Table of Contents
Can we create auxiliary views in 2D drawings SolidWorks?
(Drawing toolbar), or click Insert > Drawing View > Auxiliary. As you move the pointer, a preview of the view is displayed if you selected Show contents while dragging drawing view. You can also control the alignment and orientation of the view.
How do you make an auxiliary plane in SolidWorks?
To create an auxiliary view: Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). Move the pointer until the view is where you want, then click to place the view.
Can SolidWorks create 2D drawings?
You can draft in 2D in SolidWorks drawing documents using Sketch tools, Dimension tools, and Annotations as described in Creating Drawings.
How do you draw an auxiliary drawing?
To sketch an auxiliary view, you begin with orthographic. views of the object and add projection lines perpendicular (90◦) to the slanted surface, adding a reference line any convenient distance from the view with the slanted surface.
Can you dimension auxiliary views?
Normally, auxiliary views are projected from existing principal views. However, auxiliary views can also be drawn first and then used to create a principal view. This is done when a true measurement can only be obtained by an auxiliary view and that measurement is needed in order to create a principal view.
How do I get an auxiliary view?
The reference in the parent view must be perpendicular to the plane of the screen. Open a drawing. Click Layout > Auxiliary. Select an edge, axis, datum plane, or surface to create the auxiliary view from. Drag the box horizontally or vertically to the desired location.
Which is similar to an auxiliary view generally in Solidworks?
An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view.
How do I view sections in Solidworks?
(View toolbar) or View > Display > Section View.Section Views in Models Select bodies or components to include in or exclude from section views. Toggle the view off and on. Show or hide a section cap. Select the faces, edges, and vertices created by a section view.
How do I align a section line in Solidworks?
You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.
How do you create a 2D sketch in Solidworks?
To import a drawing into a part document: Open the drawing (. dwg or . In the DXF/DWG Import dialog box, select Import to a new part and click Next. On the Drawing Layer Mapping tab, edit the sheet name and click Next. On the Document Settings tab, select Import this sheet and to a 2D sketch. Click Finish.
What is 2D sketch in Solidworks?
You can create drawing geometry using 2D sketched geometry only, without reference to existing models or assemblies. When you drag a sketch point in a drawing, it snaps or infers to other sketches, drawing views, blocks, and items in the sheet format.
How do I make an assembly drawing in Solidworks?
To create a drawing from within a part or assembly document: Click Make Drawing from Part/Assembly (Standard toolbar or New flyout menu). Select options for Sheet Format/Size, then click OK. Drag views from the View Palette into the drawing sheet, and set options in the PropertyManager.
What are the six types of auxiliary view?
Auxiliary views are used to find: 1) true length of an inclined or oblique line; 2) true size and shape (TSS) of an inclined or oblique face 3) edge view of oblique face; 4) point view of inclined or oblique line; 5) true size and shape of features on incline or oblique faces.
What is the first step in constructing auxiliary drawing?
The first step in the drawing of any auxiliary view is to draw the object in normal multi-view projection, as shown in figure 5-23. A minimum of two orthographic views is necessary. The space between these views is generally greater than normal. The reason for this will become apparent.
What is auxiliary section?
AUXILIARY SECTION. — An auxiliary view maybe a sectional, rather than a surface, view. In the upper left part of figure 5-26, there is a single-view projection of a block. Fig. 5-26 Auxiliary Section.
What is the difference between partial and full auxiliary view?
Generally, the detail of the inclined surface is given in the auxiliary view. The other parts in the principal plane are ignored. Such an auxiliary view is called Partial Auxiliary View. If a complete auxiliary view is prepared, then the detail of the inclined surface does not appear fully.
Do auxiliary views have hidden lines?
Later, when you are familiar with drawing auxiliary views, omit hidden lines when they do not add needed information to the drawing. intent. An auxiliary section is simply an auxiliary view in section.
What is auxiliary view of an ellipse?
An auxiliary view is a projection on an auxil- iary plane that is parallel to an inclined sur- face (see Figure 9-2). It is a view that looks directly at the inclined surface in a direction perpendicular to it. In none of these views does the slanted surface (surface A) appear in its true shape.
What is the importance of auxiliary drawing?
Additional or auxiliary views are necessary to represent the true size and shape of other plane surfaces. A plane perpendicular to only one of the three principal planes is said to be in an inclined position; a plane not perpendicular to any of the principal planes is said to be in an oblique position.
How many types of auxiliary planes are there?
Auxiliary planes are of _______ types. Explanation: These are A.V.P (Auxiliary vertical plane) and A.I.P. (Auxiliary inclined plane). Auxiliary vertical plane is perpendicular to the H.P. and inclined to the V.P. projection on an A.V.P. is called auxiliary front plane.
