Table of Contents
What is the Revolve tool in Fusion 360?
Fusion 360’s revolve tool is capable of creating surface features. The profile will be an open profile that will have complete dimensions that are linear. The centerline to the right of the open profile is a construction line that also mimics the linear dimensions placed on the right.
How do you use revolve?
Using the Revolve Tool Select a sketch. Click Revolve from the mini toolbar or the Shapes group. Select an axis for the revolve. Select Solid from the dashboard. Specify to revolve from a sketch plane by a specified angle value. Edit the angle to 180. Click Flip Direction. Click Thicken Sketch.
What is revolve tool?
ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.
What is revolve command in Creo?
Revolving is the method of creating a solid by drawing a closed profile and rotating. around an axis line. The profile may only be drawn on one side of the axis line, this will avoid. and intersecting material as the closed profile rotates around the axis.
How do you make an axis of revolution in Creo?
Make sure the model contains linear geometry to use as an axis of revolution. Click Model > Revolve. Select a sketch to revolve, or to create a sketch, click the Placement tab, click Define, sketch a section, and click OK. Click the collector.
How do you dimension diameter in revolve Creo?
If you need to put in diameter dimensions: Click normal, click the line or point you want the dimension for, click the centerline, and click the same line/point that you clicked the first time AGAIN, and then middle mouse button where you want the dimension to be placed.
How do you sketch a revolve?
Select an existing sketch and then click Model > Revolve. This method is referred to as object-action. Select a datum plane or planar surface to use as the sketching plane and then click Model > Revolve.
How do you do a revolve axis on Onshape?
Two directions Tap Revolve tool. Select Creation type: Solid – Create parts or modify existing parts by revolving a sketch region or face about an axis. Select a Result body operation type: Select Faces and sketch regions to revolve. Select an axis about which to revolve. Select a Revolve type: Tap checkmark.
What is fillet command in Fusion 360?
The Fillet command rounds the edges of a solid body in Fusion 360 by removing material from exterior edges or adding material to interior edges.
How do you make a revolve in Inventor?
Create a Revolved Feature On the ribbon, click 3D Model tab Create panel Revolve . Click on a workplane. Using the Sketch commands, draw the profile you want to revolve. Sketch or project an axis if not using an Origin axis. Click Finish Sketch. Specify the Feature Type.
What is the Revolve tool in Onshape?
This tutorial shows you how to use the Revolve tool to spin a 2D profile in a sketch on an exist of revolution. For example, you can revolve a circle to create a sphere. The Revolve tool is useful for creating symmetrical objects such as lampstands, candlesticks or table legs.
What does revolve mean Onshape?
Revolve Modeling: allows the user to create a profile and spin that profile around an axis line (As opposed. to extruding where the user extrudes in a direct linear direction (up/down, left/right, or. forward/backward). Revolve parts are used for symmetrically cylindrical parts (i.e cups, pots, crazy straws, tires, etc.
What is a revolved extrusion?
Revolved Extrusion command. Adds or removes material from a part by revolving sketch elements (A) around a user-defined axis of rotation (B). You define whether material is added or removed by cursor position while constructing the feature, or by setting options on command bar or by using short-cut keys.
How do you sweep in Creo?
How to Create Sweeps with Open Trajectories in Creo From the Model ribbon bar menu, open the Sweep tool. Select the trajectory. Sketch a section for sweeping or select a pre-defined section from the Sketcher Palette. If you selected a pre-defined section, edit the dimensions and reference point.
Can you use Edit Definition to change a revolved feature into an extruded feature?
With the Extrude tool, you can switch between different feature options while creating an extrusion. You can also edit the feature after it has been created by right-clicking the feature and using one of the editing tools: Edit Definition—Opens the Extrude tab where you redefine the feature.
Which of the following groups in the model tab contains the Extrude tool?
47. On the Model tab, click Extrude from the Shapes group. The Extrude tab opens.
How do you make a radius in Solidworks?
To change the placement of circular dimensions: Right-click the dimension. In the Dimension PropertyManager, select the Leaders tab. Under Witness/Leader Display, select a placement option. For example: Radius. Diameter. You can also right click the dimension and select Display Options.
How do you create a diameter dimension in Solidworks?
To create a diameter, move the pointer to the far side of the centerline. Click to place the dimension. for diametric dimensions. Select other lines or points in the sketch to create additional dimensions.
What are the required elements to create a revolved feature *?
Create a Revolved Feature from a Profile In the browser, select an unconsumed 2D sketch that represents a profile or cross-section of the revolved feature or body you want to create. On the ribbon, click 3D Model tab Create panel Revolve . In the Revolve dialog box, click Profile and then select the profile to revolve.
What is revolve boss?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces.
Where is revolve in Solidworks?
Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
How do you make a shaped cone shape?
but if you just need a cone here’s a quick guide: draw triangle. revolve (choose sketch face for face and vertical line for revolve axis) set full revolve to create a solid cone (I just opened a bit to show it’s solid inside).
