Table of Contents
What is needed to epoxy cups?
Minimal Supplies Needed to Make an Epoxy Glitter Tumbler Cup turner. Disposable Gloves. Popsicle Sticks. Epoxy. Medicine Cups. Glitter. Tumbler. Mod Podge (Hard Coat or Dishwasher Safe).
What kind of cups can you epoxy?
When using a metal tumbler, Stainless Steel is the best bet for applying resin to your tumbler. The Epoxy Resin adheres better to the Stainless Steel than any other metal and it does not need a coat of paint. 3.1 Metal Tumblers. 3.2 Plastic Tumblers. 3.3 Glass or Ceramic Tumblers.
What all do I need to make tumblers?
Materials Stainless Steel Tumbler. Mod Podge. Glitter. Spray Paint. Epoxy Resin. Electrical or Painter’s Tape. Rubber gloves, stir sticks, plastic cups. Vinyl for Decals.
How many layers of epoxy should I put on a tumbler?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
Can I use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
How do you keep vinyl from peeling off tumblers?
Before you start, make sure your stainless steel tumbler or mug has been cleaned and dried. And clean the cup with rubbing alcohol. This helps to remove any remaining grease or residue that will prevent the vinyl from adhering properly. Let the vinyl cure on the cup for 48-72 hours to make sure it sticks well.
Is it safe to drink from epoxy tumblers?
ArtResin has been deemed safe for food contact once it has cured, but please keep food or beverages well away from ArtResin in its pre-cured liquid form. ArtResin is NOT edible or potable in either liquid or cured form. The maximum temperature cured ArtResin can come in contact with is 120F or 50C.
Is epoxy safe for tumblers?
Epoxy doesn’t have to be scary if you use it safely! Epoxy resin is popular for tumblers because it creates a beautiful, glass-like coating that protects everything within it, like your paint, glitter, and decals. But it’s important to handle epoxy safely to avoid exposure and potential allergic reactions.
Is epoxy and resin the same thing?
The most noticeable difference between these two compounds is their intended use. The Epoxy Coating Resin is intended for coating surface applications, while the Casting Resin is used mainly for jewelry, molds or figurines.
Is epoxy Food Safe?
The simple answer here is, yes, epoxy is generally safe around food in the short term. However once epoxy is fully cured for 30 days, it is an inert plastic and should be fine for incidental exposure to food. It is not antimicrobial. Epoxy is not safe to ingest (liquid or cured).
How long does an epoxy tumbler need to turn?
Once the entire surface has been evenly covered, allow it to turn until it is dry to the touch, within 18-24 hours. Once dry, remove the tape and allow it to finish curing. At 72 hours, it will have fully cured.
How much money do you make selling tumblers?
The salaries of Tumblers in the US range from $21,440 to $51,950 , with a median salary of $33,810 . The middle 60% of Tumblers makes $33,810, with the top 80% making $51,950.
Is there a substitute for epoxy?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Can you use Mod Podge instead of epoxy on tumblers?
Make sure to remove the tape before the Mod Podge dries! A way to make a decorated Yeti cup or Ozark tumbler without having to use epoxy. As you can see from the pictures, it’s not as smooth as epoxy but it still works and actually has a nice texture to it!.
What is an alternative to epoxy resin for tumblers?
Most are using our Brite Tone(BT) as an alternative to Epoxy. BT is a Waterbased product and is very high in solids so it builds quicker than any other Waterbased products. It is very different than epoxy as you have to use several thin layers versus 1 or 2 layers of epoxy.
Can you put epoxy over vinyl decals?
Sealing a wooden tray You can go ahead and paint it or spray paint it but just be sure to give it a really long time to dry before applying the vinyl. With a tray like this with vinyl on it, I would definitely recommend doing an epoxy resin. It’s so easy, relatively affordable and they last a long long time.
Do you sand between coats of epoxy?
First, sand down the entire surface of your piece with coarse sandpaper ( we use 80 grit sandpaper here at ArtResin ). Sanding epoxy resin between coats will not only get out the imperfection, but will also serve to provide some tooth between the first and second layers.
How long does epoxy need to dry before sanding?
Tip: The epoxy resin must be really dry before sanding. You should therefore allow a waiting period of at least 48 hours before processing. Follow the manufacturer’s instructions, as there are resins that take even longer to harden completely.
What is the difference between Mod Podge and epoxy resin?
The main difference between Mod Podge and resin is that Mod Podge is a PVA based glue product that has a small amount of sealant added to its formula. As the name suggests, an epoxy resin product is an actual resin that can be considerably more robust than a product like Mod Podge.
Can Mod Podge be used like resin?
Mod Podge Resin is the fun way to create beautiful resin projects. With the clear hardener and resin formulas, you can create custom pieces with a unique touch. Simply mix an equal 1:1 ratio of each formula to make your projects come to life. Use Mod Podge Alcohol Inks for adding color to any of your resin projects.
