Table of Contents
Can you epoxy acrylic cups?
It is possible to put epoxy over plastic as long as it is not #5PP. Epoxy will not stick to this specific type of plastic. Plastic was not made to be smothered by a chemical, but it can be done. If you’re looking for a cheaper alternative try using acrylic tumblers.
What do I need to design a tumbler?
Materials Stainless Steel Tumbler. Mod Podge. Glitter. Spray Paint. Epoxy Resin. Electrical or Painter’s Tape. Rubber gloves, stir sticks, plastic cups. Vinyl for Decals.
Can you paint acrylic tumblers?
Step 3: Prepare the Paint Markers Acrylic paint markers are ideal for painting on plastic tumblers because they are easy to use, especially for people who are intimidated by paint brushes. The paint is also permanent.
What kind of cups can you epoxy?
When using a metal tumbler, Stainless Steel is the best bet for applying resin to your tumbler. The Epoxy Resin adheres better to the Stainless Steel than any other metal and it does not need a coat of paint. 3.1 Metal Tumblers. 3.2 Plastic Tumblers. 3.3 Glass or Ceramic Tumblers.
What epoxy is safe for tumblers?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
Can you mix resin in plastic cups?
To waste as few as possible epoxy resin, I used very small plastic cups for dipping. The exact material of this plastic cups is very important I learned. You should never use something which will react violently with the mixed epoxy resin, as you can see in the next picture.
Can you put resin on plastic tumblers?
Avoid using plastic tumblers for this project. Epoxy resin does not adhere to plastic and can peel off in time. If your tumbler has a small amount of plastic on it, you can cover it with a plastic-compatible spray paint to give the resin something to hang onto.
Can you use Mod Podge instead of epoxy?
Paper Mod Podge does all that wonders for you. It works as a sealant to your projects, you can gluwork your project with some classic mod podge and then use the Super Gloss over the top. So it gives you a very shiny, clear finish that looks like epoxy.
How do you keep vinyl from peeling off tumblers?
Before you start, make sure your stainless steel tumbler or mug has been cleaned and dried. And clean the cup with rubbing alcohol. This helps to remove any remaining grease or residue that will prevent the vinyl from adhering properly. Let the vinyl cure on the cup for 48-72 hours to make sure it sticks well.
How do you Epoxy a tumbler without a turner?
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
What kind of vinyl is used for tumblers?
Permanent vinyl is the best kind of vinyl to use for tumbler cups. Cricut Permanent vinyl will last really well. You can put this vinyl through the dishwasher but stainless steel tumblers hold up better if you hand-wash them.
Do I need to seal vinyl on tumblers?
I do not seal my vinyl on tumblers. Most vinyl manufacturers actually recommend that you don’t apply a sealer over the vinyl. The exception to this would be if you want to go through the process of sealing your tumbler with epoxy. This is usually done with glitter tumblers.
Is epoxy and resin the same thing?
The most noticeable difference between these two compounds is their intended use. The Epoxy Coating Resin is intended for coating surface applications, while the Casting Resin is used mainly for jewelry, molds or figurines.
How do you resin a cup?
Just measure and mix some additional clear resin and pour however much you need onto your cup. Use a stir stick to start pushing the resin around on the cup surface. Just barely touch the tip to the surface so that the components spread and do not mix too much.
What resin is food safe?
ArtResin Is Non-Toxic When Used As Directed And Is Safe For Food Contact Once Cured! Go ahead and resin your charcuterie board, serving tray, candy dish, or cheese board with complete confidence Not only is ArtResin: BPA Free.
Is it safe to drink from epoxy tumblers?
Their safety data sheet tells us that epoxy “causes severe skin irritation and eye damage. Harmful if swallowed. Avoid contact with the skin, eyes, and clothing.
Can you put epoxy on Starbucks cups?
Unlike epoxy, the Crystalac cures by evaporation so there is no chemical reaction between the plastic and the Crystalac which is a major reason why people advise not to put epoxy on your Starbucks Cups! Using Brite Tone is recommended on plastic surfaces and you always want to make sure your cup is properly prepped!Jul 17, 2020.
Why is my vinyl not sticking to Cup?
Still having trouble? If you have cleaned your surface well with rubbing alcohol but your vinyl is still not sticking, try leaving the transfer tape on the vinyl for a bit after applying it onto the surface. Sometimes the vinyl’s adhesive needs time to adhere to the surface a little better and bond.
Can you use Mod Podge spray on cups?
Spray clear, high shine Mod Podge to the outer cup. Add your choice of craft glitter. Shake to create an even layer of glitter. Let dry and then reassemble cup.
Can you use Mod Podge to seal vinyl on tumblers?
Just adding vinyl to mugs and wish they would last a little longer? Mod Podge is probably your safe bet, just don’t put them in the dishwasher.
