Table of Contents
Can you use an autocal on multiple trucks?
The autocal can do up to 5 trucks FYI.
Can EFI LIVE be used on multiple vehicles?
After you have used your first 2 licenses, you can purchase additional licenses for $99 to tune additional vehicles. FlashScan V2 has the ability to license up to 221 supported vehicles per interface.
What can you do with an autocal?
More than just a ‘generic handheld’, AutoCal delivers EFILive’s renowned scan tool to the tuner’s customer, allowing for the collection and transmission of logged data back to the tuner for analysis. The tuner has the ability to update and optimize the original tune or send new tunes via email.
How do I add my VIN to autocal?
Click the [F7: Licenses] button in the left-hand pane. Click the [F3: VINs] button in the left-hand pane. Paste the Activation Code and enter the License number from your email. Select [Activate VIN License] to add the licenses to the device.
How many tunes can an AutoCal hold?
You can have more than one tune on your AutoCal ready to load/switch tunes, if the tuner does ctz files you could have up to 4 different tunes on one AutoCal.
What is V3 AutoCal?
SKU: EFILive V3 Autocal. The EFILive V3 Autocal is a scan tool for GM and Cummins vehicles. It also supports module flashing. Tuning is not included. This is only a scan tool used for diagnostic purposes.
What is the difference between FlashScan and AutoCal?
With FlashScan V2, end users have the ability to create, view, and modify tunes. AutoCal is limited to flashing tunes provided by a single tuner. FlashScan is required to create tunes for an AutoCal device. AutoCal devices cannot create tunes.
Can you tune multiple trucks with one tuner?
Yes, you may return to stock and tune a different vehicle up to 5 times. In order to tune multiple vehicles simultaneously, you will need a device per vehicle.
Can you switch tunes with AutoCal?
Differences between FlashScan and AutoCal AutoCal cannot be used to create or change tune files.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
What is EFILive AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. It allows the tuner to update and optimize the original tune without shipping and/or removing controllers from customers’ vehicles.
How can I get EFILive?
Turn on the truck key. Turn on PC and start up the EFILive Scan tool program. Click on the “connect” option in the EFILive program. Select the parameters (PID’s) you want to scan, then start to monitor or record the data on the PC.
Is EFILive Vin locked?
Your tune is vin locked. If you keep the autocal you can just buy another Vin license and buy updated tunes if you decide to use Ryan’s tunes on the new truck.
Can EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
How do you read codes in AutoCal?
Registered. Plug it into the OBDII port, turn your ignition on – 2 clicks – scroll down to read DTC and press ok. It will list all your codes.
What does a DSP 5 switch do?
The CSP5 and DSP5 switches allows users to switch on the fly between 5 user defined tunes. With the DSP5 switch, you can change your tuning “on-the-fly”. Tuning not included, you must have DSP5 Tuning for use with this switch.
How do I connect FlashScan to AutoCal?
Remote Link AutoCal Connect your FlashScan device to your PC. Start the EFILive V8 Scan and Tune application. Open the Control Panel. Select the [F7: Licensing] option. Select [Link]. Click on the drop down of [Link] button and select [Generate Remote-Link Code]. Enter the serial number of the AutoCal to be linked.
What does EFI Live do for Duramax?
EFILive is a tuning tool that allows you to electronically crack open the stock ECU and TCM in ’01-to-current Chevys and GMCs, and ’06-to-’09 Cummins-powered Rams and access and adjust the data. Many street trucks rely on EFILive software for everything from tow tunes on up.
How do you Unmarry a tuner?
How do I Unmarry my SCT X4 tuner? From the main menu, choose “Program Vehicle”. From the menu, choose the “Return” option. Follow the instructions on the device to move the key to the “on” position, causing the device to flash, and then select “Continue” to confirm the vehicle’s return to stock status.
Can you reuse Superchips programmer?
You can use it on different vehicles but only one at a time. If you have one programmed and want to program the other, the first on has to be returned to stock first!.
How do I Unmarry SCT livewire TS?
Open the Device Updater on your Windows computer. Plug the device in and then click on “Automatically Check for Updates.” This option will appear on your PC, not the device itself. Once the update has finished your device is unlocked and ready to be used again. NOTE: The unlock must be done using a Windows PC.
What are the 5 tunes on EFI live?
It includes 5 custom tunes for a DSP5 switch so that you can switch between tunes while driving. Our tunes are opt.stock, tow (w/ turbo braking), street, hot and race. Please specify in the stated area if you want any other specific tunes.
