Table of Contents
How do I know what tunes I have on my EFI live?
If you have the ability to find out who the prior owner is you can contact him and find out who tuned the truck. Then call the tuner and provide the VIN and they can tell you what tune they sold. You could also call the major tuners and see it they have a record of tuning that VIN.
Can you switch tunes with AutoCal?
You’ll have to buy a new autocal. Your current one is licensed to the v2 that tuned it.
How do you read codes in AutoCal?
Registered. Plug it into the OBDII port, turn your ignition on – 2 clicks – scroll down to read DTC and press ok. It will list all your codes.
What are the 5 tunes on EFI live?
It includes 5 custom tunes for a DSP5 switch so that you can switch between tunes while driving. Our tunes are opt.stock, tow (w/ turbo braking), street, hot and race. Please specify in the stated area if you want any other specific tunes.
Does EFI Live come with tunes?
Premium Member. EFILive is just a software that takes the ECM parameters and enables “you” or a “tuner”(person that manipulates the parameters) to change them and flash them back into the ECM. EFILive does not build performance tunes or even tune them selfs. The only provide the software.
How much HP does EFI Live add?
A basic tune to add 100 hp or so can be accomplished by changing only five or six tables in the engine’s software calibration. Where EFILive really shines is tuning a modified truck to run like a stocker.
Can EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
What is EFI Live AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. And for their customers to collect and submit logged data back to the tuner for analysis.
How do you clear codes on a Duramax?
With the Dodge trucks you can disconnect both batteries, both cables. Then hold the positive and negative cable together off one of the batteries for 10 seconds. This will completly drain the system and clear any codes that it may have. It should work the same with a Duramax.
Will EFI Live delete EGR?
You’ll need efi live for a full EGR delete.
What is shift on the fly tuning?
Edges all-new EAS Shift-On-The-Fly (SOTF) allows you to change custom tunes* on the fly utilizing the Insight CS2 or CTS2. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.
Can you switch EFI live on the fly?
The CSP5 Switch mounts inside your 2006-2018 Dodge 6.7L Cummins and allows you to switch your EFILive CSP5 Tuning “on-the-fly”. By adding the CSP5 switch to your EFI Live tuned Cummins, you can change tunes on the fly.
How do I retune my EFI live?
Make sure to have EFI Live Scan and Tune installed. Plug in your AutoCal. Open EFI Live Scan and Tune. On the left hand side, click on F7: Licenses. A new window will open. Enter the Activation Code provided in your email from us. Change the License Number to match what was sent in your email.
Do tuners help gas mileage?
The short answer is “yes,” but a longer explanation is in order. While manufacturers of aftermarket performance products claim tuners can add 3-4 mpg, the actual savings, if any, largely depends on how and where you drive. By definition, performance products are designed to increase engine output.
Who makes the best tunes for 6.7 Cummins?
Best Diesel Tuner For 6.7 Cummins (2020 Update) BEST BUDGET CUSTOM TUNER: SCT X4. BEST PLUG & PLAY TUNER: Banks Derringer. BEST CUSTOM TUNER: EZLynk Tuner with GDP Tunes. BEST MONITOR-ONLY: Edge Insight CTS3. Bully Dog BDX.
How much HP does EFI Live Add LBZ?
2006-2007 GMC/Chevy LBZ Duramax 6.6L Tuning | EFILive. Gain 150+ HP over stock, tow your toys effortlessly, and rapidly increase acceleration. Tuning engineered for optimal efficiency.
What does EFI Live do for Cummins?
The EFI Live system is a tool that allows you to electronically crack open the OE ECU & TCM in your Cummins and allows you to overwrite the stock files with upgraded tunes. This specific EFI Live will include Coopers Custom Solutions tuning with either a single tune or 5 tunes.
What is a CSP switch?
CSP split-core current switches have either normally-open (NO) or normally-closed (NC) output configurations. These switches are ideal for retrofit or existing installations since it is not necessary to power down the unit and disconnect any wires during the installation process.
Does EFI Live work on Mac?
No it does not. You would have to boot windows through your mac with parallels or something of that nature.
How do I connect FlashScan to AutoCal?
Remote Link AutoCal Connect your FlashScan device to your PC. Start the EFILive V8 Scan and Tune application. Open the Control Panel. Select the [F7: Licensing] option. Select [Link]. Click on the drop down of [Link] button and select [Generate Remote-Link Code]. Enter the serial number of the AutoCal to be linked.
How do I update my autocal v2 firmware?
Click the [Check Firmware] button. Boot Block and Firmware versions, along with Configuration files are displayed. If a boot block update is available then the [Update Boot Block] button will be visible. You should click that button to update the firmware in the connected device.
