Table of Contents
(e) All numbers, letters and reference lines, appearing on the drawings, shall be simple and clear. Brackets, circles or inverted commas shall not be used in association with numbers and letters. (f) All lines in the drawings shall, ordinarily, be drawn with the aid of drafting instruments.
How do you label patent drawings?
The drawing must have an appropriate title that clearly satisfies the purpose of the drawing. It must have the name of the inventor, application number, or docket number (if provided) on the front of each sheet and centered within the top margin.
What are the special requirements of a patent drawing?
Also, the drawing must include application number, Inventor’s name, Invention’s name, and identification. Size of the drawing must be 11inch by 8.5 inches and must be white in color. It must be flexible, plane, non-shiny and free of overwriting, alterations and marks of erasing.
What do the numbers on a patent drawing mean?
In a drawing figure, each part of the invention which needs to be discussed will be “called out” with a reference number, usually connected to the part with a line. If a reference number is underlined (as in 3, in the cut-away view below), it refers to the part on which the number is superimposed.
Do patent numbers have letters?
16 codes (kind codes) include a letter, and in many cases a number, used to distinguish the kind of patent document (e.g., publication of an application for a utility patent (patent application publication), patent, plant patent application publication, plant patent, or design patent) and the level of publication (e.g.
Where should the number of each sheet be placed?
Numbering of Sheets of Drawings The sheets of drawings should be numbered in consecutive Arabic numerals, starting with 1, within the sight as defined by the margins. These numbers, if present, must be placed in the middle of the top of the sheet, but not in the margin.
Do patent drawings have to be black and white?
The patent rules provide that black and white line drawings are normally required for patent drawings. 37 CFR 1.84(a)(1). There is a rule for filing drawings in color, but it requires filing a petition to allow color drawings and paying a fee (for a utility patent application). MPEP 608.02(VIII).
Do patent drawings need to be numbered?
All sheets of drawings must be numbered in the center of either the top or the bottom of each sheet but not in the margin in numbers larger than those used as reference signs in order to avoid confusion with the latter. For drawings, a separate series of page numbers is to be used.
What is a poor man’s patent?
The theory behind the “poor man’s patent” is that, by describing your invention in writing and mailing that documentation to yourself in a sealed envelope via certified mail (or other proof-of-delivery mail), the sealed envelope and its contents could be used against others to establish the date that the invention was Oct 13, 2019.
What are the 3 types of patents?
Patents protect inventions and new discoveries that are new and non-obvious. There are three types of patents: utility patents, design patents, and plant patents.
Do patent drawings have to be to scale?
The drawing should be drawn on a scale that will not be crowded when reproduced at 2/3 size. Indications like “full scale” or “1/2 scale” are not acceptable since they lose their meaning with reproduction in a different format. Shading is encouraged where it aids in understanding the invention.
How many drawings are in a patent?
For a patent application, at least one drawing is required. Patent drawings are important for helping illustrate and explain how the invention works.
Can patent drawings be in color?
Color drawings are acceptable in US patent applications, but not in international applications (see PCT Rule 11.13). Copies of this patent or patent application publication with color drawing(s) will be provided by the Office upon request and payment of the necessary fee.
How many digits are in a patent number?
Utility : Patent numbers consist of six, seven or eight digits. Enter the Patent number excluding commas and spaces and omit leading zeroes.
What does A1 mean in a patent number?
Utility Patent Application Kind Code Kind of document A Utility Patent Grant issued prior to January 2, 2001. A1 Utility Patent Application published on or after January 2, 2001 A2 Second or subsequent publication of a Utility Patent Application.
What does the letter at the end of a patent number mean?
In the USPTO, a kind code of “B1” means a granted patent for which there was no previously published pre-grant publication. But in EPO, a kind code of “B1” means a second publication for a patent application.
Why are drawings numbered?
Drawing numbers should be given in all memoranda whenever drawings are transmitted. The drawing numbers are a positive means of identification, and they minimize potential difficulties if drawings become detached from the transmittal memoranda.
How do you label architectural drawings?
Typically, the architect will identify each drawing with a letter and number. The letter denotes the plan series: A for architectural plans, S for structural engineering plans, E for electrical plans, M for mechanical plans, and P for plumbing plans. The number refers to a specific plan type.
How do you label working drawings?
Drawing Labels title of the drawing. drawing number. scale of drawing. paper size. drawing sheet number of referenced drawing (where applicable, ie sections, elevations.).
Can you use photos in a patent application?
Photographs, including photocopies of photographs, are not ordinarily permitted in a design patent application by the U.S. Patent and Trademark Office (“USPTO”).
Does the Uspto accept color drawings?
Color drawings are permitted when they are the only practical medium to disclose a claimed invention and even then an applicant must petition the USPTO to accept them. The USPTO, however, permits the electronic filing of color drawings via EFS-Web.
Can you file color drawings in a PCT application?
A: The PCT makes no provision for color drawings (or photographs1) and, furthermore, according to PCT Rule 11.13, drawings are to be “executed in durable, black, sufficiently dense and dark, uniformly thick and well defined, lines and strokes without colorings” [emphasis added].
