view. This can be any orthographic, auxiliary, or detail view on the drawing.
What is short break line?
Short break lines are thick, wavy solid lines that are drawn freehand. When either of these break lines is used to shorten an object, you can assume that the section removed from the part is identical to the portions shown on either side of the break. (thin and long with a zigzag) (thick and short, wavy freehand).
What is the function of cutting plane line Mcq?
Explanation: Section plane or cutting plane is an imaginary plane which is used to cut the object to visualize the geometry which is hidden inside the object and interpret it which plays an important role in designing many machine parts.
What is the cutting plane line passes through an object?
The sectional view obtained by passing the cutting plane fully through the object is called a full section. The arrows at the end of the cutting plane line indicate the direction of sight for the sectional view. The cutting plane line may be omitted if the view is in orthographic position.
What is the difference between section lines and cutting plane lines?
The section-lined areas are those portions that have been in actual contact with the cutting-plane. Half Section is used toshow the exterior and interior of the part in the same view. The cutting-plane line cuts halfway through the part and removes one quarter of the material.
What is line in technical drawing?
Lines in technical drawings are part of a specialized graphic language that is standardized throughout industry. Each type of line has a very precise symbolic meaning. Correct usage of this “alphabet of lines” is essential whether you use traditional drafting methods or CAD. Line weight is the thickness of the line.
What is the type of line used for line A?
What is the type of line used for line a? Explanation: Continuous thin straight lines are used to denote the dimensions of the object. Thin lines are used so as to distinguish between outline and the dimension line.
What is extension line?
Extension lines continue or extend from the surface of the object and establish the size of the dimension. They do not touch the object lines and extend slightly past the dimension line. Extension lines provide a means of displaying a measurement without placing the dimension on the part.
How do you react when someone cuts in line?
Know the Three Rules of Confronting Line Cutters Don’t get angry. ( See above for an explanation why.) Ask someone near by—preferably behind you—if they saw that person cut in the line. If they did, you now have an ally who has a vested interest in the outcome of the situation. Confront the cutter as soon as possible.
How do you cut a line?
Be polite when you ask to cut in front of someone. Asking to cut in line politely and showing manners will make the person you’re asking more inclined to say yes. A study showed that being polite when asking to cut in line resulted in the person saying yes roughly 60% of the time.
What is facing and interfacing?
A shaped facing is a separate piece of fabric cut from a pattern to the same shape and on the same grain as the garment edge it will finish. Interfacing should be applied to the facing piece of fabric, prior to any stitching. Stitch the facing together at the shoulder seams.
What is self facing?
Self-facing is a common term used in sewing as a method of cutting facing from the same fabric that has been used for the garment as a whole.
What is flat pattern?
The flat-pattern method is where the entire pattern is drafted on a flat surface from measurements, using rulers, curves and straight-edges. The flat pattern drafting method is the most commonly used method in menswear; menswear rarely involves draping.
