Table of Contents
Can we create auxiliary views in 2D drawings solidworks?
(Drawing toolbar), or click Insert > Drawing View > Auxiliary. As you move the pointer, a preview of the view is displayed if you selected Show contents while dragging drawing view. You can also control the alignment and orientation of the view.
What is the purpose of auxiliary views in 2D drawings?
When an object has a slanted or inclined surface, it usually is not possible to show the inclined surface in an orthographic drawing without distortion. To present a more accurate description of any inclined surface, an additional view, known as an auxiliary view, is usually required.
How are auxiliary views created?
Auxiliary views are created by positioning a new line of sight relative to the object. It is possible to create any number of auxiliary views, including a new auxiliary view from an existing auxiliary view. – A primary auxiliary view is a single view projected from one of the six principal views.
What is an auxiliary view CAD?
An auxiliary view is one that is projected onto a plane perpendicular to one of the orthographic views and inclined in the adjacent view. A rubber-band line perpendicular to the inclined plane helps you select the center of the new viewport.
How do I crop an auxiliary view in Solidworks?
To crop a view: In a drawing view, sketch a closed profile such as a circle. Click Crop View. (Drawing toolbar), or click Insert > Drawing View > Crop. The view outside the profile disappears. A circle is drawn on this Section View. After cropping, only the view inside the circle is displayed.
What are the 6 types of auxiliary view?
Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.
What is the necessity of auxiliary view?
Additional or auxiliary views are necessary to represent the true size and shape of other plane surfaces. A plane perpendicular to only one of the three principal planes is said to be in an inclined position; a plane not perpendicular to any of the principal planes is said to be in an oblique position.
What is the principal reason for using an auxiliary view?
Auxiliary Views Allow Principal Faces Of Features That Are Parallel To The Standard Planes Of Projection To Appear True Shape And Size.
Do auxiliary views have hidden lines?
Later, when you are familiar with drawing auxiliary views, omit hidden lines when they do not add needed information to the drawing. intent. An auxiliary section is simply an auxiliary view in section.
What type of drawing has the same level of detail as a two view drawing?
A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. with dimensions, multiview drawings serve as the main form of communication between designers and manufacturers. All three-dimensional objects have width, height, and depth.
What is the second step in constructing auxiliary drawing?
The second step is to decide which line or surface is to be shown in an auxiliary view andwhich orthographic view it will be projected from. The following facts must be considered when rendering this decision: 1. Front or rear auxiliary views are always projected from a side view.
What is depth auxiliary view?
Depth auxiliary – The inclined surface will appear foreshortened in a top view and a right-side view. The inclined surface will appear as a line or edge in the top view (see Figure 2). Width auxiliary – The inclined surface will appear foreshortened in a top view and a front view.
What is auxiliary plan?
Auxiliary Plane The plane which we draw to get the true shape of the inclined surface ( often parallel to Principal Plane ) is an auxiliary plane. Simply, the plane other than the Principal Plane ( i.e. Horizontal Plane, Vertical Plane or Perpendicular Plane) is called Auxiliary Plane.
How do I create an auxiliary view in Autocad?
Create and Edit an Auxiliary View On the ribbon, click Place Views tab Create panel Auxiliary . Select an existing view as the parent view. In the Auxiliary View dialog box, set the scale, display style, and view label or accept the current settings. (Optional) Click an icon to specify the display style for the view:.
Why sectional views are used in drawing?
A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.
How do you create a detail view?
Creating a Detail View / Detail View Profile In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar). Click the callout center. Drag to select the callout radius and click a point to end the selection. Click to generate the detail view.
What is an aligned section?
An aligned section view / cut is a view created from a cutting profile defined from non parallel planes. In order to include in a section certain angled elements, the cutting plane may be bent so as to pass through those features. The plane and feature are then imagined to be revolved into the original plane.
What is AIP in engineering drawing?
Auxiliary Inclined Plane. AIP is placed in the first quadrant with its surface perpendicular to VP and inclined at θ to HP. The object is to be placed in the space between HP, VP and AIP. The AIP intersects the VP along the X1Y1 line. The direction of sight to project the auxiliary top view will be normal to the AIP.
What is the most important tool in technical drawing?
The technical pen is an absolute must-have when it comes to technical drawing because it is a high-precision drawing device. It can be refilled with cartridges. Technical pens are available in different widths, so the perfect one can be found for using specific stencils.
How many types of auxiliary planes are there?
Auxiliary planes are of _______ types. Explanation: These are A.V.P (Auxiliary vertical plane) and A.I.P. (Auxiliary inclined plane). Auxiliary vertical plane is perpendicular to the H.P. and inclined to the V.P. projection on an A.V.P. is called auxiliary front plane.
When the auxiliary view is hinged from the top the view is called?
An auxiliary view hinged on a front view is called a front auxiliary view. You just studied 25 terms!.
