Table of Contents
What are considered shop drawings?
Shop drawings are produced by contractors and suppliers under their contract with the owner. The shop drawing is the manufacturer’s or the contractor’s drawn version of information shown in the construction documents. The shop drawing normally shows more detail than the construction documents.
What is shop drawing in Autocad?
Shop drawings (also known as fabrication drawings) are detailed plans that translate design intent. They provide fabricators with the information necessary to manufacture, fabricate, assemble and install all the components of a structure.
What is the difference between IFC drawings and shop drawings?
Shop drawing is a drawing that is produced by the contractor, subcontractor, manufacturer, fabricator or the supplier whereas IFC (Issued for Construction) is a type of drawing issued to the contractor by the client or his/her representative. Drawings are the cornerstone of every construction.
What is the difference between shop drawings and fabrication drawings?
As-built drawings can be made for the whole building as well as for specific components. But the shop drawings are only made for the different components of a building.
Are shop drawings considered design?
Shop drawings (also known as fabrication drawings) are detailed plans that translate design intent. With the help of shop drawings, you will be able to figure out the kind of materials you will require for the components, the dimensions of the proposed installations, and the timelines.
Are shop drawings and submittals the same thing?
The shop drawing process formalizes the method for a contractor to demonstrate how it will accomplish these design obligations. The submittal process forces the contractor to show how it intends to execute the work and allows the design professional to review those intentions for com- pliance with the design intent.
Do shop drawings supersede contract drawings?
The fabricator’s drawings are then given to “the shop” for use in making the component – thus the name “shop drawing.” As one court stated, “shop drawings are the final word as to how the work should proceed on the job, and supersede the architectural plans.”Jan 6, 2020.
What are mechanical shop drawings?
Mechanical Shop Drawing They represent enhanced specifications for installing and fabricating ducts, custom piping connections, and air-handling units. The mechanical shop drawings represent transportation systems such as lifts and escalators, infrastructural elements, and at times industrial machine components.
What are the 6 types of construction drawings?
What Are the Six Types of Construction Drawings? Plans. Interior and exterior elevations. Building and wall sections. Interior and exterior details. Schedules and room finishes. Framing and utility plans.
How do you make a shop drawing?
2.1 PREPARATION OF SHOP DRAWINGS Shop drawings are prepared following a review of the drawings, specifications and contract documents supplied by the registered professional of record – and other project consultants as may be applicable – and the resolution of any inconsistencies or requested changes.
What are AFC drawings?
An Approved for Construction (AFC) means that the document or drawing was reviewed and approved by authorities of internal and external organisations including the client representatives for the construction.
Do shop drawings need to be stamped?
Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What is steel shop drawings?
Shop drawings are typically a set of drawings required for prefabricated components. These drawings are usually produced by the fabricator, manufacturer, contractor or supplier. Shop drawing includes dimensions, manufacturing standards, fabrication. They contain more details compared to construction documents.
What is included in structural drawings?
Structural drawing A structural drawing, a type of engineering drawing, is a plan or set of plans and details for how a building or other structure will be built. The structural drawings set has different subsets: General Notes, Plans, Elevations, Sections, and Details.
What are the different types of construction drawings?
Here are 12 types of construction drawings that a construction project might need: Site plan. A site plan provides a map of the construction site. Plot plans. Excavation plans. Floor plan. Elevation drawings. Section drawings. Detail drawings. Mechanical and electrical drawings.
What is the difference between product data and shop drawings?
1: “Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor…” 3.12. 2: “Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor…”May 12, 2006.
Are shop drawings contract documents?
Shop Drawings—All drawings, diagrams, illustrations, schedules, and other data or information that are specifically prepared or assembled by or for Contractor and submitted by Contractor to illustrate some portion of the Work. Shop Drawings, whether approved or not, are not Drawings and are not Contract Documents.
Why are shop drawing submittals required?
Submittals in construction management are shop drawings, material data, samples, and product data. Submittals are required primarily for the architect and engineer to verify that the correct products will be installed on the project.
What are the three types of submittals?
Submittals can be categorized as follows: Preconstruction Submittals. Construction Submittals. Closeout and Maintenance Submittals.
Do architects need to approve sub contractor shop drawings?
Under sections 3.12. 6 and 3.12. 7 of AIA A201 , the contractor must review and approve shop drawings before sending them to the architect or engineer. The contractor’s approval stamp is the contractor’s representation that he or she fulfilled this responsibility.
Who is responsible for reviewing shop drawings?
The structure representative or a civil engineer registered in the State of California must review the shop drawings for adequacy and compliance with all contract requirements and all requirements in this manual. An engineering analysis must be performed, see Section 2-4.03, Engineering Analysis.
Does the architect need to approve the subcontractor’s shop drawings?
The architect will rarely have any obligation to approve a sub-contractor’s shop drawings unless the sub-contractor has a design obligation or the contract documents expressly require the architect to approve such drawings.
What is shop drawing in HVAC?
HVAC DUCT SHOP DRAWING Ducting shop drawings provide the mechanical contractors and fabricators with detailed information on how the ducts and equipment are placed in the building.
What are plumbing shop drawings?
Plumbing shop drawings are technical drawings of fresh water supply pipes as well as solid and liquid water waste pipes with pipe dimensions, plumbing fixtures marked with appropriate color coding. Plumbing shops are part of our core MEP engineering services offered to plumbing contractors and fabricators.
What is MEP shop drawings?
An MEP shop drawing is the drawn version of the information in the construction documents. It includes dimensions, manufacturing standards, fabrication and contains more details compared to construction documents.
