Table of Contents
Why do bars have arm rails?
Why install foot rails? Standing with one foot slightly raised and resting on something is considerable more comfortable while leaning against a bar. That is why most bars and pubs have them; if the patrons are more comfortable they will stay longer and spend more money.
What is bar arm rest?
Visually and functionally, installing bar rail molding (aka Chicago bar rail or wooden bar arm rests) adds professional polish to your DIY home or commercial bar project. Its primary function is to give your bar a finished perimeter and support your guests’ arms comfortably whether they are seated or standing.
What is the purpose of a bar rail?
A bar rail is the longer rail that hangs directly below the top of a bar. The purpose of it is to make a bar look complete and also someplace to hang your purse or jacket when visiting your favorite pub. If you are looking to install your very own, then you will need the essential materials to create it.
How high should a footrest be on a bar?
Standard bar foot rail height is about 6 inches. The bar rail height is measured from the floor to the center of the tubing. So, this means that the center of the rail should be about 6 inches off the ground to provide the best comfort for the bar patrons.
What is a bar speed rail?
Bar speed rails, or bottle racks, provide a place to store your most needed bottles of liquor and mixers close at hand, making service faster and raising potential profitability.
Why do bars have foot rests?
A foot rail allows us to redistribute the load on our feet—first one foot, then the other—and alter the tilt of our spines. The legs of bar stools bump into them; the feet of customers can get entangled when dethroning, especially if tipsy.
What is the brass rail around a bar?
In its simplest form,bar rail is an ornamental wood element that will outline your bar. By outlining the bar it is the first element that people encounter when they sit down or lean against the bar.
How high is a drink rail?
The height of the drink rail should match the bar top height, which is 42” – 45”. The drink rail should be 10” – 12” deep and should have a 4” backsplash. Plan 18” for the customer activity zone (24” if using bar stools). Always include a 36” activity zone for ADA and wait staff.
Why do bars have bars?
It’s because the counter where drinks are served acts as a “bar” or barrier between the territory the drinkers occupy and that reserved to the staff. This demarcation often has legal force: staff and customers are not allowed to socialise informally together over alcoholic drinks on the same side of the “bar”.
How far is Footrail from bar?
As stated above, a secure and safe foot rail should have a bracket six inches from each end of the bar and every four feet from that point on. To round a corner, you will connect two pieces of tubing with an elbow joint.
Why should drinks be made on the rail of a bar?
The front bar or top of the bar also has a section called the rail. Drinks should be made here because: The customers like to see the bartender make the drink and verify the amount of alcohol poured. It makes a good workstation, and the bartender is very efficient making drinks there.
How far does a bar top overhang?
The bar top overhang should be a minimum of 8-1/2” and could be as much as 10” so your knees do not hit the bar front. For our extra tall customers the 10” overhang maybe necessary.
How long should a home bar be?
Most standard home bar designs are at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools. You’ll also want to think about the shape that you’d like your bar to be.
How thick should a bar top be?
Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide. The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.
What is a jigger?
A jigger is a small parasitic flea that burrows into the skin of a warm-blooded host before laying eggs. They generally attack feet or hands. People suffering with jiggers usually attempt to remove them with safety pins, thorns, or other sharp, and often unsanitary, objects.
What is ice bin in bar?
Ice Bin/Cocktail Units Are Used For Commercial Ice Storage And Beverage Service. Ice Bin/Cocktail Units are used for cocktail and beverage operations. Configurations include combinations of ice bins, bottle storage, and drainage provisions. Ice Bins are foam insulated, heavy duty stainless steel.
What is a bar speed well?
Speed rack: In most bars I’ve seen, the well brands reside in the speed rack, also called a speed rail or speed well. It’s usually at the level of the bartender’s thigh, near the ice well. Having commonly used bottles in the speed rack allows the bartender to make drinks more efficiently.
Why do bars have a bar on the floor?
Turns out, humans aren’t really designed to stand for long periods with feet flat on the floor. This contributes to stress on the spine, and you can feel it in your lower back. A foot rail allows us to redistribute the load on our feet—first one foot, then the other—and alter the tilt of our spines.
