Table of Contents
All PPEI Products sold include ONLY emissions compliant tuning options. Finally, EFILive tuning for the 2010-2012 6.7L Cummins with pre-loaded dyno proven tunes to avoid the guesswork. As part of the PPEI EFILive program, you will receive a preloaded EFILive AutoCal ready to load in your truck.
Who makes the best tunes for 6.7 Cummins?
Best Diesel Tuner For 6.7 Cummins (2020 Update) BEST BUDGET CUSTOM TUNER: SCT X4. BEST PLUG & PLAY TUNER: Banks Derringer. BEST CUSTOM TUNER: EZLynk Tuner with GDP Tunes. BEST MONITOR-ONLY: Edge Insight CTS3. Bully Dog BDX.
Can you switch tunes with autocal?
You’ll have to buy a new autocal. Your current one is licensed to the v2 that tuned it.
Can you delete a 6.7 Cummins without a tuner?
You should be fine driving it to the shop deleted. The 2012’s don’t usually have any issues going into limp mode running deleted without tuning.
How much HP does a tuned 6.7 Cummins have?
The new high-output engine boasts 420 hp and 1,075 lb-ft of best-in-class torque. For RAM 2500 and 3500 (equipped with a 68RFE Auto) HP and torque have increased to 370 hp and 850 lb-ft to provide the right power for these models. Your vehicle is equipped with an engine oil change indicator system.
What is EFI Live AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. And for their customers to collect and submit logged data back to the tuner for analysis.
Can EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
Does EFI Live come with tunes?
Premium Member. EFILive is just a software that takes the ECM parameters and enables “you” or a “tuner”(person that manipulates the parameters) to change them and flash them back into the ECM. EFILive does not build performance tunes or even tune them selfs. The only provide the software.
What are the 5 tunes on EFI live?
It includes 5 custom tunes for a DSP5 switch so that you can switch between tunes while driving. Our tunes are opt.stock, tow (w/ turbo braking), street, hot and race. Please specify in the stated area if you want any other specific tunes.
Is it worth deleting 6.7 Cummins?
To put it bluntly, no, you should not remove the emissions equipment from any diesel pickup. Removing emissions equipment also voids the vehicle’s factory warranty. And before you say it, there is no way to keep a dealer from knowing that emissions equipment was removed.
How long will a deleted 6.7 Cummins last?
If you are responsible and take it easy, you will not have problems. I put 40,000 miles on my ’08 6.7 deleted, 30,000 miles on a ’10 Ford PSD delted and 15,000 miles on my ’10 Dodge deleted. No problems with any of them. The only problems I had was with the ’08 before I deleted.
Is it legal to delete def?
If you’re looking, it’s not hard to find someone who’ll modify or remove the Diesel Exhaust Fluid (or DEF) emissions systems on your farm equipment. In the U.S., the EPA Clean Air Act prohibits anyone from tampering with an emission control device on a motor vehicle by removing it or making it inoperable.
What are the problems with the 6.7 Cummins?
A few issues that may occur with the 6.7 Cummins turbo include: Leaking oil seals. Worn bearings (too much shaft play) Sticking VGT parts.Dodge, Ram 6.7 Diesel Turbo Failure Symptoms Slow spool. Poor performance. Excessive smoke from exhaust. Whining sounds.
How much can a 6.7 Cummins tow?
The standard 370-horsepower 6.7-liter Cummins® Turbo Diesel will tow 22,670 pounds of cargo with a maximum payload of 6,840 pounds.
How much boost can a stock 6.7 Cummins handle?
The stock head bolts should be good up to about 45psi back pressure, and 38 psi boost.
What is the difference between FlashScan and AutoCal?
With FlashScan V2, end users have the ability to create, view, and modify tunes. AutoCal is limited to flashing tunes provided by a single tuner. FlashScan is required to create tunes for an AutoCal device. AutoCal devices cannot create tunes.
What is AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. It allows the tuner to update and optimize the original tune without shipping and/or removing controllers from customers’ vehicles.
How do I add my VIN to AutoCal?
Click the [F7: Licenses] button in the left-hand pane. Click the [F3: VINs] button in the left-hand pane. Paste the Activation Code and enter the License number from your email. Select [Activate VIN License] to add the licenses to the device.
What is a DSP5 switch?
The CSP5 and DSP5 switches allows users to switch on the fly between 5 user defined tunes. With the DSP5 switch, you can change your tuning “on-the-fly”. Tuning not included, you must have DSP5 Tuning for use with this switch.
How do you clear codes on a Duramax?
With the Dodge trucks you can disconnect both batteries, both cables. Then hold the positive and negative cable together off one of the batteries for 10 seconds. This will completly drain the system and clear any codes that it may have. It should work the same with a Duramax.
How do you clear the code on EFI live?
Clearing Trouble Codes Turn your key in the “On” position (Not Running) Plug your SPADE into your OBD2 port. Scroll down to the Trouble Code option and press OK. Scroll down to Clear DTC’s and press OK. Press OK when you are asked if you are sure.
