Table of Contents
Can you buy replacement drawer fronts?
The BELLA range of Replacement Drawer Fronts is available in the same 24 designs and 35 colour options as the kitchen doors. These top quality, vinyl wrapped MDF replacement kitchen drawer fronts are made to order in standard sizes at affordable prices and can be made-to-measure for no additional cost.
Can you change cabinet doors to drawers?
It’s relatively easy to convert a cabinet from doors to drawers. You just have to mind the specs of the particular hardware you’re using, as well as allow for how your cabinets are made.
What are cabinet drawer fronts made of?
Inset panel drawer fronts will use a real wood plywood or MDF depending on which material you select. The drawer fronts come highly sanded and ready to paint or stain directly out of the box no prep necessary.
What is the front of a cabinet drawer called?
Drawer Face The front piece that is attached to the drawer box. Can also be called the drawer front.
What is a drawer front?
Drawer fronts are the cousin to your cabinet doors. If and when you decide to add replacement cabinet doors to your kitchen, bath, or office, you’ll need to add replacement drawer fronts as well.
What is cabinet refacing?
Refacing cabinets improves the look and feel of your home in less time than a full remodel. During your cabinet refacing project, your existing cabinet doors and drawer fronts will be replaced with high-quality veneer materials, while the structure of your cabinetry remains.
How thick are drawer fronts?
Drawer Basics In general, the drawer front should be 3⁄4” thick – unless it’s a drawer with a “false front.” False-front drawers are a simple drawer box with the front screwed to the box. It’s a handy way to fit drawer fronts in projects where the drawers run on metal slides.
What are the different cabinet styles?
As far as we’re concerned, these are the only six cabinet styles you need to know: glass-front, Shaker-style, beadboard, flat-front, plywood, and natural (that is, unfinished) wood.
What are the sides of cabinets called?
End Panel – The side of the cabinet that is grooved into the face frame and extends back to the wall. Bottom – The floor of the cabinet. On a wall and tall cabinet, the same component is used as the top. Back – The rear vertical surface used to mount the cabinet to the wall.
What are cabinet Stiles?
A stile is a piece of wood that is aligned vertically in a cabinet’s frame. Stiles and rails, which are horizontal pieces, are combined to create a complete cabinet frame. A stile may also refer to the vertical piece of wood that is placed in the opening of a cabinet.
Is MDF good for drawer fronts?
When it comes to Conestoga’s cabinets, the only place you may need to consider using MDF is in the cabinet door/drawer fronts when you are planning on painted cabinetry. When you paint solid wood and the wood then expands and contracts, the result is unavoidably telegraphed to the paints surface.
Why are there fake drawers?
Fake drawer fronts are used to continue the visual line created by other drawers or cabinet openings. They are often placed in areas in which a drawer would not be appropriate, such as directly under sinks.
What are the different types of drawer slides?
There are 6 types of Drawer slides: Ball Bearing Drawer Slides. Soft close Ball Bearing Drawer Slides. Under mount Drawer Slides. Side Mount Drawer Slides. Center Mount Drawer slides. Roller Slides.
What are 5 piece drawer fronts?
If you’re wondering, “What is a 5 piece drawer front?” the answer is quite simple. A 5 piece drawer front consists of a 4 piece frame around a center panel. The center panel can be raised or recessed, with or without a pattern, while the frame can come in a variety of styles, similar to a picture frame.
What is the difference between refacing and resurfacing cabinets?
Refacing is like getting new cabinets. Whereas resurfacing basically freshens up your cabinets, refacing gives you completely new components. Since the cabinet fronts and doors will be replaced, you have the freedom to choose any new door design, finish, and material that you want.
What is the difference between refacing and refinishing kitchen cabinets?
As mentioned above, when you are refacing your cabinets, you are putting new material on top of the existing cabinet frames and replacing doors and drawer fronts. When refinishing cabinets, all you are doing is changing the finish, or color, of the existing materials.
Is it cheaper to reface or replace cabinets?
Refacing is about 40 to 50-percent less than replacement. Expect to pay about $12,000 to $20,000 for contractor-grade cabinets. Best when the cabinet boxes are in solid shape and cost is an issue. Best when doing a whole-kitchen remodel or when cabinet boxes are in poor shape.
How do you reface kitchen drawers?
In a nutshell, here’s how to reface cabinets: Remove the doors and drawers and cover the front edges of the cabinets with peel-and-stick wood veneer. Hang the new doors with easy-to-adjust, easy-to-install cup hinges. Attach new drawer fronts to your existing drawers.
Can you replace kitchen drawers?
To get a replacement that will work you will either need to build a replacement, have a friend do it, or order a drawer box from a professional. Custom made cheap replacement cabinet drawers can be made in your choice of material, using either dovetail joints or dowel joints, in exactly the size you need.
What wood is used for drawer fronts?
Poplar is a great all-around choice for drawer box construction. It is stable, durable, and much less expensive than most hardwoods. The color of poplar heartwood ranges from a creamy white to a yellowish tan or brown. It is very easy to work with and has straight, uniform grain.
How much gap should be between drawer fronts?
Drawer depth or height is not critical, but the most common difference between the drawer and the opening is 3/4 inch. For example, if the opening measures 4 inches vertically, the drawer should be built 3 1/4 inches. This allows 1/4 inch at the bottom where the slide is attached, and 1/2 inch at the top for clearance.
