Table of Contents
Should you cover your swamp cooler?
After cleaning your system thoroughly, you should cover your cooler with some kind of protective cover. Protective covers keep winter dust from getting into the motor and air ducts so when you turn your system on in the spring you don’t get all that dust into your home.
Should I shade my swamp cooler?
You’re going to get better cooling action without having the added evaporation of all of that direct sunlight on the water. So, it’s a good idea to shade those units when it’s physically possible to do that. And you’re right: it’s known both as a swamp cooler and an evaporative cooler. So it works better in the shade.
How can I make my swamp cooler more efficient?
10 Tips to Make Your Swamp Cooler Colder and More Efficient Use Your Swamp Cooler in a Dry Climate. Use Your Swamp Cooler Seasonally. Open the Windows. Run a Dehumidifier. Cultivate a Green Thumb. Experiment With Positioning. Prime the Pads First. Use Cold Water.
How do you prevent calcium build up in a swamp cooler?
Regular Maintenance Use Quality Pads. The quality of cooler pads you use on your evaporative cooling unit determines your coolant’s ability to prevent deposit accumulation. Clean the Cooler Regularly. Add a Bleed-Off Valve. Shut the Evaporative Cooler.
Can I run my swamp cooler all day?
You can run your swamp cooler all day should you so choose without seriously increasing your monthly utility bill. However, you will need to be available to refill the reservoir in the interim. Should you not want to do that, run your swamp cooler first thing in the morning or overnight to fill your home with cool air.
At what humidity does a swamp cooler stop working?
Swamp coolers work in humidity up to about 70 percent. However, you may begin to feel muggy before the air reaches this saturation with or without a swamp cooler.
Do swamp coolers work over 100 degrees?
Here’s the deal: your swamp cooler will only cool your home by about 10 degrees. In addition, it will struggle immensely, and likely will not work at all, when its humid outside. However, it will do a better job of cooling, and in humid weather your refrigerated air system will cool and dehumidify.
How do you un winterize a swamp cooler?
Learn about de-winterizing your swamp cooler below! Dust It Off. First, you’re going to want to get it clean so that it’s in shape for the rest of the season. Change the Pads. Connect the Water Line. Call in Professionals.
How do you prepare a swamp cooler for the summer?
The following steps will help you prepare your swamp cooler for the summer: Take the sides off of the swamp cooler. Clean the swamp cooler. Inspect the swamp cooler rotating belt. Clean the swamp cooler water pan. Ensure the swamp cooler water pump and motor are working properly. Clear the surrounding area of any debris.
How do you drain a swamp cooler for winter?
5 Easy Steps to Winterize Your Swamp Cooler Unplug the unit, cutting off the power supply. Turn off the water supply valve connected to the cooler and leave off until turning the unit back on in the spring. Drain the cooler. Change the cooler pads now, rather than in the spring.
How many windows should be open for a swamp cooler?
Open the windows or vents on the leeward side of the house to provide 1 to 2 square feet of opening for each 1,000 cfm of cooling capacity.
Should you open windows with a swamp cooler?
Adjusting the air flow You can attain balanced air flow by installing ducts in each room or opening windows when the cooler is in use. A window should be open just enough to allow air pressure inside a room to slowly and quietly close the door to that room.
Why is my swamp cooler not getting cold?
Probably the single most common reason your swamp cooler is not blowing cold air is that the circuit breaker has tripped or the fuse has blown. Another possibility when your cooling unit isn’t blowing cold air is that you have a problem with either the fan motor or the belt.
Can you put fabric softener in a swamp cooler?
Put a capful of fabric softener in the cooler water at least once a week to help soften the water, or purchase products specifically for this at your local hardware store. Make sure you have enough air flow into the house to keep the cooler motor from overworking by opening several windows.
Can I run vinegar through a swamp cooler?
Clean. Add a cup of vinegar to the cooler pan and let the vinegar cycle through the system for up to an hour. This will eliminate odors, mold, mildew and some corrosion, calcium deposits and other types of build-up.
How do I prevent hard water in my swamp cooler?
In-line water filters remove minerals from hard water before they get to your cooler’s pan. This prevents scale buildup at the source, which is much easier than removing hard water deposits on the pads or pan. Inline filters can be installed anywhere on a water line before the evaporative cooler.
How do you make a cooler cover?
Step 1: Wrap Reflectix Around Cooler and Cut To Size. Step 2: Make Note of Vents and Cut Out Vents. Step 3: Tape Outside Reflectix Together Leaving Space For Lid To Come On/Off. Step 4: Cut Off The Excess. Step 5: Cut Reflectix Piece For Lid. Step 6: Cut a Slit In Side So You Can Fold and Tape Lid. Step 7: Tape Lid Corners.
At what temperature do swamp coolers stop working?
A wet bulb temperature above 70 degrees Fahrenheit (21 degrees Celsius) means the swamp cooler won’t be able to adjust the temperature enough to keep it in the comfort zone. (This varies based on humidity, personal preference and activity, but it generally falls in the low 70s.).
Is it OK to leave a swamp cooler on all night?
During the hottest part of the day, it is not ideal to run your swamp cooler. You will only be able to lower the temperature to a certain extent. But, if it is exceptionally hot outside, running the swamp cooler will be absolutely essential for comfort. Evening hours are a great time to run the swamp cooler.
When should I turn off my swamp cooler?
Typically, you should start thinking about turning off your swamp cooler and turning on your furnace when the nights drop below 50° and days are in the low 70°’s.
Is my swamp cooler making me sick?
A well-maintained unit won’t make you sick. The key is maintenance. Your cooler should get fresh water every three to four weeks to prevent stagnation and bad odors.
Can a swamp cooler cool an entire house?
MasterCool 7000 CFM 115V 2 Speed Down Draft 12″ Media Evaporative Cooler. This powerful evaporative cooler can cool up to 2,200 square feet of living space. Like all whole-house swamp coolers, the MasterCool 7000 CFM is hooked up to a continuous water source to maintain water levels.
