Table of Contents
Coagulation destabilises the particles’ charges. Coagulants with charges opposite to those of the suspended solids are added to the water to neutralise the negative charges on dispersed non-settable solids such as clay and organic substances.
What is coagulation process in water treatment?
Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
What is a coagulant for?
Coagulants are used to increase the size of aquatic substances, making them large enough to settle or to be removed by sand, dual layer filtration, or the membrane.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
Which coagulant is best?
A metal based coagulant will consume alkalinity, especially in a well buffered high pH water, which could compromise the softening process. The best coagulant is therefore a pre-hydrolysed species with a high basicity. PACl has been found to be very suitable for lime softening applications.
What is the chemical used for coagulation in water purification?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used. Coagulation is usually accomplished in two stages: rapid mixing and slow mixing.
What is water treatment process?
Water treatment is any process that improves the quality of water to make it appropriate for a specific end-use. The end use may be drinking, industrial water supply, irrigation, river flow maintenance, water recreation or many other uses, including being safely returned to the environment.
How effective is coagulation?
Several studies have reported the effectiveness of dual coagulants application when dealing with various types of wastewater where it can reduce up to 90% of COD, total suspended solids (TSS), turbidity, and colour.
What is coagulant used for?
In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What is the most commonly used coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
What is the most important step in water treatment?
It is, however, an important primary step in the water treatment process, because coagulation removes many of the particles, such as dissolved organic carbon, that make water difficult to disinfect. Because coagulation removes some of the dissolved substances, less chlorine must be added to disinfect the water.
What are the three main stages of water treatment?
There are three main stages of the wastewater treatment process, aptly known as primary, secondary and tertiary water treatment. In some applications, more advanced treatment is required, known as quaternary water treatment.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
What are some water treatment methods?
Top 7 Methods of Water Treatment
- Coagulation / Flocculation. Coagulation is adding liquid aluminum sulfate or alum and/or polymer to raw or untreated water.
- Sedimentation. When water and flocs undergo the treatment process, they go into sedimentation basins.
- Filtration.
- Disinfection.
- Sludge Drying.
- Fluoridation.
- pH Correction.
What are coagulant drugs?
Coagulation modifiers are drugs that act on the blood coagulation pathway in different places to prevent or promote blood clot formation. Anticoagulants and antiplatelet drugs are used to prevent blood clot formation.
What are the types of coagulation?
Types of coagulation tests
- Complete blood count (CBC) Your doctor may order a complete blood count (CBC) as part of your routine physical.
- Factor V assay. This test measures Factor V, a substance involved in clotting.
- Fibrinogen level.
- Prothrombin time (PT or PT-INR)
- Platelet count.
- Thrombin time.
- Bleeding time.
What are the common coagulants used?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What is coagulation process?
Coagulation is a process of combining particles, colloids, and dissolved organic material into larger aggregates (Amirtharajah and O’Melia, 1990). These aggregates are then removed from the water usually by clarification and filtration processes in most conventional WTWs.
What does coagulation mean?
Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.
What is the purpose of coagulation and flocculation in water treatment?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density.
What is difference between flocculation and coagulation?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
What is coagulant explain with example?
To induce coagulation, a coagulant (typically a metallic salt) with the opposite charge is added to the water to overcome the repulsive charge and “destabilize” the suspension. For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions.
