Table of Contents
What is the standard depth of a drawer?
Depth: Standard depths are 14-inches, 16-inches and 20-inches. Height: The height of the drawer refers to the height of the drawer face. The actual height of the box is usually less.
What is the average depth of a dresser drawer?
What Are the Standard Dresser Dimensions? A dresser is defined as a piece of furniture with six, seven or even nine drawers that is roughly waist-high and wider than it is tall or deep. The typical, rectangular dresser usually measures about 60 inches wide, 20 inches deep, and 30 inches tall.
How do you measure the depth of a drawer?
Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.
How deep are IKEA Malm drawers?
The IKEA Malm 4-Drawer Chest has an overall height of 39.375” (100 cm), width of 31.5” (80 cm), and depth of 18.875” (48 cm).
How deep should closet drawers be?
Drawers for folded clothes should be set at a minimum of 18” (45.7 cm) with deeper drawers for multiple rows of folding clothing at a depth of 24” (61 cm). Deep drawers are consistent with standard closet depths 24” (61 cm).
What are standard drawer sizes?
Here are some of the most common. Small Dresser Drawers: Width – 12″, Depth – 14″, Height – 4″ Medium Dresser Drawers: Width – 28″, Depth – 16″, Height – 6″ Large Dresser Drawers: Width – 30”, Depth – 18”, Height – 8″.
How do you find the area of a drawer?
Measure the height and width of the drawer opening and add 1-1/2 inches to get the face size of the drawer. For example, if the drawer opening measures 18-by-22 inches, you will need to cut one piece 3/4-by-19 1/2-by-23 1/2 inches.
What is the average size of a chest of drawers?
Although there is no standard size for a chest of drawers, the most common size is 38 inches wide. A chest of drawers this size is small enough to fit in most bedrooms, but large enough to have ample storage space.
What is the standard height of a chest of drawers?
Dressers come in a large range of sizes to meet varied storage demands, but dressers commonly have overall depths between 18”-24” | (46-61 cm), heights between 30”-50” (76-127 cm), and widths between 30”-74” (76-188 cm).
How thick are drawer slides?
Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick. Face frame cabinet slides are easier to install using the specific, optional, face frame brackets. Length sizing is usually simplified by checking manufacturer’s charts, where the drawer size and cabinet depth are both stated.
How is cabinet depth measured?
Depth: Measure the side of your cabinets, from the cabinet front to where it meets the wall. Standard cabinets are 24 inches deep.
Is Malm being discontinued?
Ikea has announced it has stopped selling the Malm dresser, one of its most-popular, and is recalling millions the items in North America after the deaths of six children in the United States.
Is Malm discontinued?
Ikea discontinued sales of the Malm furniture line in 2016, when the first toddler deaths were reported.
How deep are standard closet shelves?
Some Important Numbers to Keep in Mind. A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
What is the standard depth of a closet shelf?
Unless your closet uses tall doors or doors that go all the way to the ceiling, a 12 inch shelf depth is recommended. The reason is because of the space between the header and the top shelf in the closet. In standard construction, the bottom of a header is typically positioned at 72 inches from the floor.
How deep are bottom kitchen cabinets?
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn’t too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
What size are drawer boxes?
Allow at least 1/4” of clearance above and below the drawer, giving you a height of 5-1/2” (6” minus 1/4” at top and 1/4” at bottom). Your drawer box should be 17” wide, 5-1/2” tall and 22” deep.
How do I choose a drawer slide size?
Measure the box, not the drawer front Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.
How thick should kitchen drawers be?
Drawer Basics The sides and back of the drawer should be 1⁄2” or 5⁄8” thick. Use thinner stock for smaller drawers and thicker stock for big ones. The bottom is usually 1⁄4“-thick plywood for small drawers or 1⁄2“-thick material for bigger drawers, or drawers that will hold heavy objects.