Table of Contents
What sizes do drawer pulls come in?
Standard Drawers (about 12″ – 36″) Standard-sized drawers can use any of the following pull sizes: 3” (one or two), 4” (one or two), 96mm, and 128mm.
What size are most drawer pulls?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
How do you measure to replace drawer pulls?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
Can you change the size of drawer pulls?
One of the most common problems with changing the hardware on older pieces is when drawer holes don’t fit standard pulls. While it takes a little effort, you can easily move or resize hardware holes and still pull of a professional finish.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
What size pulls for 36 drawer?
Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
What are standard cabinet pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
How Big Should cabinet knobs be?
Knobs that are 1 ¼” to 1 ⅜” are standard for most applications. Any knob that is 1 ½ inches or larger is generally used on larger cabinets or if someone is really trying to make their hardware stand out and look more dramatic.
How many different size pulls on cabinets?
One of the most popular options is to pick one size and use it throughout your cabinetry. There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes).
How do you measure a dresser for hardware pulls?
To find the center-to-center measurement, use a screwdriver to remove your current pulls, then take a ruler or measuring tape and measure from the center of one screw hole to the center of the other screw hole.
What is center to center measurement for cabinet pulls?
The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.
Can you replace knobs with pulls?
Replacing knobs with handles is a quick way to update a kitchen while making it more comfortable and convenient to use. Low end cabinet handles can be priced as low as $1 each. High end handles range between $15 to $20 a piece.
Are kitchen cupboard handles standard size?
Standard pull handles tend to range between 3 and 4 inches (96 to 128mm) in width, with smaller T-pulls often used for small cabinets and drawers. As a rule of thumb, the larger the drawer or cabinet, the larger the handle should be.
What size drawer needs two pulls?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly).
Are knobs or pulls better for kitchen cabinets?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Do hinges and pulls have to match?
Door handles, fixtures and fittings, and other hardware don’t have to match exactly, but they should blend together to make a harmonious space. If you want a cohesive aesthetic, select hardware that’s a similar colour to the finish on your fixtures and appliances.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
Can you mix knobs and pulls on kitchen cabinets?
You can coordinate knobs and pulls from different collections by choosing the same finish. But make sure the finish matches perfectly. Even slight variations will be noticeable.
