QA

How To Make Epic Resin Art

Is it expensive to make resin art?

Is Resin Art Expensive? Yes, Resin Art can be quite an expensive hobby. That’s mainly because the Epoxy Resin can be costly if you create bigger Resin artworks. That’s why also buying Resin Art pieces can cost a good amount of money.

What ingredients do you need to make resin art?

Need To Haves: Resin Art Tool Essentials ArtResin Epoxy Resin. ArtResin is available in multiple sizes from 8 oz to 10 gallons, depending on the size of your project. Gloves. Protect your hands with disposable gloves. Apron/Old Clothes. Plastic Drop Sheet: Masking Tape. Stands. Level. Plastic Container For Water Bath.

Is it easy to make resin art?

Mixing resin can be a little intimidating but once you get the process down it’s the same steps over and over: mix resin, pour, pop bubbles, layer resin, let cure… Regardless of the number of layers you put in your resin piece the basics are the same which makes it pretty easy to learn.

Do you need a heat gun for resin art?

Do I REALLY have to use a torch for surface bubbles in my resin? In short, YES a torch is the best tool to get rid of bubbles in epoxy resin. A hair dryer or heat gun doesn’t get hot enough to remove bubbles efficiently and can blow dust all over your wet resin.

How do you pour resin into molds?

How to cast resin into a silicone mold Step 1: Select your silicone mold. Silicone molds are great for casting resin. Step 2: Apply mold release. Spray a light mist of resin mold release to the mold. Step 3: Mix and pour resin. Step 4: Remove bubbles. Step 5: Let cure. Step 6: Demold the cured resin. Step 7: Wash your mold.

Can you use a lighter to get bubbles out of resin?

#1 – Using a UTility lighter, quickly go over the surface of the resin. (This is the fastest and most effective, so be sure to start with this tip. I recommend doing it 1 to 3 times as needed, with several minutes wait time in-between to allow the resin to cool.

Can I use a hair dryer instead of a heat gun?

As hair dryers and heat guns have very similar functions, you can use a hair dryer instead of a heat gun for certain applications. If you are removing labels/stickers, removing candle wax, or similar tasks then a hair dryer can be used instead of a heat gun.

Can I use hair dryer for epoxy resin?

Option 3: Turning a hair dryer into an epoxy dryer If there’s one thing resin bubbles can’t stand, it’s the heat. You can actually use a hair dryer to pop bubbles; however, the heat a hairdryer provides is less potent than that of a butane or propane torch.

How do I get bubbles out of my resin without a torch?

A small amount of baby powder can work to reduce bubbles in resin. If you are using colored resin, you can even choose a powder that matches the color of the resin you are using. Use a delicate paintbrush to dust in the powder, then tap out any extra before pouring.

How do you stop bubbles in resin?

To help prevent air bubbles from releasing into your resin, pre-seal natural materials such as wood and paper with a brush on or spray sealant prior to resining. Sealing creates a barrier and prevents trapped air from releasing and creating bubbles in the resin.

Can you mix resin in paper cups?

Perfect for mixing small batches resin, paint, stain, epoxy from 1 to 3 ounces. Cups are are wax coated. They are sturdy and smooth on the inside to help with complete mixing. They are flexible enough to make pouring easy.

What is the ratio for resin?

Typically, this is 1 : 1 or 2 : 1 between resin and hardener, but there are also much more complicated ones such as 100 : 45. You can usually find the details on the packaging or containers. The mixing ratio has to be very precise, otherwise the epoxy resin will not harden or it will not work optimally.

What material does resin not stick to?

Epoxy resin adhesives will bond all woods, aluminum and glass well. It does not bond to Teflon, polyethylene, polypropylene, nylon, or Mylar. It bonds poorly to polyvinyl chloride, acrylic and polycarbonate plastics. The only way to tell if an epoxy will bond to a material is to try it.

What can I use instead of resin?

Some resin alternatives are: Fimo. Clay. Slush Latex. Metal. Plastic. Concrete. Plaster. Alabaster.

What is the easiest resin to use?

Why? Relatively speaking, epoxy is the easiest to work with. It’s the most forgiving of beginner resin mistakes, plus it’s the easiest to mix and measure.

Can you use cake Moulds for resin?

One thing to keep in mind is if a mold is made of silicone you can use it for resin! Which means baking molds are fare game… just be aware that most resin molds are glossy (which leaves your piece with a glossy shine to the front!) whereas baking molds often leave your piece matte.

Can you use a lighter as a heat gun for resin?

Instead of a heat gun, you can use an alcohol burner, a soldering iron, a butane torch, or a 300mw engraving laser. Common household objects such as hair dryers, matches, lighters, clothing irons, or light bulbs might also work.

What is eat a bubble?

Eat-A-Bubble is used for removing air bubbles from table top epoxy. Spray Eat-A-Bubble over table top epoxy and let the mist fall on the surface to remove any air bubbles that might be trapped in the surface.