Table of Contents
What can I use instead of drawer pulls?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
What are the different types of drawer pulls?
Cup/Pin Pulls. Handle/Bar Pulls. Bail Pulls. Finger Pulls. Appliance Pulls. Drop/Hanging Pulls.
What is the most common type of drawer pull?
Bar Pulls – These tend to be the most common type of pull we see. They work well on most styles of cabinet door, from shaker to more contemporary, because there are almost endless varieties, sizes, and styles available.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
What is a cabinet pull?
What is a Pull? Pulls are small fixtures attached to drawers’ front faces to allow them to be pulled open. To make installation simple, cabinet drawers and doors are often made with a precut hole to help assist with consistent placement.
What is considered kitchen hardware?
The kitchen hardware holds significant weight towards shaping the design of the room. From brass door knobs to chrome cabinet handles, elegant kitchen hardware polishes the room with subtle details. We have an extensive collection of kitchen door knobs, cabinets pulls, decorative handles and more.
What are cabinet knobs made out of?
Cabinet hardware is available in countless finishes, but looks can be deceiving. Why is one cabinet knob thirty dollars and another three dollars? Here are the basics: Most hardware is made from inexpensive zinc or more expensive copper and brass.
What are standard drawer pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Which is better knobs or pulls?
Determine If You Want a Knob or Pull One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull. It is much more comfortable to open a drawer using a pull.
Which is better cabinet knobs or pulls?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
How do I choose cabinet pulls?
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
Should drawer pulls be centered?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
How do you put hardware on a dresser?
How To Replace Old Furniture Hardware With New Drawer Pulls Prepare the furniture for painting. Remove the original hardware. Drill a hole for the new hardware. Protect the inside of the drawer. Fill old hardware screw holes with wood filler. Sand the wood filler. Paint the furniture.
What are cabinet handles called?
Nevertheless, cabinet handles, also called cabinet pulls, and their near kin, cabinet knobs, can make a big difference in the look and utility of your kitchen.
Is Brushed nickel out of style 2021?
As a general rule, brushed nickel is a classic finish that is an excellent choice for either kitchen or bathroom hardware. While brushed nickel may not be one of the top finishes for 2021, it is certainly a safe option that will not require updating any time soon.
Is Brushed nickel out of style 2020?
You may be wondering if brushed nickel is going out of style. While it’s not considered trendy anymore, it is a hardware finish that looks good in most spaces, is affordable and widely available.
Is oil rubbed bronze going out of style?
Oil rubbed bronze is officially an out of style decorating trend. Consider spray painting oil rubbed bronze light fixtures to a more contemporary color. A better alternative is to use black metal. Matching furniture sets are no longer in style.
Is zinc or steel better for cabinet pulls?
Though some Zinc alloys can be very strong, overall stainless steel is stronger. However, zinc is a heavy element, and when alloyed with other metals it provides better corrosion resistance, stability, dimensional strength and impact strength.
Are zinc cabinet pulls good?
Zinc is a good metal for cupboard pulls. Zinc alloy is a safe material for manufacturing cabinet hardware. Furniture handles, which are produced using zinc alloy material, are very durable and long-lasting. It is a material that is resistant to bad weather, moisture, and water due to its zinc composition.
Do copper drawer pulls tarnish?
Simple pastes made from common cleaners can remove tarnish from copper cabinetry hardware. Often called brightwork, handles, pulls, knobs and other copper cabinetry hardware are an impressive addition to the kitchen.
