Table of Contents
Mount a power strip to a table or make it inconspicuous by mounting and hiding it behind a desk or other furniture. You can get this job done without tools using Scotch® Indoor Mounting Tape. Just apply the tape to the bottom of the power strip and then attach the power strip to the wall.
How do you attach a power strip to a desk?
Most power strips come with notches on the back where you can easily slide it onto screws for mounting. In this case, all you have to do is measure the distance between the notches, install the screws that far apart on your desk or wall, and hook it on, tightening the screws after to make sure it’s a snug fit.
Can double-sided tape hold a power strip?
Adhesive CANOPUS 3M Double-Sided Tape Double-sided 3M tape is perfect for wire management. This tape is extremely strong and is great for sticking power bars and other, heavier, cables in place. You can use this tape to attach your power bars under your desk to keep them out of the way.
Can you Velcro a power strip?
Mount devices to walls and desks Fix power strips, remotes and controls to desks and walls with VELCRO® Brand Professional Series adhesive-backed fasteners. This will keep these devices out of sight and they’ll be easy to peel off for frequent usage and potential upgrades and replacement.
How do you keep a power strip under a desk?
The easiest way to hide a power strip is to obscure it behind furniture. Set the power strip behind the TV stand, desk, or sofa that it’s next to. Simply slide your furniture out a few inches to give the power strip some space for air flow and keep it from resting directly against any furniture.
Can I mount a power strip?
It is easier to attach the power strip this way because you don’t need to drill holes on the wall or furniture, and you can mount the power strip in any direction on the wall and under the counter.
What is cable management on a desk?
A cable management compartment like a tray or raceway attaches to the underside of your desk and helps you both guide and hide cables. Popular cable management compartments are the IKEA Signum and the J Channel from Amazon. Grab one and slap it under your desk and bam, your desk now has cable management features.
How do you mount a power strip to a wall without screws?
Attach Beta steel tape to the power strip Place the power strip on a hard surface with its back facing you. Remove the liner from the first Beta Steel Tape and place it on the power strip so that the left of the Beta Steel Tape touches the “L” mark on the left edge of the power strip.
What screws to use for mounting power strips?
#8 wood screws seem to work with most key hole slots but if they are too big, use #6 screws. You may need to play around the depth of the screws a bit to make sure they all fit into the key hole slots but are snug doing so. Place it over the screws and slide it in place and you’re done!.
How do you put a power brick under a desk?
How to Mount a Power Strip (and Power Bricks) Under Your Desk Step 1: Shop for Parts. The parts you’ll need are pretty modest. Step 2: Cut the Basket. Next arrange the surge protector, cables, and power bricks in the tray and make sure they all fit. Step 3: Mount It. Step 4: Place Everything Into the Basket. Step 5: Enjoy!.
Can you use adhesive tape on wires?
Wire connectors are essentially insulated caps with internal threading. Usually made from plastic, they are intended to be applied to the end of a stripped wire. Other types of adhesive tapes are not generally recommended as a substitute for electrical tape when in direct contact with wiring or circuitry.
Can you use duct tape cable management?
Duct tape can often be a photographer’s best friend. Cable management can often be a nightmare. Start by tearing off a piece of duct tape long enough to wrap around the looped cable once plus about two extra inches of tape. Next, tear the tape straight down the middle on each end.
Is Velcro a fire hazard?
Rated for electrical cable management in plenum space Only the VELCRO® Brand ONE-WRAP® FR Tape is a fire retardant hook and loop fastener that complies to NEC standards (section 300.22, C and D).
Are some surge protectors better than others?
A higher joule rating is the best indicator of greater protection. Choose a surge protector with a joule rating at the very least in the 200 to 400 range. Sensitive or costly equipment, such as computers, displays and audio/video equipment, warrants a joule rating of at least 1000.
Is it safe to cover a power strip?
If the power strip feels warm or hot, unplug it and replace it immediately. Never hide or cover a power strip or extension cord with anything such as a rug. Electricity generates heat and that heat needs to disperse. If the cord is covered the heat becomes trapped and the risk for a fire greatly increases.
Why do power strips catch fire?
The wires inside power strips tend to be cheap and lower quality than the wires you find in your walls, so when you start chaining power strips, you lose a lot of electricity capacity in the process. Plugging in an appliance with high power usage will heat up those low-quality wires until they burst into flames.
Can I connect a power strip to a surge protector?
Yes, you can plug a power strip into a surge protector. Surge protectors cost more because they provide surge protection mechanisms. If you have to choose between the two, you are better off using a surge protector, especially if you want to power sensitive gadgets like computers.
