Table of Contents
4 Simple Steps MEASURE. With gloves on, pour equal amounts of resin and hardener into a mixing cup. MIX. Stir really well for at least 3 minutes. POUR. After making sure your piece is level, go ahead and pour ArtResin® over your work. WAIT. ArtResin® needs to sit for several hours in a dust-free space while it cures.
What is the mix ratio for art resin?
ArtResin epoxy resin comes in 2 parts ( a resin and a hardener ) and is a 1:1 mixing ratio.
What is the ratio of hardener to resin?
The ratio range for catalyst to resin is 1 to 2 percent hardener to the total volume of resin to be used. For example, four drops of hardener will be 1 percent of 1 ounce of resin. Adding more of less of the catalyst agent will speed up or slow down the curing time for the resin.
How do you calculate resin ratio?
To calculate the amount you will need, in metric, you will need work out the size of the volume you wish to fill, convert that to the capacity and finally convert to the required weight: Total Weight = (Width x Height x Depth) / 1000 divide by a thousand when mesuring in millimeters.
How do you mix resin and hardener for beginners?
Start by pouring 15 oz of resin into the measuring cup, followed by 15 oz of hardener, to give you 30 oz total. The 32 oz kit is the perfect amount for your project’s needs.
What happens if resin isn’t mixed enough?
If resin mixture is not mixed correctly, the unmixed material will stuck to the sides, it will create a soft spots.
What happens if you mix resin wrong?
Scrape the sides and bottom of the container as you mix: improperly mixed resin stuck to the sides and bottom won’t be able to catalyze and therefore won’t be able to cure, leaving sticky spots in your resin that just won’t harden.
How long should I mix resin?
Here are the steps to mix the resin After the two parts are poured at the correct ratio, mix them together thoroughly for a full 2 – 3 minutes with a mixing stick. Mix longer for larger quantities. Be sure to scrape the sides, corners, and bottom of the container several times during mixing.
How do you mix large amounts of resin?
Meter resin and hardener by volume as follows: Place the measuring stick in the bottom of the container. Pour the resin into the bucket until it reaches the resin fill line. Pour the hardener into the bucket until it reaches the hardener fill line. Mix thoroughly with the measuring/mixing stick (smaller batches).
How do you mix epoxy resin without bubbles?
8 Ways to Get Rid of Bubbles in Epoxy Resin #1 – Using a UTility lighter, quickly go over the surface of the resin. #2 – Warm your resin. #3 – Mix the resin and hardener slowly. #4 – Wait for 5 minutes after you’ve completed mixing the resin and hardener together.
How much resin do I need for a painting?
ArtResin self-levels at about 1/8” when it’s on a flat surface so as a general rule, every 4 oz of resin and hardener combined ( 2 oz resin mixed with 2 oz of hardener ) should cover about 1 square foot.
What can I use to stir resin?
The optimal tool for mixing resin and hardener must have straight sides. This will enable you to thoroughly mix even the material that sticks to the bottom and sides of the mixing container. For small quantities of epoxy resin, a flat spatula has proved to be a good choice. This works similar to a stirring rod.
What should resin look like when mixed?
When your first mix the two parts together, you should see they look cloudy or wavy. This is normal. You should notice, however, that the more you mix, the closer the mixture gets to clear.
How do you dry resin without a UV light?
Put your resin object in the sun if you don’t have a UV lamp. If you don’t want to bother with a UV lamp, you can simply set your resin object outside in the sun to cure. However, be aware that this could take longer or be less effective if you live in an area with a low UV index or the weather is overcast.
Can you dry resin with a hair dryer?
Resin curing Using Hair or Blow Dryer You can use a blow dryer or hair dryer to dry your resin art fast. To do this, simply plug in the dryer and blow it directly onto your resin art. But be cautious to not blow too hard and too warm.
Can you cure resin in the oven?
Curing times might be slightly different with other types of resin. So, set the oven to the lowest possible temperature (65 C, 150 F). Mix and pour your resin like normal and pop it in the oven on a baking tray for 5-8 minutes. 10 minutes seems to be the threshold of meltiness for those plastic moulds.
Why is my resin still soft after 24 hours?
Short Cure Time In most cases, the reason you have resin that bends is due to the fact that the resin needs more time to cure. After 24 hours, ArtResin will be at a 95% solidity rate. If you attempt to curve or move the resin before that 24 hour mark, the resin will likely bend.
How long do you let resin sit after mixing?
How do I properly spread ArtResin? Once you mixed your resin and hardener for 3 minutes, you’ll have approximately 40 minutes of working time to pour and spread your ArtResin before it starts to cure and gets too thick to work with.
Why is my resin cloudy when mixing?
Why Does My Resin Look Milky?! Milky resin happens when your resin is full of soooo many teeny tiny microbubbles that it makes the resin look cloudy. Most often, it happens when your resin is too COLD. Excitedly, you tear it open, mix your 1:1 ratio of resin and hardener for 3 solid minutes and pour it on your piece.
