Table of Contents
The submission requirements and the format for shop drawings should be contained in the specifications. The architect must take care to review only those portions of the shop drawings which relate to the architectural design. The consultants and engineers are responsible for reviewing their part of the design.
Do architects review shop drawings?
7: The Architect will review and approve or take other appropriate action upon the Contractor’s submittals such as Shop Drawings, Product Data and Sam- ples, but only for the limited purpose of checking for conformance with information given and the design concept expressed in the Contract documents.
Who is responsible for reviewing shop drawings?
The structure representative or a civil engineer registered in the State of California must review the shop drawings for adequacy and compliance with all contract requirements and all requirements in this manual. An engineering analysis must be performed, see Section 2-4.03, Engineering Analysis.
Does the architect need to approve the subcontractor’s shop drawings?
The architect will rarely have any obligation to approve a sub-contractor’s shop drawings unless the sub-contractor has a design obligation or the contract documents expressly require the architect to approve such drawings.
Who is generally considered as being responsible for the accuracy of dimensions on shop drawings?
Regardless of the Owner’s review and approval, the Contractor and the Fabricator are responsible for the accuracy of Shop Detail Drawings , the “Fabricator must ensure all material, geometry, and connections shown on the Shop Detail Drawings are in conformance with the Contract,” (see Section 2.1.
Do shop drawings supersede contract drawings?
The fabricator’s drawings are then given to “the shop” for use in making the component – thus the name “shop drawing.” As one court stated, “shop drawings are the final word as to how the work should proceed on the job, and supersede the architectural plans.”Jan 6, 2020.
Are shop drawings considered design?
Shop drawings (also known as fabrication drawings) are detailed plans that translate design intent. With the help of shop drawings, you will be able to figure out the kind of materials you will require for the components, the dimensions of the proposed installations, and the timelines.
How long does it take to review shop drawings?
For example, the engineer might agree to process all shop drawings within 10 business days of receipt.
Are shop drawings stamped?
Mark Gilligan SE, Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What is a shop drawing review?
Shop drawing review is the first level of a quality assurance program, is vital for the successful delivery of fabricated materials to the field, and is also important for fabricated materials that are not accepted based on “Fabrication Inspection” per MDOT’s Materials Quality Assurance Procedures manual.
What is the difference between design drawing and shop drawing?
Design drawings are used in the early stage of design development as a means to communicate design ideas and proposals. In comparison, shop drawings provide the details needed by a fabricator during fabrication, assembly, installation and erection, such as the specified material, weld types and connections.
Is a shop drawing a contract document?
Shop Drawings—All drawings, diagrams, illustrations, schedules, and other data or information that are specifically prepared or assembled by or for Contractor and submitted by Contractor to illustrate some portion of the Work. Shop Drawings, whether approved or not, are not Drawings and are not Contract Documents.
What are the 6 types of construction drawings?
What Are the Six Types of Construction Drawings? Plans. Interior and exterior elevations. Building and wall sections. Interior and exterior details. Schedules and room finishes. Framing and utility plans.
Are shop drawings and submittals the same thing?
The shop drawing process formalizes the method for a contractor to demonstrate how it will accomplish these design obligations. The submittal process forces the contractor to show how it intends to execute the work and allows the design professional to review those intentions for com- pliance with the design intent.
What is the difference between product data and shop drawings?
1: “Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor…” 3.12. 2: “Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor…”May 12, 2006.
What do shop drawings include?
Shop drawings, or Technical drawings, are drawings or set of drawings that are produced by fabricators, contractors, subcontractors, manufacturers, or suppliers. They include plans, elevations, views, sections, and many other details and are typically required for prefabricated components.
What is the difference between IFC drawings and shop drawings?
Shop drawing is a drawing that is produced by the contractor, subcontractor, manufacturer, fabricator or the supplier whereas IFC (Issued for Construction) is a type of drawing issued to the contractor by the client or his/her representative. Drawings are the cornerstone of every construction.
What are approved shop drawings?
Shop drawings means drawings, submitted to the PHA by the Contractor, subcontractor, or any lower tier subcontractor, showing in detail (1) the proposed fabrication and assembly of structural elements and (2) the installation (i.e., form, fit, and attachment details) of materials of equipment.
How do you make a shop drawing?
2.1 PREPARATION OF SHOP DRAWINGS Shop drawings are prepared following a review of the drawings, specifications and contract documents supplied by the registered professional of record – and other project consultants as may be applicable – and the resolution of any inconsistencies or requested changes.
How do you review as built drawings?
Tips for Recording As-Built Drawings Cross out words such as “equal to” or “similar to” and replace them with the specific information used during the construction process. When adding detail to the drawings, make sure to use the same scale as was used in the original drawings.
What is steel shop drawings?
Shop drawings are typically a set of drawings required for prefabricated components. These drawings are usually produced by the fabricator, manufacturer, contractor or supplier. Shop drawing includes dimensions, manufacturing standards, fabrication. They contain more details compared to construction documents.
Who is responsible for structural steel shop drawings?
The contractor, therefore, produces Shop Drawings for two purposes. One is to provide the fabrication shop with the necessary information to produce the steel components and assemblies required to complete the project.
How many days should be allowed for submittal review?
A contractor should allow about 14 days for review for small to medium sized projects. Some submittal contracts may include statements such as “Architect/Engineer to notify the Contractor if the review would take more time”.
