Table of Contents
It is standard practice to use dashes to represent any line of an object that is hidden from view.
How do you show hidden lines in a drawing?
To show or hide hidden edges in the Drawing View Properties dialog box: Right-click the drawing view and select Properties. Select the Show Hidden Edges tab.
How are hidden lines identified in a technical drawing?
A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view.
Which type of lines are used to represent hidden edges?
Figure 5: Use of dashed lines to represent edges hidden in views of a complicated object.
What do hidden lines represent on Multiview drawings?
would appear as hidden lines in an orthographic multiview drawing? These are the three views associated with the object you just built. Hidden lines are dashed lines used to represent internal features that are obscured by the object.
How do you make hidden lines visible in Inventor?
Solution: Right-click the view. Click in the drop-down menu Edit View In the dialog box Drawing View click on the Hidden Line button. If you see this icon. , it means that you have activated the checkbox on Style above the buttons. After clicking the OK button, you should see the hidden lines, in the view(s).
What is a phantom line?
Lines that are made visible as dots or dashes to reveal the edges of objects currently hidden from view.
What do hidden lines represent?
Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line.
Are hidden lines shown in isometric drawings?
Usually only the visible surfaces of an object are drawn in isometric, with hidden lines left out. Although this is considered the preferred practice, there are always times when hidden lines are needed to clarify very complex isometric drawings.
What is a visible line?
Visible lines are the edges or “outlines” of an object. They are drawn as solid lines with a thick/heavy weight.
Which pencil is used for hidden line?
Hidden lines will be drawn with a 0.7 mm pencil. These lines are thin lines made up of alternating long and short dashes. They are used to indicate the center of circles and of symmetrical features. Also as an aid in dimensioning.
Why hidden lines and center lines are used?
Hidden lines in a drawing represent the edges where surfaces meet but are not directly visible. Hidden lines are omitted from pictorial drawings unless they are needed to make the drawing clear.
What do hidden lines in orthographic projections represent Mcq?
d) hidden lines. Explanation: The object will generally kept at a distance from planes so to represent the shape in that view projectors are drawn perpendicular to plane in orthographic projection. Projectors are simply called lines of sights when an observer looks towards an object from infinity.
How do you hide lines in Solidworks drawing?
To hide or show edges in a drawing: Click Hide/Show Edges. Select the edges to hide (you can select edges individually, or use box selection), then click . To show edges, click Hide/Show Edges. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .
How do I make hidden lines visible in Autocad?
Show Hidden Lines in the Current Viewport Select the viewport in which you want to show hidden lines. Click View tab Palettes panel Properties palette. On the Properties palette, under Misc, in the Shade Plot field, select As Displayed.
How do I make hidden lines visible in Solidworks?
Click Tools > Options > System Options > Display. Select Solid or Dashed for Hidden edges displayed as. Click OK.
What is section line in drawing?
Section lines are special lines placed on a drawing which indicate the area of the drawing through which an imaginary cut has been made to reveal internal details. These lines are drawn at full density and should be drawn at certain dimensions.
What are center lines?
2.2 Center lines. Center lines denote a circular feature such as a shaft or a hole. A rectangular feature seen on an elevation of a drawing could be identified either as a circular feature or a rectangular feature. The center line is the method of quickly identifying the shape.
What do hidden lines in orthographic projection?
What do hidden lines in orthographic projections denote? Explanation: Hidden lines denote those parts which cannot be seen when viewing the object. They are used when there are holes or slots in the object if they cannot be viewed directly. Change of plane is indicated by outlines.
Can hidden lines overlap?
The overlapped areas of the objects that lie behind (referred to as the background) are drawn as hidden lines. Objects overlapping each other this manner are said to be involved in a “hide situation”. Any closed contour on a contour layer or a non-mechanical layer can be selected as a foreground object.
Which of the following lines used to indicate the part of the drawing to which a note refers?
Leaders are solid lines with one arrowhead and indicate a part or portion to which a note, number, or other reference applies. Break lines indicate that a portion of the object is not shown on the drawing. Short breaks are made by solid, freehand lines.
How is a Centre line represented in an engineering drawing?
Centerlines indicate a circular feature on a drawing. In 2D, most circular features look exactly the same as features with non-circular geometry. The only way to tell them apart is by adding a centerline, which represents their central axis and confirms their geometry.
How thick are hidden lines?
2.4.1 Object Lines and Hidden Lines It has a thickness of about 0.024″ (0.6mm). Lines hidden from view by material in front of them are called hidden edge linesDashed lines that represent any line of an object that is hidden from view by material in front of it..
Which line used to present alignment or a hidden part of the object in a drawing?
What is a “Section View” ? A section view is a view used on a drawing to show an area or hidden part of an object by cutting away or removing some of that object. The cut line is called a “cutting plane”, and can be done in several ways.
