Table of Contents
(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Half Section. to the location as shown and click to place it. Drag the preview to the right and click to place the section view.
How do you crop a drawing view in SolidWorks?
To crop a view: In a drawing view, sketch a closed profile such as a circle. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.
How do you cut a view in SolidWorks?
To create a part cutaway view: In the part: Create a new configuration for the cutaway view. Cut the part as it should appear in the drawing view. In the drawing: Create a model view of the part using the configuration you made for the cutaway. Add cross hatching to the cut faces.
How do you do a half section view?
To Create a Half Section View Click Layout tab Create View panel Section drop-down Half. Click the view you want to use as the parent view. Click in the drawing area to indicate the start point of the section line. Click in the drawing area to indicate end point of the first segment of the section line.
How do I create a partial section view in SolidWorks?
Creating a Section View Manually Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager. Sketch a section line. Click to place the view.
Can you crop a section view in Solidworks?
You can crop any drawing view except a Detail View or a view from which a Detail View has been created. Crop View can save steps because you do not create a new view. For example, instead of creating a Section View and then a Detail View, then hiding the unnecessary Section View, you can crop the Section View directly.
How do I reduce view boundaries in Solidworks?
Resize the drawing view boundary Click the view frame. Click one of the handles on the view boundary. Drag the handles along the x or y axis of the view. When the view boundary changes size, the view frame adjusts with the new boundary size.
What is a multiview drawing?
Multiview Drawing. A multiview drawing is one that shows two or more 2D views of a 3D object.
What is half section view?
A half-section is a view of an object showing one-half of the view in section, as in the drawing below. The diagonal lines on the section drawing are used to indicate the area that has been theoretically cut. The lines are thin and are usually drawn at a 45-degree angle to the major outline of the object.
What is a partial section view?
Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.
What is Section AA in drawing?
The cutting plane is represented by a cutting plane line. The cutting plane line is defined as A-A, and the section view is defined as view A-A. Figure 4-42. All surfaces directly visible must be shown in a section view.
How do I create a partial section in Creo?
Partial views display geometry that exists inside of a sketched boundary. Open a drawing with one or more views. Double-click an existing view. Click the Visible Area category. Select Partial View from the View visibility list.
How do you cut a plane in Solidworks?
Creating Cutting Planes On the Models tab, click Add and click New Cutting Plane. In the model tree, select the cut plane. Type a Name for the plane. Use the Rotate and Transform options to modify the plane’s orientation. To add an additional cutting plane, click New Cutting Plane.
How do I crop an image in Solidworks?
Creating Crop and Details Views with No Outline In a drawing view, sketch a closed sketch profile, such as a circle. Select the circle. Click Crop View (Drawing toolbar) or Insert > Drawing View > Crop. Select the drawing view. In the PropertyManager, under Crop View, select No outline. Click .
How do you move a section view in Solidworks?
To move a drawing view, use one of the following methods: Click and drag an entity (including edges, vertices, cosmetic threads, and so on). Select a drawing view, then move (nudge) it with the arrow keys. Press Alt, place the pointer anywhere in the view, and drag the view.
How do I get rid of crop view?
To remove a Crop View: Right-click the drawing view in the graphics area or in the FeatureManager design tree and select Crop View > Remove Crop. The crop is removed and the view returns to its uncropped state.
How do I change the detail view in Solidworks?
Modifying a Detail View Right-click the profile sketch and select Edit Sketch. Edit the profile as needed to change the shape or size. Click Rebuild to update the detail view.
How do I change the drawing size in Solidworks?
Not to worry, with SOLIDWORKS it’s simple to set a custom scale for any drawing view. This can be done by first selecting the drawing view and then selecting “Use custom scale” in the Property Manager. Note that any changes to the scale of a drawing view will also affect the scale of any views projected from it.
What is a projected view in Solidworks?
Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.
How do you do a multi view drawing?
In engineering, various methods are used to represent objects. Among these, the engineering drawing or multiview drawing is a major means of communicating the design concept. In this method, orthogonal projection is used to draw and define an object.Multiview Drawings. View in Direction View From A Front B Top C Left D Right.
What is a Dimetric view?
Definition of dimetric projection : an axonometric projection in which only two faces are equally inclined to the plane of projection.
