QA

Quick Answer: Can 30.5 Draw Use 30 Arrows

What size arrows do I need for a 30 inch draw?

How to: Select the perfect arrow Bow Arrow length Draw weight lb. 25″ 30″ 15-20 700 600 20-25 700 500 25-30 700 500.

Does the length of the arrows we draw matter?

Can an arrow be too long? Most new arrow shafts measure 32 inches before being cut, so that’s about as long of an arrow as you can shoot. Depending on your draw length, such an arrow might stick out an awful lot in front of your bow at full draw, which raises issues about clearance and maneuverability.

How long should your arrows be compared to your draw length?

The best safety practice is to make sure your arrows sit at least 1″ beyond your arrow rest when the bow is at full draw. A little bit of extra arrow length gives the arrows an important margin of safety. A little too long is okay. A little too short is not.

Is draw length the same as arrow length?

Draw Length is the distance from the nock point to the throat of the grip plus 1 3/4″. Typically, this length will also be about the same length of arrow needed by the compound archer. To measure your draw length, stand with your back to a wall stretching your arms out against the wall.

What size arrows bow?

You simple take your draw length and add 0.5″ up to a maximum 1″ to determine appropriate arrow length. So if your draw length is 28″, you should get arrows with a maximum length of 29″. What this will do is give you an arrow that will be just long enough to clear the front-most part of the arrow shelf.

What does 350 arrow mean?

The numbers refer to the spine of the arrow. The different spines refer to the stiffness, a 400 spine arrow is generally for bows 40-60 lbs. 350 spine is for bows roughly 55 – 75 lbs, and a 500 spine arrow is for bows roughly 30 – 50 lbs. That number is the stiffness of the arrow, referred to as the arrow spine.

What length arrows for 28.5 draw?

If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.

How long should arrows be for 27 inch draw?

The arrow must be 29″ in length and supported by two points, which are 28″ apart. The number of inches the arrow deflects or bends due to the weight, is the spine size or measurement of an arrow. DYNAMIC spine describes the way an arrow reacts from the stored energy of a bow as it is shot.

Can arrows be too long?

The longer the arrow, the weaker the spine. So to answer your question, yes an arrow can sometimes be too long. The spine cannot be weaken by the arrow being too long – the spine is based on the deflection of a 1.98 weight hung from the middle when suspended 28″ between two points.

How long should arrows be for 29 Draw?

Registered. 29.5″ draw length with 27″ arrows and the rear of the broadhead is 1″ past my rest. I think it may depend on the bow too though. I know with my first bow I cut the arrows at 28″.

What size bow do I need?

If you’re shooting more than a 29″ draw, a 70″ bow is recommended. If you shoot more than a 27″ draw, it’s a 68″ bow. If you shoot more than a 25″ draw, it’s a 66″ bow. If you shoot less than a 25″ bow, you should consider a 64″ bow (short limbs and a 23″ riser).

Is my draw length too long?

The bow arm should move toward the target when the shot is fired. If the bow arm drops or swings to the side, the draw length is probably too long. No room is left for the bow arm to go forward, so it drops or swings to the side. There are other indicators that the draw length could be too long.

How do you know what size bow to get for archery?

First, spread your arms outward from your side to form a “T” with your palms facing forward. Next, have a friend measure your wingspan from the tips of your middle fingers. Divide this number by 2.5 and you should be relatively close to your actual draw length.

What spine of arrow do I need?

That’s why Gold Tip recommends a 400 spine for a 27-inch arrow with a 100-grain point shot from a 60-pound bow, but also recommends a 340-spine arrow if its length and draw weight stay the same, but its point weighs 150 grains. Archers selecting arrows should stick to the manufacturer’s spine recommendations.

What is a 340 spine arrow?

Aluminum and carbon-fiber combination arrows are measured by spine deflection. A smaller number means that the arrow has a stiffer spine. For example, 3-60/340 means three wraps of carbon-fiber with an aluminum core tube diameter of 60 and a spine stiffness rating of 340.

How long is an arrow?

Arrow sizes vary greatly across cultures, ranging from eighteen inches to six feet (45 cm to 150 cm). However, most modern arrows are 75 cm (30 in) to 96 cm (38 in) in length.

How are arrows measured?

Correct arrow length is measured from the bottom, inside of the nock groove (deepest point where the string goes into the nock) to the cut end of the shaft, not including the point or point insert.

Are 340 or 400 arrows heavier?

A weaker arrows is “softer”. Generally 600 arrows are for bows from 15–35 pounds in draw weight, 500 for 35–55 pounds, 400 for 55–75 pounds, and 340 for 75–95 pounds.