Table of Contents
Change command line settings via the User Interface: Open the Customize Interface dialogue. Either: Enter CUI at the command line. Select the current workspace. In the Workspace Contents pane, select Palettes then select Command Line. In the Properties pane, set Show to Yes and Orientation to Bottom. Confirm with OK.
How do I change line properties in AutoCAD?
Select the objects. Right-click in the drawing area, and choose Properties from the shortcut menu. In the Properties Inspector, click Linetype, and then the down arrow. From the drop-down list, choose the linetype that you want to assign to the objects.
How do I change the size of the command line in AutoCAD?
Solution: Hover cursor over top of command line box until a double headed arrow appears, click and drag up or down to desired size.
How do I get the command line back in AutoCAD?
Most of the time it is as simple as turning the Command Line back on. 1.) If your command line is off hold down the “Ctrl” button and while stilling holding this down select the “9” key on the Keyboard this should turn the Command Line back on.
What does Ltscale do in AutoCAD?
The LTSCALE system variable is used to control the global linetype scale factor in the drawing. Changing this scale factor, the appearance of linetypes in the drawing also changes. For example, an LTSCALE setting of 1 means that the dash length specified in the linetype definition is read directly as drawing units.
How do I change the line width in AutoCAD 2020?
To Set the Current Lineweight Click Home tab Properties panel Lineweight. Find. In the Lineweight drop-down list, choose Lineweight Settings. In the Lineweight Settings dialog box, choose a lineweight.
How do I change the command bar in Autocad?
Do the following: Open CUI editor by typing CUI command line. Go to the Customize tab and Expand Workspaces. Select the affected workspace. In the right panel, expand Palettes and click on Command Line. Move to the Properties below and change Orientation to Bottom (or other position other than Floating).
How do I dock the command line in Autocad 2020?
Drag the command window to dock or undock. The command window is docked by default for certain operating systems and Windows themes.
How do I change the ribbon size in Autocad?
You can control the size of the toolbar buttons and and ribbon icons in the Options dialog box. At the command prompt enter OPTIONS.Windows XP: Right-click the desktop and choose Properties. Click the Appearance tab. Change the “Font size” menu. Click OK.
How do I show the command bar in AutoCAD 2021?
Do one of the following: At the top-left of the application window, on the right end of the Quick Access toolbar, click the drop-down menu Show Menu Bar. At the Command prompt, enter MENUBAR. Enter 1 to display the menu bar.
Where is line command in AutoCAD?
Line Command Open the AutoCAD software. Select the Line icon from the ribbon panel or type L or Line and press Enter on the command line. Specify the starting point and endpoint using the cursor on the workspace or drawing area, as shown in the below image: Press Enter or Esc to exit.
How do I set Ltscale and Psltscale in AutoCAD?
To set the linetype scale at the keyboard, follow these steps: Type LTSCALE (or LTS) and press Enter. AutoCAD responds with a prompt, asking you for the scale factor. Type the value you want for the linetype scale and press Enter. The easiest choice is to set the linetype scale to the drawing scale factor.
What is Visretain in AutoCAD?
This system variable controls whether the changes made to XREFs are retained or are only temporal. If the variable is set to 1, the changes are kept, if we set it to 0, reloading the XREF will bring back the original colors.
How do you change the line thickness in AutoCAD 2021?
To Set the Thickness of New Objects Make sure no objects are selected. If the Properties palette is not displayed, click View tab Palettes Properties. Find. In the Properties window, under General, enter the value for Thickness. When new objects are created, they have the specified 3D thickness.
How do I change the default line thickness in AutoCAD?
The DEFAULT value is set by the LWDEFAULT system variable, which has an initial value of 0.01 inches or 0.25 mm. All new layers use the default setting. The lineweight value of 0 plots at the thinnest lineweight available on the specified plotting device and is displayed at one pixel wide in model space.
How do you change the line thickness in AutoCAD 2022?
To Set the Current Lineweight Click Home tab Properties panel Lineweight. Find. In the Lineweight drop-down list, choose Lineweight Settings. In the Lineweight Settings dialog box, choose a lineweight.
What is AutoCAD command line?
The command line is where you will see instructions and options when using commands. For example, on the Home ribbon, in the Draw panel, click the Line tool. On the command line, the program prompts you to specify the first point of the line. Once you click to pick that point, the prompt changes.
How do you show lines in AutoCAD?
On the command line in AutoCAD, type LWDISPLAY and set the value to On (or 1). Alternatively, use the Show/Hide Lineweight button that can be added to the status bar.
How do I move the command line in AutoCAD 2019?
You can resize the command window vertically by dragging the splitter bar, which is located on the top or the bottom edge of the window. Resize the window horizontally by dragging the right or left edge.
How do I dock the command line in AutoCAD 2018?
A docked command window is the same width as the application window. It is displayed in a fixed location above or below the drawing area. You can undock a command window by double-clicking it. You can dock it by dragging it to the top or bottom edge of the drawing area.
How do I dock a text window in AutoCAD?
If the command window is docked or closed: Press F2. If the command window is not docked or closed: Press Ctrl+F2.
How do I undock command line in AutoCAD?
To collapse the command line (like other palettes such as the Properties window or the Tool Palettes), first undock it by dragging its gray title bar at the left. Then right-click the gray title bar and choose Auto-Hide. The command line palette collapses to a small gray bar.
How do I change the ribbon in AutoCAD?
Right-click Tabs and click New Tab. A new ribbon tab (named New Tab) is placed at the bottom of the Tabs node. Right-click New Tab. Click Rename and enter a new name for the ribbon tab.
