Table of Contents
If there is a conflict between the Drawings and Details on Drawings and the Specifications, then the Specifications will prevail. The higher “Order of Precedence of Documents” governs or prevails.
Do specifications govern over drawings?
In order to resolve discrepancies between specifications and drawings, the contract included the following: General requirements, which stated “in case of differences between project specifications and the accompanying drawings, the specifications will govern.”Aug 28, 2017.
What is the major difference between drawings and specifications?
By definition, drawing notes that describe materials, equipment, systems, standards, or workmanship are specifications. And, though far less common, graphic images that appear on small paper are drawings.
What takes precedence drawings or bill of quantities?
If the contract is with quantities, the BoQ as prepared by the Employer takes precedence over the drawings and specification. Any missing items from the BoQ are dealt with as a change and therefore a client risk.
What are drawings and specifications?
Construction Drawings and Specifications are the documents used to convey the intent of Consultant for the purposes of constructing the Project. Sample 1. Based on 1 documents.
What is the relationship between specification document and drawing?
The drawings reflect what the project specifications are unlikely to cover; and the project specifications indicate what the drawings are unlikely to portray. Specifications are also sometimes used to further clarify details that are not adequately covered by the drawings and notes on the drawings.
What is the difference between specifications and construction drawings?
Your house plans are a set of scaled drawings that show contractors what they are building. Your specifications (or specs) are a written document that details what materials will be used and how to install things.
What is the purpose of specifications in a set of working drawings?
According to the Dictionary of Architecture & Construction a specification is, “a written document describing in detail the scope of work, materials to be used, methods of installation, and quality of workmanship for a parcel of work to be placed under contract; usually utilized in conjunction with working (contract) Aug 7, 2020.
What are the two general means of resolving conflicts between the plans and specifications?
There are two effective strategies when it comes to resolving disputes in construction: compromise and problem-solve. The first means parties give up or give in until they meet in the middle, while the second means parties work together to find an alternative solution.
Why should an architect have a good working knowledge about specification writing?
A specification can support project costing, not only the materials and products but the performance and workmanship. By being clear, concise and information-rich, a specification provides answers to many onsite construction questions, saving the project team, client and contractor time and money.
What happens when there is a discrepancy in the drawing or contract documents?
The Owner shall make the necessary correction. If the Contractor, without notifying the Owner of such discrepancy, performs his work according to the drawings notwithstanding such discrepancy, the Owner may direct the Contractor to redo his work without an adjustment of his Contract Price and his Contract Time.
What is limit of retention in construction?
What is the ‘Limit of Retention Money? Retention sum is subjected to limit as per the stated percentage in the contract which is known as ‘Limit of Retention’. In general, ‘Limit of Retention’ is 5% of the contract sum. Therefore once the Limit of Retention is reached, you cannot deduct further Retention Money.
What is Bill of Engineering Measurement and Evaluation?
For civil engineering works, estimates are usually presented in a standard format called the Bill of Engineering Measurements and Evaluation BEME. The BEME serves as a tool for estimating the cost of construction of the project before, during and after its implementation.
Do architects own their drawings?
Thus, while architects and engineers may own their original models, drawings, and specifications, they do not own their designs. Copyrights belong to the author of the work, except works “for hire,” created as part of the author’s employment.
Why are drawings so important to the construction industry?
Drawings are important because they are used to communicate the technical details of a project in a common format. The drawings also become the foundation for future projects and cost savings for customers. After construction of the control panel, the same set of drawings is used for on-site installation.
What is the purpose of a specification?
The purpose of a specification is to provide a description and statement of the requirements of a product, components of a product, the capability or performance of a product, and/or the service or work to be performed to create a product.
What type of drawing is used for working drawings?
They may include architectural drawings, structural drawings, civil drawings, mechanical drawings, electrical drawings, and so on. Traditionally, working drawings consist of two-dimensional orthogonal projections of the building or component they are describing, such as plans, sections and elevations.
What is the difference between shop drawings and working drawings?
Working drawings help to represent components and communicate with end clients. Shop drawings, on the other hand, are used by fabricators to know how the components will be manufactured and installed during the construction process.
How can we determine if it is a working drawing?
A working drawing is a drawing or blueprint based on explanations. It is completed with a thorough plan and views (details, notes, and dimensions) to ensure the product construction or replication without any additional information.
What may happen if architect fails to give the correct specification or no specifications?
Specifications should use technically correct terms, and avoid slang or “field” words. Specifications should avoid fielding conflicting requirements. Specifications should avoid repeating requirements stated elsewhere in the Contract. Confusion may result in some cases when there are exceptions to these understandings.
What are seven types of specifications that may be included in a drawing plan?
Best Practices When Writing Specifications When writing project documents, you should follow the seven C’s: clear, concise, correct, complete, comprehensive, consistent, co-ordinated. These apply not only for textual documents, but also for information provided directly on drawings and schedules.
What information is contained in the specifications?
Specifications describe the products, materials, and work required by a construction contract. They do not include cost, quantity, or drawn information, and so need to be read alongside other information such as quantities, schedules, and drawings.
What are the disadvantages of specification?
Disadvantages It is a time-consuming process as it has to be very thorough and complete. A job description is time-bound and changes with changing technology and changing knowledge & skill requirements.
Why do we use specifications as a quality tool?
A specification becomes an essential contract management document which is used to ensure that the chosen supplier provides what is specified. It must therefore be clear and accurately define what is expected from a supplier regarding the outputs or the functional and performance requirements.
What is the importance of test specifications?
The test specifications for an exam program provide essential planning materials for the test development process. Thorough, thoughtful test specifications can guide the remainder of the test development process, especially item writing efforts and test assembly.
