Table of Contents
Richly saturated ArtResin Alcohol Inks are formulated especially for use with ArtResin Epoxy Resin. Perfect for creating “petri” coasters in a Silicone Mold – simply squeeze alcohol ink drops into mixed ArtResin epoxy resin and follow with our white Ink Sinker to push the color through the resin.
Can you use ink in resin?
You can mix a little alcohol ink into your resin for transparent color, but results vary, and if you add too much it will affect resin set-up.
Can you use acrylic ink in resin?
Inks – india ink, acrylic ink and alcohol ink. Alcohol is a solvent and is used for resin clean up so use alcohol inks sparingly with resin. Acrylic inks on the other hand have vibrant colors, and are really the thinnest form of acrylic paint. They should perform well in resin.
What can I use to color resin?
What are some things you can try to use to color resin? Acrylic paints. Go with no more than one part paint to ten parts mixed resin. Alcohol based colors. Note: Some alcohol colors will not keep their color in resin. Powders such as micas and eyeshadows. Glitters. Kitchen spices. Sidewalk chalk. Water color paints.
Can I use alcohol inks in resin?
Yes, this is possible. Simply add a few drops of alcohol ink after mixing the resin and hardener. Basically, Alcohol Inks are even better than some other options for coloring the resin, because the transparency of the material can be kept as far as possible despite the coloring.
What is the best alcohol ink for epoxy resin?
1. Rupert, Gibbon & Spider Jacquard Color Alcohol Ink. These inks cover all bases. Highly pigmented, fast drying, and cost effective, they will serve you well no matter the project—use them on glass, ceramic, resin, Yupo paper, and more.
Can you use acrylic paint to color resin?
Acrylic paint can also be used to dye resin. Usually, a higher quality paint will produce better results. The casting on the left is colored with a shimmer “color shift” paint and the one on the right is regular. They both take the color well, and the shimmer finish on the left is quite pretty.
Can you use pigment powder in resin?
Sprinkle a little powder pigment on top of your mixed cup of resin and stir. Go with less than what you think you need as you can always add more. Use a kitchen measuring spoon if necessary (or lay off the coffee that morning LOL). This mixing cup contains 1/2 ounce of resin.
Can you use food Colouring in epoxy resin?
Resin can be purchased in a variety of colors, but as with anything, makers have begun to experiment with other methods of coloring, including using dyes intended for food. But don’t be fooled: Even if you can add food coloring to it, resin is still toxic!Jan 15, 2021.
What kind of paint do you use on resin?
What Kind of Paint to use on Resin. The best paint to use on the resin is acrylic paint. First, make sure to prime the surface, then paint with acrylic paint. The paint for resin will adhere to the surface, you can also spray a finish to make your project last longer.
Can you mix acrylic ink with epoxy?
Mixing paints and acrylics with epoxy is not recommended. So acrylic-based, water-based and even some oddly blended oil-based pigments don’t mix well. They can get clumpy and even leave a weird film on the finished product.
Can I use eyeshadow to color resin?
Using eyeshadow as a way to color resin is fantasitc, as long as you make sure you are thoroughly crushing the eyeshadow before adding it to resin for color, and follow the no more than 10% eyeshadow to resin as color rule.
Can you put nail polish in resin?
1. Mixing nail polish with resin is not an effective way to color resin. Clear polish should definitely not be used to color resin.
Is resin dye and alcohol ink the same?
What’s the Special: LET’S RESIN alcohol ink works a little different from other alcohol ink, which they don’t spread so much in resin due to their high-pigment, which allows you to control the colors more precisely and make some amazing and personalized effects in epoxy resin.
Do you epoxy before alcohol ink?
Once it’s dry, you can put your first layer of epoxy on the alcohol ink tumbler. Remove the tape and add a new piece on just a few mm above the paint line. I wanted a little bit of glitter in it so I added some glitter into my epoxy (totally optional!).
What is alcohol used for in resin?
Fill a spray bottle with rubbing alcohol and spritz the surface of the resin. The alcohol breaks the surface tension causing the bubbles to pop. The alcohol will evaporate quickly without affecting the resin.
What is liquitex acrylic ink used for?
Acrylic Ink is made by Liquitex, creators of the first artists’ acrylic in 1955. Use it for watercolor techniques, pouring, airbrushing, pen and ink, collage and mixed media.
What is epoxy resin alcohol ink?
Alcohol Inks are an ideal candidate for coloring resin because they are alcohol-based. The alcohol quickly evaporates and leaves pigment without disrupting the curing of the epoxy resin. With regards to inks, ONLY alcohol-based ones can be used in resin, NOT water-based ones such as acrylic inks or the like.
What glitter is best for resin?
If you want your glitter to be evenly mixed throughout the resin, you need to not use a “heavy” glitter. Instead opt for a fine, micro-glitter like Stampendous micro-glitter or something similar. Many experienced crafters also recommend that you wait before adding glitter to the resin.
Can you mix watercolor with resin?
Watercolors have a very low pigmentation. This means that only in very large quantities would they actually color the resin. In addition, the components epoxy resin – watercolor/watercolor are very difficult to mix. Oil paint contains lipids through the oil it contains, which do not combine with the resin.
