Table of Contents
(Drawing toolbar), or click Insert > Drawing View > Auxiliary. As you move the pointer, a preview of the view is displayed if you selected Show contents while dragging drawing view. You can also control the alignment and orientation of the view.
Can you do 2D drawings in SOLIDWORKS?
You can draw 2D in SOLIDWORKS, however, it should be reserved for annotations. Ideally, you should use your 3D models to create 2D drawings. SOLIDWORKS drawings comprise at least one view generated from either a part or assembly. Keep in mind, you must save the part or assembly before creating its drawing.
How do you make an auxiliary plane in SOLIDWORKS?
To create an auxiliary view: Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). Move the pointer until the view is where you want, then click to place the view.
Which is similar to an auxiliary view generally in SOLIDWORKS?
An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view.
Can you make a part from a drawing in SOLIDWORKS?
You can import a 2D drawing directly into a sketch in a part document for conversion into a 3D model. Open the drawing (. dwg or . dxf file) in SOLIDWORKS.
How do you create a 2D sketch in SolidWorks?
To import a drawing into a part document: Open the drawing (. dwg or . In the DXF/DWG Import dialog box, select Import to a new part and click Next. On the Drawing Layer Mapping tab, edit the sheet name and click Next. On the Document Settings tab, select Import this sheet and to a 2D sketch. Click Finish.
What is 2D sketch in SolidWorks?
You can create drawing geometry using 2D sketched geometry only, without reference to existing models or assemblies. When you drag a sketch point in a drawing, it snaps or infers to other sketches, drawing views, blocks, and items in the sheet format.
How do you make partial auxiliary view in Solidworks?
To create an auxiliary view: Click Auxiliary View. (Drawing toolbar), or click Insert > Drawing View > Auxiliary. Select a reference edge (not a horizontal or vertical edge, which would create a standard Projection View). Move the pointer until the view is where you want, then click to place the view.
What surface that needs an auxiliary view?
When an object has a slanted or inclined surface, it usually is not possible to show the inclined surface in an orthographic drawing without distortion. To present a more accurate description of any inclined surface, an additional view, known as an auxiliary view, is usually required.
How do I view sections in Solidworks?
(View toolbar) or View > Display > Section View.Section Views in Models Select bodies or components to include in or exclude from section views. Toggle the view off and on. Show or hide a section cap. Select the faces, edges, and vertices created by a section view.
Can you dimension auxiliary views?
Normally, auxiliary views are projected from existing principal views. However, auxiliary views can also be drawn first and then used to create a principal view. This is done when a true measurement can only be obtained by an auxiliary view and that measurement is needed in order to create a principal view.
How do I get an auxiliary view?
The reference in the parent view must be perpendicular to the plane of the screen. Open a drawing. Click Layout > Auxiliary. Select an edge, axis, datum plane, or surface to create the auxiliary view from. Drag the box horizontally or vertically to the desired location.
What is an auxiliary view CAD?
An auxiliary view is one that is projected onto a plane perpendicular to one of the orthographic views and inclined in the adjacent view. A rubber-band line perpendicular to the inclined plane helps you select the center of the new viewport.
How do you add multiple parts to a Solidworks drawing?
Under Part/Assembly to Insert, do one of the following: Ctrl + select several components from the list. Click Browse. In the dialog box, Ctrl + select several components and then click Open.
How do I make a part from assembly sketch?
Creating a Part in an Assembly Click New Part (Assembly toolbar) or Insert > Component > New Part. Type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ). Construct the part features, using the same techniques you use to build a part on its own.
How do I add a part to a drawing in Solidworks?
To insert a part: With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. Under Transfer, select any combination of items from the inserted part to be included in the derived part.
Can you convert a 3D sketch to 2D in Solidworks?
RE: convert 3D sketch to 2D sketch You cannot convert a 3D sketch into a 2D sketch, but you can create a 2D sketch from a 3D sketch.
What is required to create a new 2D sketch?
To create a sketch in a part or assembly file, do one of the following: On the 3D Model tab, click Start 2D Sketch or Start 3D Sketch . Right-click in the browser and choose New Sketch or New 3D Sketch. Click a planar face or work plane of a part and choose New Sketch.
What is the difference between 2D and 3D drawing?
2D is to display length and height information on a flat surface without depth. Although 3D is defined as 3D drawings or models, they describe objects in terms of height, width, and depth. The model contains various information about the points, lines, surfaces and entities of the product geometry.
How do you make a 2D drawing?
How to Make 2D Drawings in SketchUp Go to sketchup.google.com to download either the free or pro version of SketchUp. Open SketchUp and make sure the standard views are on your toolbar. Click on the icon in the standard view toolbar that shows the roof of the house. Begin drawing your 2D element.
How do I make an assembly drawing in Solidworks?
To create a drawing from within a part or assembly document: Click Make Drawing from Part/Assembly (Standard toolbar or New flyout menu). Select options for Sheet Format/Size, then click OK. Drag views from the View Palette into the drawing sheet, and set options in the PropertyManager.
How do I export a 2D drawing from Solidworks?
Exporting Drawings as DXF or DWG Click File > Save As. In the dialog box, for Save as type, select DXF or DWG. Click Options. Set options and click OK. In the Save As dialog box, type the file name and click Save. If the SOLIDWORKS to DXF/DWG Mapping dialog box appears, specify mapping options and click OK.
