Table of Contents
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
How do I find my actual draw length?
How the actual draw length on a bow is measured is done using the AMO standard. This is done by measuring from the inside of the nock goose of you arrow to the pivot point (deepest part) of the grip then adding 1.75inches.
How do I know if my draw length is too long?
The bow arm should move toward the target when the shot is fired. If the bow arm drops or swings to the side, the draw length is probably too long. When this happens, the scapula has already pushed the bow arm out as far as it can extend before the arrow is released.
Is 70 lb draw too much?
For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.
How do I measure my draw length myself?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
How do you measure your draw length for a bow?
The draw length of the bow is determined by measuring from the nock point to the point directly above the deepest part of the grip, where the arrow crosses the riser. This point is easily found with the use of a bow square.
How long should my arrow be for a 28-inch draw?
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
What is the average draw length?
If you have an average draw length of 27 to 29 inches, any modern compound bow matched with a good arrow and set to 60 pounds will work just fine on whitetails, mule deer, pronghorns, and the like with whatever broadhead style you prefer, so long as your shot placement is good.
How long should my arrows be for a 29 inch draw?
it depends on the arrows you choose, you need at least 1/4″ of arrow overhang on the rest. so you can probably shoot an arrow that’s about 28 1/4 for rests that are set up normally. and go all the way up to full length 36″ arrows for indoor. i would suggest 1″ of overhang on your rest.
Can draw length be adjusted?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How does draw length affect draw weight?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can. I have done this in the past by using a longer bow string. FOr each inch longer, it added 3 or 4 pounds of weight if I rememebr right.
What draw weight do most hunters use?
Some shooters are capable of shooting 70, 80 or 90lbs, but most adult males shoot between 60 and 70lbs. Today’s bows are extremely efficient and 40lb compound bows are more than capable of harvesting many big game animals. For whitetail deer hunting anything above 40 lbs is fine.
What draw weight should I shoot?
As a rule of thumb, 40 pounds of kinetic energy efficiently kills whitetails, and 50 pounds or greater is required for larger game such as elk, moose or bear. When I bought my first Mathews bow, it had a 70-pound draw weight.
Whats the best bow on the market?
What are the fastest compound bows? Model Max Speed (feet per second) Bowtech Prodigy (see below) 343 Elite Archery Impulse 34 340 PSE Evolve 31 338 Diamond Archery Deploy (see below) 330.
How long should my arrows be for a 26 inch draw?
How to: Select the perfect arrow Bow Arrow length Draw weight lb. 25″ 26″ 15-20 700 700 20-25 700 700 25-30 700 600.
How long should arrows be for 27 inch draw?
The arrow must be 29″ in length and supported by two points, which are 28″ apart. The number of inches the arrow deflects or bends due to the weight, is the spine size or measurement of an arrow. DYNAMIC spine describes the way an arrow reacts from the stored energy of a bow as it is shot.
How long should my arrows be for a 28.5 draw?
A good rule of thumb is to cut it no shorter than the middle of the riser. At full draw, your arrow end would sit right in the middle of the shelf.
What happens if arrow spine is too stiff?
If the arrow’s spine is too weak or too stiff, the arrow will not correct itself as soon as it should while in flight. If that arrow is weak and continues to flex (has a low spine rating), it’s going to veer off target. While an arrow will necessarily twist and turn in flight, what you don’t want it to do is wobble.
What happens if arrows are too long?
If, however, by being too long, the arrow’s dynamic spine is too low, then the arrows will not be accurate as they will tend to “fishtail” in flight. They will also tend to fly to the right (for a right handed archer).
Are 340 or 400 arrows heavier?
A weaker arrows is “softer”. Generally 600 arrows are for bows from 15–35 pounds in draw weight, 500 for 35–55 pounds, 400 for 55–75 pounds, and 340 for 75–95 pounds.
